Detailed dynamic modeling of common rail piezo injector

被引：14

作者：

Pogulyaev, Y. D. ^{[1
]}

Baitimerov, R. M. ^{[1
]}

Rozhdestvenskii, Y. V. ^{[1
]}

机构：

[1] South Ural State Univ, 76 Lenina Ave, Chelyabinsk 454080, Russia

来源：

INTERNATIONAL CONFERENCE ON INDUSTRIAL ENGINEERING (ICIE-2015) | 2015年 / 129卷

关键词：

Fuel injection system; Common rail; Piezo injector; Mathematical model;

D O I：

10.1016/j.proeng.2015.12.014

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

A mathematical model of Bosch 3rd generation Common Rail fuel injection system with piezoelectric injector has been created. The numerical calculations for third different accumulator pressures (30, 80 and 160 MPa) and third energizing times ET (0.5, 1 and 2 ms) have been carried out. The results of calculations of total injected mass per cycle have been compared with the experiment with good agreement. The maximum error for ET-0.5 ms is 10.4% and for ET >= 1 ms is less than 5 %. (C) 2015 The Authors. Published by Elsevier Ltd.

引用

页码：93 / 98

页数：6

共 50 条

[21] An experimental study on the driver circuit of common-rail injector
Li, K., 1600, SAE-China (35):
[22] Experimental Research on Submerged Fuel Jet in Common Rail Injector
Qiu, Tao
Wu, Cheng-Lin
Lei, Yan
Chen, Xin-Yu
Guo, Peng
Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics, 2019, 40 (07): : 1674 - 1679
[23] A Study on Solenoid Injector Characteristics in a Common Rail Diesel Engine
Lee, KeunSang
Cho, HaengMuk
INTERNATIONAL JOURNAL OF MECHANICAL ENGINEERING AND ROBOTICS RESEARCH, 2022, 11 (11): : 865 - 869
[24] Comparing the performance of a CI engine after replacing the mechanical injector with a common rail solenoid injector
Ghaedi, Ashkan
Shafaghat, Rouzbeh
Jahanian, Omid
Motallebi Hasankola, Seyed Sadegh
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY, 2020, 139 (04) : 2475 - 2485
[25] Study on Dynamic Injection Prediction Model of High-Pressure Common Rail Injector under Thermal Effect
Liu, Zhenming
Li, Ziming
Wu, Jiechang
Liu, Jingbin
Chen, Ping
ENERGIES, 2022, 15 (14)
[26] Simulation study on the cavitation distribution in the ball valve of a common rail injector
Zhao, Jianhui
Chen, Shuo
Yang, Guichun
Zhang, Heng
INTERNATIONAL JOURNAL OF ENGINE RESEARCH, 2024, 25 (08) : 1575 - 1587
[27] Theoretical and experimental study of response time on common-rail injector
Xu, Hong-Jun
Ouyang, Guang-Yao
Neiranji Gongcheng/Chinese Internal Combustion Engine Engineering, 2005, 26 (06): : 9 - 12
[28] The simulation and optimization of injector about common rail fuel injection system
An, SJ
Ouyang, GY
Li, YX
Liu, Z
SYSTEM SIMULATION AND SCIENTIFIC COMPUTING (SHANGHAI), VOLS I AND II, 2002, : 948 - 951
[29] Study of the influence of Structural parameters of Common Rail Injector on the Ejecting Performance
Yan, Hu
PROCEEDINGS OF THE 2014 CONFERENCE ON INFORMATISATION IN EDUCATION, MANAGEMENT AND BUSINESS, 2014, : 4 - 7
[30] Simulation of Assembly Tolerance and Characteristics of High Pressure Common Rail Injector
Lu, Jiping
Tang, Shuiyuan
Zhou, Yong
Hong, Jing
Jian, Zhonghua
INTERNATIONAL JOURNAL OF COMPUTATIONAL INTELLIGENCE SYSTEMS, 2011, 4 (06) : 1282 - 1289

← 1 2 3 4 5 →