Microstructural evolution of thermal barrier coatings during isothermal oxidation

被引：3
|
作者：
Salazar, A. [1 ]
Gomez-Garcia, J. [1 ]
Poza, P. [1 ]
Utrilla, V. [1 ]
机构：
[1] Univ Rey Juan Carlos, Dept Ciencia & Ingn Mat, ESCET, C-Tulipan S-N, Madrid 28933, Spain
来源：
LAYERED, FUNCTIONAL GRADIENT CERAMICS, AND THERMAL BARRIER COATINGS: DESIGN, FABRICATION AND APPLICATIONS | 2007年 / 333卷
关键词：
thermal barrier coatings; thermal spray; oxidation; heat treatment; scanning electron microscopy; transmission electron microscopy; X ray diffraction;
D O I：
10.4028/www.scientific.net/KEM.333.269
中图分类号：
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
This paper analyses the degradation of a ceramic top coating 70%ZrO2 - 30%CaO deposited onto a stainless steel AISI 304 by thermal spray, using Ni-6%Al-5%Mo as overlay coating. These thermal barrier coatings were heat treated for 48, 120 and 288 h at 800 degrees C to evaluate the degradation of these materials by isothermal oxidation. The microstructure evolution during oxidation was analysed by environmental scanning electron microscopy, transmission electron microscopy and X ray microanalysis. A thermally grown oxide layer was observed between the overlay coating and the ceramic top coating after oxidation. This layer was formed by a mixed Al, Ni and Mo oxides.
引用
收藏
页码：269 / +
页数：2
相关论文
共 50 条
  • [31] Microstructural Evolution and Sintering of Suspension Plasma-Sprayed Columnar Thermal Barrier Coatings
    Aranke, Omkar
    Gupta, Mohit
    Markocsan, Nicolaie
    Li, Xin-Hai
    Kjellman, Bjoern
    JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2019, 28 (1-2) : 198 - 211
  • [32] Microstructural evolution and failure mechanisms of thermal barrier coatings under extreme environmental conditions
    Fan, Jiabin
    Wang, Quansheng
    Ning, Xianjin
    Li, Li
    Sun, Zhenning
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2025, 45 (05)
  • [33] Microstructural Evolution and Sintering of Suspension Plasma-Sprayed Columnar Thermal Barrier Coatings
    Omkar Aranke
    Mohit Gupta
    Nicolaie Markocsan
    Xin-Hai Li
    Björn Kjellman
    Journal of Thermal Spray Technology, 2019, 28 : 198 - 211
  • [34] Cracking in and around the thermally grown oxide in thermal barrier coatings:: A comparison of isothermal and cyclic oxidation
    Echsler, H
    Shemet, V
    Schütze, M
    Singheiser, L
    Quadakkers, WJ
    JOURNAL OF MATERIALS SCIENCE, 2006, 41 (04) : 1047 - 1058
  • [35] Cracking in and around the thermally grown oxide in thermal barrier coatings: A comparison of isothermal and cyclic oxidation
    H. Echsler
    V. Shemet
    M. Schütze
    L. Singheiser
    W. J. Quadakkers
    Journal of Materials Science, 2006, 41 : 1047 - 1058
  • [36] Isothermal Oxidation Properties of YAG/8YSZ Double Ceramic Thermal Barrier Coatings
    Li Wensheng
    Zhang Yi
    An Guosheng
    Cheng Bo
    Feng Li
    Yang Lexin
    RARE METAL MATERIALS AND ENGINEERING, 2019, 48 (12) : 3961 - 3968
  • [37] Isothermal Oxidation Properties of YAG/8YSZ Double Ceramic Thermal Barrier Coatings
    Li, Wensheng
    Zhang, Yi
    An, Guosheng
    Cheng, Bo
    Feng, Li
    Yang, Lexin
    Xiyou Jinshu Cailiao Yu Gongcheng/Rare Metal Materials and Engineering, 2019, 48 (12): : 3961 - 3968
  • [38] Failure behaviors of EB-PVD thermal barrier coatings under isothermal oxidation and thermal cycling conditions
    Xiong, Kun
    Wang, Jierui
    Jin, Xiaochao
    Hou, Cheng
    Zhang, Wei
    Hua, Tao
    Fan, Xueling
    SURFACE & COATINGS TECHNOLOGY, 2024, 478
  • [39] Fundamental coating development study to improve the isothermal oxidation resistance and thermal cycle durability of thermal barrier coatings
    Torigoe, Taiji
    Oguma, Hidetaka
    Okada, Ikuo
    Xu, Guochun
    Fujita, Kazuhisa
    Nakayama, Akira
    Maruyama, Toshiro
    Nishio, Kazumasa
    HIGH-TEMPERATURE OXIDATION AND CORROSION 2005, 2006, 522-523 : 247 - 253
  • [40] Thermal Barrier Coatings: Evolution and Perspectives
    Camello Limar, Carlos Roberto
    SOLDAGEM & INSPECAO, 2014, 19 (04): : 353 - 363
12345