Tribological behavior of sustainable carbon based composite coating for wear resistance applications

被引：6
|
作者：
Tyagi, Ankit [1 ]
Pandey, S. M. [1 ]
Gupta, Kalpna [1 ]
Walia, R. S. [1 ,3 ]
Murtaza, Qasim [1 ]
Krishen, Kumar [2 ]
机构：
[1] Delhi Technol Univ, Dept Mech Engn, Delhi 110042, India
[2] NASA, Johnson Space Ctr, Houston, TX USA
[3] Punjab Engn Coll, Dept Prod & Ind Engn, Chandigarh, India
来源：
MATERIALS RESEARCH EXPRESS | 2019年 / 6卷 / 12期
关键词：
carbon based composite coating; residual stress; micro-hardness; wear test; DIAMOND COATINGS; CYLINDER LINER; NI-P; TEMPERATURE; FRICTION; HVOF;
D O I：
10.1088/2053-1591/ab52b4
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The principal aim of the present study is to develop carbon based composite coating for wear resistance, having excellent tribological properties and enhanced mechanical properties using atmospheric plasma spray coating technique. FESEM, and HRXRD results confirms the presence of Cr3C2, MoO2 and Mo2C along with Cr2C2, hard phased in the carbon based composite coating. The carbon based composite coating was wear tested at variable temperature, the hardness and residual stress of the coating increases with increase in wear temperature, due to the formation of oxides and carbide in the coating. The experimental result shows that carbon based composite coating was temperature dependent and at 350 ;C temperature; lowest COF (0.08), wear (105 micron) and frictional force (3 N) was obtained.
引用
收藏
页数：8
相关论文
共 50 条
  • [41] Tribological behavior of carbon nanofiber-zirconia composite
    Hvizdos, Pavol
    Puchy, Viktor
    Duszova, Annamaria
    Dusza, Jan
    SCRIPTA MATERIALIA, 2010, 63 (02) : 254 - 257
  • [42] SiC wear resistance coating with added Ni, for carbon/carbon composites
    Chen Zishan
    Li Hejun
    Fu Qiangang
    SURFACE & COATINGS TECHNOLOGY, 2012, 213 : 207 - 215
  • [43] Tribological behavior of polyurethane-based composite coating reinforced with TiO2 nanotubes
    Song, Hao-Jie
    Zhang, Zhao-Zhu
    Men, Xue-Hu
    EUROPEAN POLYMER JOURNAL, 2008, 44 (04) : 1012 - 1022
  • [44] Analysis of the wear behavior and corrosion resistance of CoCrFeNiMn-2% CNTs laser cladding composite coating
    Luo, Fangyan
    Wang, Shanshan
    Shi, Wenqing
    Xiong, Zhengye
    Huang, Jiang
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2024, 30 : 6910 - 6923
  • [45] Microstructure and wear resistance of nickel-carbon nanotube composite coating from brush plating technique
    Tan, J
    Yu, T
    Xu, B
    Yao, Q
    TRIBOLOGY LETTERS, 2006, 21 (02) : 107 - 111
  • [46] Preparation of the Multi-Walled Carbon Nanotubes/Nickel Composite Coating with Superior Wear and Corrosion Resistance
    Li, Xuewu
    Gu, Yang
    Shi, Tian
    Peng, Dai
    Tang, Mingkai
    Zhang, Qiaoxin
    Huang, Xingjiu
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2015, 24 (12) : 4656 - 4663
  • [47] Microstructure and wear resistance behavior of Ti-C-B4C-reinforced composite coating
    Zhao, Yu
    Yu, Tianbiao
    Chen, Liaoyuan
    Chen, Ying
    Guan, Chuang
    Sun, Jiayu
    CERAMICS INTERNATIONAL, 2020, 46 (16) : 25136 - 25148
  • [48] Effects of temperature and normal load on tribological behavior of nickel-based high temperature self-lubricating wear-resistant composite coating
    Liu, Xiu-Bo
    Liu, Hai-Qing
    Liu, Yuan-Fu
    He, Xiang-Ming
    Sun, Cheng-Feng
    Wang, Ming-Di
    Yang, Hong-Bing
    Qi, Long-Hao
    COMPOSITES PART B-ENGINEERING, 2013, 53 : 347 - 354
  • [49] Preparation of the Multi-Walled Carbon Nanotubes/Nickel Composite Coating with Superior Wear and Corrosion Resistance
    Xuewu Li
    Yang Gu
    Tian Shi
    Dai Peng
    Mingkai Tang
    Qiaoxin Zhang
    Xingjiu Huang
    Journal of Materials Engineering and Performance, 2015, 24 : 4656 - 4663
  • [50] Tribological behavior of carbon nanotube composite coatings on C/C composite
    An, JW
    Lim, DS
    JOURNAL OF CERAMIC PROCESSING RESEARCH, 2002, 3 (03): : 118 - 122
12345