Modelling Chi-Phase Precipitation in High Molybdenum Stainless Steels

被引：4

作者：

Xu, W. ^{[1
]}

Martin, D. San ^{[2
]}

del Castillo, P. E. J. Rivera Diaz ^{[2
]}

van der Zwaag, S. ^{[2
]}

机构：

[1] Netherlands Inst Met Res, Mekelweg 2, NL-2628 CD Delft, Netherlands

[2] Delft Univ Technol, Fac Aerosp Engn, Fundamentals Adv Mat Grp, NL-2629 HS Delft, Netherlands

来源：

THERMEC 2006 SUPPLEMENT: 5TH INTERNATIONAL CONFERENCE ON PROCESSING AND MANUFACTURING OF ADVANCED MATERIALS | 2007年 / 15-17卷

关键词：

Stainless steel; Modelling; Precipitation; Chi-phase;

D O I：

10.4028/www.scientific.net/AMR.15-17.531

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

High molybdenum high strength stainless steels can contain the so-called Chi phase (Fe36Cr12Mo10). The presence of this phase, which normally occurs at grain boundaries, depletes the chromium content leading to intergranular corrosion. This may cause alloy embrittlement during long term use. The presence of such phase has proven to be highly sensitive to alloy processing parameters such as the cooling rate after a final heat treatment. The present work provides a model to quantify the effects of processing parameters aimed at controlling the Chi phase. The model is based on nucleation and growth classical theories involving capillarity effects for the early stages; it is applied to a range of heat treatment conditions and compared to experimental results.

引用

页码：531 / 536

页数：6

共 50 条

[41] Impact of Tungsten on Thermomechanically Induced Precipitation of Laves Phase in High Performance Ferritic (HiperFer) Stainless Steels
Poepperlova, Jana
Fan, Xiuru
Kuhn, Bernd
Bleck, Wolfgang
Krupp, Ulrich
APPLIED SCIENCES-BASEL, 2020, 10 (13):
[42] PHASE-DIAGRAMS AND SIGMA-PHASE PRECIPITATION IN SOME STAINLESS-STEELS
PAN, Y
QIU, CA
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 1995, 5 (02) : 76 - &
[43] NEWER PRECIPITATION HARDENING STAINLESS STEELS
MARSHALL, MW
METALS ENGINEERING QUARTERLY, 1965, 5 (02): : 45 - &
[44] PRECIPITATION-HARDENING STAINLESS STEELS
WHITE, KL
MACHINE DESIGN, 1969, 41 (02) : 142 - &
[45] PRECIPITATION HARDENING STAINLESS-STEELS
DIEBOLD, A
SCHEIDL, H
WIRE, 1974, 24 (02): : 54 - 61
[46] PRECIPITATION OF GAMMA' IN AUSTENITIC STAINLESS STEELS
RAYNOR, D
SILCOCK, JM
SCRIPTA METALLURGICA, 1968, 2 (07): : 399 - &
[47] Initial stages of discontinuous precipitation in high nitrogen austenitic stainless steels
Srinivas, NCS
Pendase, R
Gouthama
Sastry, GVS
Kutumbarao, VV
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2002, 55 (04): : 247 - 253
[48] Identification of sigma and chi phases in duplex stainless steels
Llorca-Isern, Nuria
Lopez-Luque, Hector
Lopez-Jimenez, Isabel
Victoria Biezma, Maria
MATERIALS CHARACTERIZATION, 2016, 112 : 20 - 29
[49] STRESS CORROSION PROPERTIES OF HIGH STRENGTH PRECIPITATION HARDENING STAINLESS STEELS
CARTER, CS
FARWICK, DG
ROSS, AM
UCHIDA, JM
CORROSION, 1971, 27 (05) : 190 - &
[50] A Semiempirical Model for Sigma-Phase Precipitation in Duplex and Superduplex Stainless Steels
Ferro, P.
Bonollo, F.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2012, 43A (04): : 1109 - 1116

← 1 2 3 4 5 →