Experimental study of PCD tool performance in drilling (Al2O3)p/6061 metal matrix composites

被引：0

作者：

Ramulu, M ^{[1
]}

Kim, D ^{[1
]}

Kao, H ^{[1
]}

Rao, PN ^{[1
]}

机构：

[1] Univ Washington, Dept Mech Engn, Seattle, WA 98195 USA

来源：

TRANSACTIONS OF THE NORTH AMERICAN MANUFACTURING RESEARCH INSTITUTION OF SME, VOL XXXI, 2003 | 2003年

关键词：

D O I：

暂无

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Experiments were conducted by using PCD drills to drill Al2O3 particulate reinforced aluminum-based metal matrix composite. Cutting parameters which were considered included cutting speed, feed rate, and volume fraction of reinforcement. The Analysis of Variance (ANOVA), Response Surface Methodology (RSM) were used to analyze experimental data and develop regression models. Drilling forces were significantly influenced by feed rate while drilling speed had no effect on degree of thrust force and torque. Drilling feed rate is the major factor to average surface roughness values. The drilled hole surface is negatively skewed due to particle reinforcements and built up edge.

引用

页码：169 / 175

页数：7

共 50 条

[31] AL2O3 FIBER STRENGTH DEGRADATION IN METAL AND INTERMETALLIC MATRIX COMPOSITES
DRAPER, SL
LOCCI, IE
JOURNAL OF MATERIALS RESEARCH, 1994, 9 (06) : 1397 - 1411
[32] An Experimental Investigation on the Machinability of Al2O3 in Vibration-Assisted Turning Using PCD Tool
Amini, S.
Khosrojerdi, M. R.
Nosouhi, R.
Behbahani, S.
MATERIALS AND MANUFACTURING PROCESSES, 2014, 29 (03) : 331 - 336
[33] A6061/(Al2O3)p fracture behaviour
Forn, A
Baile, MT
Rupérez, E
Martín, E
Rapoport, A
BOLETIN DE LA SOCIEDAD ESPANOLA DE CERAMICA Y VIDRIO, 2004, 43 (02): : 434 - 437
[34] On the hot working characteristics of 6061Al-SiC and 6061-Al2O3 particulate reinforced metal matrix composites
Murty, SVSN
Rao, BN
Kashyap, BP
COMPOSITES SCIENCE AND TECHNOLOGY, 2003, 63 (01) : 119 - 135
[35] Development and Mechanical Characterisation of Al6061-Al2O3-Graphene Hybrid Metal Matrix Composites
Boppana, Satish Babu
Dayanand, Samuel
Murthy, Bharath Vedashantha
Nagaral, Madeva
Telagu, Aravinda
Kumar, Vijee
Auradi, Virupaxi
JOURNAL OF COMPOSITES SCIENCE, 2021, 5 (06):
[36] THE AGE-HARDENING CHARACTERISTICS OF AN AL-6061/AL2O3 METAL-MATRIX COMPOSITE
WANG, JT
FURUKAWA, M
HORITA, Z
NEMOTO, M
MA, Y
LANGDON, TG
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1995, 26 (03): : 581 - 587
[37] Fluidity of Al based metal matrix composites containing Al2O3 and SiC particles
Emamy, M.
Abbasi, R.
Kaboli, S.
Campbell, J.
INTERNATIONAL JOURNAL OF CAST METALS RESEARCH, 2009, 22 (06) : 430 - 437
[38] Solidification characteristics of Al–Si–Mg–Fe/Al2O3 metal matrix composites
Mitja Petrič
Jožef Medved
Matej Dolenc
Primož Mrvar
Journal of Thermal Analysis and Calorimetry, 2015, 122 : 563 - 570
[39] Modeling of Wear Behavior of Al-Si/Al2O3 Metal Matrix Composites
Megahed, M.
Saber, D.
Agwa, M. A.
PHYSICS OF METALS AND METALLOGRAPHY, 2019, 120 (10): : 981 - 988
[40] FABRICATION OF AL2O3 FIBER PREFORM WITH GAMMA-AL2O3 POWDER BINDER FOR 6061-ALLOY MATRIX COMPOSITES
SUGANUMA, K
NAGATOMO, K
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1994, 188 (1-2): : 353 - 361

← 1 2 3 4 5 →