CW/PW dual-beam YAG laser welding of steel/aluminum alloy sheets

被引：82
|
作者：
Yan, Shi [1 ]
Hong, Zhang [1 ]
Watanabe, Takehiro [2 ]
Tang Jingguo [2 ]
机构：
[1] Changchun Univ Sci & Technol, Sch Electromech Engn, Changchun 130022, Peoples R China
[2] Chiba Univ, Dept Elect & Mech Engn, Fac Engn, Chiba 2638522, Japan
来源：
OPTICS AND LASERS IN ENGINEERING | 2010年 / 48卷 / 7-8期
关键词：
Dual-beam laser welding; Steel; Aluminum alloy; Intermetallic compound; Shearing strength; STAINLESS-STEEL SHEETS; ALUMINUM; JOINTS;
D O I：
10.1016/j.optlaseng.2010.03.015
中图分类号：
O43 [光学];
学科分类号：
070207 ; 0803 ;
摘要：
The lap welding of JSC270CC steel and A6111-T4 aluminum alloys were carried out by a dual-beam YAG laser with the continuous wave (CW) and pulse wave (PW) modes. The microstructure of the welded joints were examined with SEM, EPMA while the properties were checked with microhardness tester and tensile testing machine. It was shown that the dual-beam laser welding can effectively reduce or avoid the formation of the blowholes in the welded joints. The PW laser beam penetrated the welding pool, leading to the root-shape structures with enhanced bonding strength at the weld interface. A 10 mu m intermetallic compound (IMC) layer was generated at the interface. The shearing strength of lap joint was measured to be 128 MPa. (C) 2010 Elsevier Ltd. All rights reserved.
引用
收藏
页码：732 / 736
页数：5
相关论文
共 50 条
  • [31] Welding between Aluminum Alloy and Steel Sheets by Using Transition Joints
    P. Matteis
    A. Gullino
    F. D’Aiuto
    C. M. Puro
    G. Scavino
    Journal of Materials Engineering and Performance, 2020, 29 : 4840 - 4853
  • [32] Welding between Aluminum Alloy and Steel Sheets by Using Transition Joints
    Matteis, P.
    Gullino, A.
    D'Aiuto, F.
    Puro, C. M.
    Scavino, G.
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2020, 29 (08) : 4840 - 4853
  • [33] Dual-beam laser welding of T-joint of aluminum-lithium alloy 2060-T8/2099-T83
    Yang, Wuxiong
    Zhang, Xinyi
    Xiao, Rongshi
    Zhongguo Jiguang/Chinese Journal of Lasers, 2013, 40 (07):
  • [34] Interfaces bonding mechanism in coaxial dual-beam laser welding-brazing of Ti alloy and steel joint with Mg-Gd-Y-Zr alloy filler
    Li, Nan
    Lang, Qiang
    Wang, Hongyang
    Song, Gang
    Liu, Liming
    SCRIPTA MATERIALIA, 2023, 227
  • [35] Gap bridging ability in laser beam welding of thin aluminum sheets
    Schultz, V.
    Seefeld, T.
    Vollertsen, F.
    8TH INTERNATIONAL CONFERENCE ON LASER ASSISTED NET SHAPE ENGINEERING (LANE 2014), 2014, 56 : 545 - 553
  • [36] Butt welding of thin steel sheets with 'rippled mode' Nd:YAG laser
    Minamida, Katsuhiro
    Sugihashi, Atsushi
    Takahashi, Yoshio
    Seimitsu Kogaku Kaishi/Journal of the Japan Society for Precision Engineering, 1992, 58 (07): : 1197 - 1202
  • [37] Nd:YAG Laser welding of 1420 aluminum-lithium alloy
    Xiao, Rong-Shi
    Yang, Wu-Xiong
    Chen, Kai
    Zhongguo Jiguang/Chinese Journal of Lasers, 2007, 34 (SUPPL.): : 239 - 241
  • [38] The Conductive Oxide Impact on Aluminum Alloy of YAG Pulse Laser Welding
    Hai Yang
    Zhu Jing
    2017 18TH INTERNATIONAL CONFERENCE ON ELECTRONIC PACKAGING TECHNOLOGY (ICEPT), 2017, : 1513 - 1516
  • [39] In-Process Monitoring and Adaptive Control during Pulsed YAG Laser Spot Welding of Aluminum Alloy Thin Sheets
    Kawahito, Yousuke
    Katayama, Seiji
    JOURNAL OF LASER MICRO NANOENGINEERING, 2006, 1 (01): : 33 - 38
  • [40] Welding of Alumina Using a Pulsed Dual-Beam CO2 Laser
    Harris, J.
    Akarapu, R.
    Segall, A. E.
    JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 2011, 133 (01):
12345