Fabrication of sub-micron high aspect ratio diamond structures with nanoimprint lithography

被引：9

作者：

Karlsson, M. ^{[1
]}

Vartianen, I. ^{[2
]}

Kuittinen, M. ^{[2
]}

Nikolajeff, F. ^{[1
]}

机构：

[1] Uppsala Univ, Dept Engn Sci, SE-75121 Uppsala, Sweden

[2] Univ Joensuu, Dept Phys & Math, FIN-80101 Joensuu, Finland

来源：

MICROELECTRONIC ENGINEERING | 2010年 / 87卷 / 11期

关键词：

CVD diamond; Nanoimprint lithography; Inductively coupled plasma etching; Nanostructures; INFRARED SPECTRAL REGION; PHASE MASK CORONAGRAPH; CVD DIAMOND; IMPRINT LITHOGRAPHY; SURFACES; MICROOPTICS;

D O I：

10.1016/j.mee.2009.12.085

中图分类号：

TM [电工技术]; TN [电子技术、通信技术];

学科分类号：

0808 ; 0809 ;

摘要：

Polycrystalline diamond with optical quality has been patterned using nanoimprint lithography. Nanoimprint lithography is a rather new method for fabrication of resist structures with features sizes down to at least 20 nm. The pattern used in this article is a grating with a period of 600 nm and a fill factor of 0.5. Using plasma etching the nanoimprinted grating is etched into a freestanding diamond substrate. We have accomplished the fabrication of 300 nm diamond features with a depth of about 2 mu m, which corresponds to an aspect ratio of 7. (C) 2010 Elsevier B.V. All rights reserved.

引用

页码：2077 / 2080

页数：4

共 50 条

[31] High aspect ratio sub-micron trenches on silicon-on-insulator and bulk silicon
Hermersdorf, M.
Hibert, C.
Grogg, D.
Ionescu, A. M.
MICROELECTRONIC ENGINEERING, 2011, 88 (08) : 2556 - 2558
[32] Fabrication of microsieves with sub-micron pore size by laser interference lithography
Kuiper, S
van Wolferen, H
van Rijn, C
Nijdam, W
Krijnen, G
Elwenspoek, M
JOURNAL OF MICROMECHANICS AND MICROENGINEERING, 2001, 11 (01) : 33 - 37
[33] SCANNING ION-BEAM LITHOGRAPHY FOR SUB-MICRON STRUCTURE FABRICATION
CLEAVER, JRA
HEARD, PJ
AHMED, H
PROCEEDINGS OF THE SOCIETY OF PHOTO-OPTICAL INSTRUMENTATION ENGINEERS, 1983, 393 : 129 - 136
[34] Fluorocarbon film-assisted fabrication of a CoNi mold with high aspect ratio for nanoimprint lithography
Muhammad, Rizwan
Cho, Si-Hyeong
Lee, Jung-Hwan
Park, Jin-Goo
MICROELECTRONIC ENGINEERING, 2013, 104 : 58 - 63
[35] REDUCTION LENSES FOR SUB-MICRON LITHOGRAPHY
OMATA, T
SOLID STATE TECHNOLOGY, 1984, 27 (09) : 173 - 177
[36] Fabrication, microstructure, and mechanical properties of high strength cobalt sub-micron structures
Jin, Sumin
Burek, Michael J.
Evans, Robert D.
Jahed, Zeinab
Leung, Michael C.
Evans, Neal D.
Tsui, Ting Y.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2012, 552 : 104 - 111
[37] LITHOGRAPHY FOR A SUB-MICRON CMOS PROCESS
POPPERT, P
NOVAK, S
WRIGHT, P
PROCEEDINGS OF THE SOCIETY OF PHOTO-OPTICAL INSTRUMENTATION ENGINEERS, 1985, 538 : 46 - 50
[38] SUB-MICRON IDT FABRICATION
VANDENBERG, HAM
HUMPHRYES, RF
RUIGROK, JJM
VENEMA, A
IEEE TRANSACTIONS ON SONICS AND ULTRASONICS, 1978, 25 (04): : 232 - 232
[39] The sub-micron fabrication technology
Liu, M
Chen, BQ
Ye, TC
Qian, H
Xu, QX
SOLID-STATE AND INTEGRATED-CIRCUIT TECHNOLOGY, VOLS 1 AND 2, PROCEEDINGS, 2001, : 452 - 455
[40] Fabrication of a high-aspect-ratio sub-micron tool using a cathode coated with stretched-out insulating layers
Zeng, Yongbin
Wang, Yufeng
Qu, Ningsong
Zhu, Di
REVIEW OF SCIENTIFIC INSTRUMENTS, 2013, 84 (09):

← 1 2 3 4 5 →