Determination of fracture toughness of 15Kh2NMFA vessel steel by kinetic indentation

被引：2
|
作者：
Bakirov, M. B. [1 ]
Morozov, E. M. [1 ]
Belunik, I. A. [1 ]
Krutko, E. S. [1 ]
机构：
[1] Engn Co Ctr Mat Sci & Lifetime, Ul Kirova 7, Lubercy 140005, Moscow Oblast, Russia
来源：
INORGANIC MATERIALS | 2015年 / 51卷 / 15期
关键词：
kinetic indentation; fracture toughness; metal aging; specimen free testing of mechanical properties; MODEL;
D O I：
10.1134/S0020168515150030
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
A specimen free technique based on kinetic indentation for determination of the fracture toughness of materials is proposed. It is based on the iteration calculation of the specific indentation work which is taken to be equal to the fracture toughness of a material controlled at a defined indentation depth. This technique makes it possible to estimate the degree of embrittlement of materials of long-operating constructions by means of periodic natural nondestructive testing. Examples of the utilization of the technique for steels of nuclear reactor vessels are presented.
引用
收藏
页码：1468 / 1473
页数：6
相关论文
共 50 条
  • [21] CONTRIBUTION OF GRAIN BOUNDARY FRACTURE INTO VARIATION OF THE CRITICAL BRITTLE POINT OF STEEL 15Kh2NMFA AND ITS WELDS
    Chernobaeva, A. A.
    Nikolaev, Yu. A.
    Nikulin, S. A.
    Turilina, V. Yu.
    Skorodumov, S. V.
    Salikhov, T. Sh.
    Li, E. V.
    Arsenkin, A. M.
    METAL SCIENCE AND HEAT TREATMENT, 2011, 53 (7-8) : 379 - 386
  • [22] INFLUENCE OF TEMPERATURE AND LOAD ASYMMETRY ON THE CYCLIC CRACK RESISTANCE OF 15KH2NMFA STEEL
    TROSHCHENKO, VT
    YASNII, PV
    POKROVSKII, VV
    POPOV, AA
    STRENGTH OF MATERIALS, 1981, 13 (10) : 1195 - 1199
  • [23] Calibration of three-parameter Weibull stress model for 15Kh2NMFA RPV steel
    Beleznai, Robert
    Lenkey, Gyoengyver B.
    Lauerova, Dana
    JOURNAL OF NUCLEAR MATERIALS, 2010, 406 (01) : 119 - 126
  • [24] High-Rate Deformation and Fracture of 15Kh2NMFA Steel under Impact Loading at Normal and Elevated Temperatures
    Kanel, G. I.
    Garkushin, G. V.
    Savinykh, A. S.
    Razorenov, S. V.
    Atroshenko, S. A.
    TECHNICAL PHYSICS, 2020, 65 (03) : 420 - 427
  • [25] Influence of Technological and Operational Factors on Fatigue Strength of 15Kh2MFA and 15Kh2NMFA Steel Grades.
    Gorynin, I.V.
    Ignatov, V.A.
    Timofeev, B.I.
    Fedorova, V.A.
    Problemy Prochnosti, 1984, (09):
  • [26] INSPECTION OF THE STRUCTURAL STATE OF IRRADIATED HULL STEEL 15KH2NMFA BY MAGNETIC METHODS
    GORKUNOV, ES
    NICHIPURUK, AP
    SOMOVA, VM
    LEVIT, VI
    RUSSIAN JOURNAL OF NONDESTRUCTIVE TESTING, 1993, 29 (07) : 535 - 539
  • [27] INFLUENCE OF THE FINAL TEMPERATURE OF COOLING IN NORMALIZATION ON THE STRUCTURE AND PROPERTIES OF 15Kh2NMFA STEEL.
    Astaf'ev, A.A.
    Markov, S.I.
    Kark, G.S.
    Soviet energy technology, 1986, (12): : 37 - 40
  • [28] Studies of Regularities in Cyclic Creep of 15Kh2NMFA Steel in a Complex State of Stress.
    Giginyak, F.F.
    Storchak, M.V.
    Mozharovskaya, T.N.
    Problemy Prochnosti, 1983, (10):
  • [29] High-Rate Deformation and Fracture of 15Kh2NMFA Steel under Impact Loading at Normal and Elevated Temperatures
    G. I. Kanel
    G. V. Garkushin
    A. S. Savinykh
    S. V. Razorenov
    S. A. Atroshenko
    Technical Physics, 2020, 65 : 420 - 427
  • [30] EXPERIMENTAL EVALUATION OF THE EFFECT OF HIGH-TEMPERATURE ON THE DEFORMATION AND FRACTURE OF STEEL 15KH2NMFA IN LOW-CYCLE TENSION
    IVAKHNENKO, VV
    SINYAVSKII, DP
    STRENGTH OF MATERIALS, 1981, 13 (08) : 950 - 953
12345