Kinetic and friction analyses of a preloaded double nut ball-screw

被引：0

作者：

Wei, Chin-Chung ^{[1
]}

Hsu, Tung-Hao ^{[1
]}

机构：

[1] Natl Formosa Univ, Dept Power Mech Engn, 64 Wunhua Rd, Huwei 63208, Yunlin, Taiwan

来源：

PROCEEDINGS OF MALAYSIAN INTERNATIONAL TRIBOLOGY CONFERENCE 2015 | 2015年

关键词：

Preload; double nut; friction; MECHANISM;

D O I：

暂无

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

High speed transmission table is wildly used in industry and its demand is increased. Preloaded ball-screw device is a major component in a transmission system. In order to bear applied load, preload and inertia force, double-nut ball-screw is necessary. Each nut has two ball cycles, the kinematic behavior and friction of ball and raceway are more complex than double-cycles ball-screw. A new calculating concept is used to simplified complex calculation. Contact and friction were found out at each cycle and they are varied with operating conditions, such as applied axial load and rotational speed. The study is helpful in realizing contact and friction behavior in a preloaded double-nut ball-screw.

引用

页码：131 / 132

页数：2

共 50 条

[21] Investigation of the fluctuation of the static axial rigidity for double-nut preloaded ball screws
Wang, Kai
Zhou, Chang-guang
Ou, Yi
ADVANCES IN MECHANICAL ENGINEERING, 2019, 11 (01)
[22] Kinematical analyses and transmission efficiency of a preloaded ball screw operating at high rotational speeds
Wei, Chin-Chung
Lai, Ruei-Syuan
MECHANISM AND MACHINE THEORY, 2011, 46 (07) : 880 - 898
[23] Static model and reliability analysis of double nut ball screw considering screw bending
Zhao, Jinsong
Zhao, Chunyu
Jiang, Zhiyuan
Liu, Chang
Xu, Mengtao
Wen, Bangchun
TRIBOLOGY INTERNATIONAL, 2023, 187
[24] Sparse identification for ball-screw drives considering position-dependent dynamics and nonlinear friction
Liu, Xu
Li, Yingguang
Cheng, Yinghao
Cai, Yu
ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING, 2023, 81
[25] Minimization of Energy Dissipated in a Ball Screw-nut with All Kinds of Friction
Izumi, Teruyuki
Li, Zuowei
Zhou, Hai
Kanesaka, Masashi
2008 IEEE/ASME INTERNATIONAL CONFERENCE ON ADVANCED INTELLIGENT MECHATRONICS, VOLS 1-3, 2008, : 1302 - +
[26] The research of double-nut ball screw preload based on GMA
Lin, Mingxing
Wang, Qingdong
Ju, Xiaojun
Fan, Wentao
2016 13TH INTERNATIONAL CONFERENCE ON UBIQUITOUS ROBOTS AND AMBIENT INTELLIGENCE (URAI), 2016, : 566 - 569
[27] Experiment and mechanical properties prediction on ball-screw inerter
Sun, Xiao-Qiang
Chen, Long
Wang, Ruo-Chen
Zhang, Xiao-Liang
Chen, Yue-Xia
Zhendong yu Chongji/Journal of Vibration and Shock, 2014, 33 (14): : 61 - 65
[28] A modeling method for predicting friction torque of the preload double-nut ball screw based on thermal elastohydrodynamic lubrication
Jiajia Zhao
Baobao Qi
Xianchun Song
Hongkui Jiang
Pengfei Dong
The International Journal of Advanced Manufacturing Technology, 2023, 124 : 4231 - 4251
[29] A modeling method for predicting friction torque of the preload double-nut ball screw based on thermal elastohydrodynamic lubrication
Zhao, Jiajia
Qi, Baobao
Song, Xianchun
Jiang, Hongkui
Dong, Pengfei
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2023, 124 (11-12): : 4231 - 4251
[30] High frequency harmonic cancellation in ball-screw drives
Hosseinkhani, Yasin
Erkorkmaz, Kaan
FIFTH CIRP CONFERENCE ON HIGH PERFORMANCE CUTTING 2012, 2012, 1 : 615 - 620

← 1 2 3 4 5 →