Comparison of Different Biaxial Tests for the Inverse Identification of Sheet Steel Material Parameters

被引：36
|
作者：
Schmaltz, S. [1 ]
Willner, K. [1 ]
机构：
[1] Univ Erlangen Nurnberg, Dept Mech Engn, Inst Appl Mech, D-91054 Erlangen, Germany
来源：
STRAIN | 2014年 / 50卷 / 05期
关键词：
anisotropy; computational plasticity; FEMU; parameter identification; sheet steel; TENSILE TESTS; METALS; OPTIMIZATION; COMPOSITE; BEHAVIOR;
D O I：
10.1111/str.12080
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The aim of this work is to compare different biaxial specimen geometries and loading conditions concerning their applicability as experimental database for an inverse finite element model updating procedure to identify the material parameters of sheet steel. Therefore, the deformation of the specimens is recorded with an optical, three-dimensional full-field deformation measurement system, and the utilised displacement data at the surface of the specimens are calculated via digital image correlation. The numerical material model for the simulations is based on a three-dimensional, anisotropic elasto-plastic ansatz and is implemented into a commercial finite element software code. The material parameters that are identified with the different specimen geometries are the hardening variables and the anisotropic plastic values. Based on the identification results, a selection criterion for the evaluation of specimen geometries for the inverse parameter identification is presented.
引用
收藏
页码：389 / 403
页数：15
相关论文
共 50 条
  • [21] Identification of material parameters at high strain rates using ballistic impact tests and inverse finite element analysis
    Levadnyi, Ievgen
    Liu, Fujia
    Gu, Yaodong
    AIP ADVANCES, 2024, 14 (04)
  • [22] An inverse technique for determining the material property parameters of sheet metal after stamping
    Jiang, Chao
    Li, Chao
    Tao, Yourui
    Qiche Gongcheng/Automotive Engineering, 2012, 34 (04): : 373 - 378
  • [23] INVERSE IDENTIFICATION METHOD FOR MATERIAL PARAMETERS ESTIMATIONS - ANALYSIS OF EXPERIMENTS
    Rojicek, Jaroslav
    EXPERIMENTALNI ANALYZA NAPETI 2009/EXPERIMENTAL STRESS ANALYSIS, PROCEEDINGS, 2009, : 220 - 227
  • [24] Identification of material parameters through inverse finite element modelling
    Evans, Sam
    Avril, Stephane
    COMPUTER METHODS IN BIOMECHANICS AND BIOMEDICAL ENGINEERING, 2012, 15 (01) : 1 - 2
  • [25] Inverse optimization and identification method for virtual material parameters of joints
    Cui F.-Y.
    Hua D.-X.
    Li Y.
    Li P.-Y.
    Zhendong Gongcheng Xuebao/Journal of Vibration Engineering, 2019, 32 (02): : 215 - 223
  • [26] Identification of material parameters of Barlat 1991 model by inverse method
    Advanced Technology for Vehicle Body Design and Manufacture Key Laboratory, Hunan University, Changsha 410082, China
    Jixie Gongcheng Xuebao, 2006, 4 (47-51):
  • [27] Experimental identification of dynamic parameters for steel beams by inverse analysis
    Abdel-Mooty, M. N.
    Elshazly, H. A.
    Anwar, A. M.
    INVERSE PROBLEMS IN SCIENCE AND ENGINEERING, 2009, 17 (01) : 3 - 15
  • [28] Constrained mixture modeling affects material parameter identification from planar biaxial tests
    Maes, Lauranne
    Fehervary, Heleen
    Vastmans, Julie
    Mousavi, S. Jamaleddin
    Avril, Stephane
    Famaey, Nele
    JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS, 2019, 95 : 124 - 135
  • [29] Identification of Sheet Metal Constitutive Parameters Using Metamodeling of the Biaxial Tensile Test on a Cruciform Specimen
    Parreira, Tomas G.
    Marques, Armando E.
    Sakharova, Nataliya A.
    Prates, Pedro A.
    Pereira, Andre F. G.
    METALS, 2024, 14 (02)
  • [30] An inverse method for the identification of strain-rate sensitivity parameters of sheet steels
    Avalle, M
    Belingardi, G
    Gamarino, M
    STRUCTURES UNDER SHOCK AND IMPACT VIII, 2004, 15 : 13 - 22
12345