Ion beam assisted deposition and characterization of Zr-based multilayered coatings

被引：14
|
作者：
Zhang, J. J. [1 ]
Wang, M. X. [1 ]
Yang, J. [1 ]
Li, D. J. [1 ]
机构：
[1] Tianjin Normal Univ, Coll Phys & Elect Informat Sci, Tianjin 300074, Peoples R China
来源：
SURFACE & COATINGS TECHNOLOGY | 2007年 / 201卷 / 15期
基金：
中国国家自然科学基金;
关键词：
IBAD; ZrN/W; multilayered coating; superlattice;
D O I：
10.1016/j.surfcoat.2006.09.031
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
ZrN/W multilayered coatings with different nanoscale modulation periods have been synthesized at different deposition time using ion beam assisted deposition. XRD, AES, Nanoindenter and profiler were employed to investigate the influence of modulation period on microstructure and mechanical properties of the coatings. The results showed that all superlattice coatings almost revealed higher mechanical property than the monolithic ZrN and W coatings. At modulation period of 8.6 nm, XRD pattern showed a significant mixture of strong ZrN (I 11), W (110), as well as weak ZrN (220) textures. It possessed the highest hardness (similar to 26 GPa), elastic modulus (similar to 310 GPa), and fracture resistance (similar to 80 mN), compared with the ones with other modulation period. (c) 2006 Elsevier B.V. All rights reserved.
引用
收藏
页码：6812 / 6815
页数：4
相关论文
共 50 条
  • [31] Preparation and Characterization of ITO Thin Films Deposition by Ion Beam Assisted Deposition
    Kim, Sung Jin
    Choi, Kyoon
    Choi, Se Young
    KOREAN JOURNAL OF METALS AND MATERIALS, 2014, 52 (06): : 475 - 484
  • [32] In Situ Synthesis and Characterization of Zr-Based Amorphous Composite by Laser Direct Deposition
    Ye, Xiaoyang
    Bae, Heehun
    Shin, Yung C.
    Stanciu, Lia A.
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2015, 46A (09): : 4316 - 4325
  • [33] In Situ Synthesis and Characterization of Zr-Based Amorphous Composite by Laser Direct Deposition
    Xiaoyang Ye
    Heehun Bae
    Yung C. Shin
    Lia A. Stanciu
    Metallurgical and Materials Transactions A, 2015, 46 : 4316 - 4325
  • [34] ION-BEAM-ASSISTED DEPOSITION AND ION-BEAM SYNTHESIS OF WEAR RESISTANT COATINGS ON TECHNICAL SURFACES
    KLUGE, A
    JAVADI, BHS
    RUOFF, H
    OCHSNER, R
    RYSSEL, H
    SURFACE & COATINGS TECHNOLOGY, 1992, 51 (1-3): : 237 - 242
  • [35] MICROSTRUCTURAL AND TRIBOLOGICAL CHARACTERIZATION OF MOSX COATINGS PRODUCED BY HIGH-ENERGY ION-BEAM-ASSISTED DEPOSITION
    GROSSEAUPOUSSARD, JL
    MOINE, P
    VILLAIN, JP
    THIN SOLID FILMS, 1993, 224 (01) : 52 - 57
  • [36] Thermal stability and microstructure characterization of CrN/WN multilayer coatings fabricated by ion-beam assisted deposition
    Tsai, YZ
    Duh, JG
    SURFACE & COATINGS TECHNOLOGY, 2005, 200 (5-6): : 1683 - 1689
  • [37] CHARACTERIZATION OF TIN COATINGS PREPARED BY ION-BEAM-ENHANCED DEPOSITION
    LI, XY
    WANG, FJ
    MA, TC
    WANG, YK
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1991, 139 : 225 - 229
  • [38] Engineered nanocrystallites for enhanced performance of ceramic coatings by ion beam assisted deposition
    Namavar, F
    Haupt, J
    Tobin, E
    Karimy, H
    Trogolo, J
    Colter, P
    Yoganathan, M
    Jollimore, C
    Bricault, R
    Hirvonen, JP
    Ayer, R
    MATERIALS MODIFICATION AND SYNTHESIS BY ION BEAM PROCESSING, 1997, 438 : 697 - 708
  • [39] Zn-Cr alloy coatings produced by ion beam assisted deposition
    Alonso, F
    Madina, V
    Viviente, JL
    Mursell, T
    Onate, JI
    SURFACE & COATINGS TECHNOLOGY, 1998, 104 : 87 - 92
  • [40] Ion beam assisted deposition of corrosion resistant coatings in the coil coating mode
    Wolf, GK
    Preiss, G
    Guzman, L
    SURFACE & COATINGS TECHNOLOGY, 2000, 128 : 28 - 35
12345