Precipitation on grain boundaries in Al-Mg-Si alloys: The role of grain boundary misorientation

被引：17
|
作者：
Zhang, Zhijun [1 ]
Parson, N. C. [2 ]
Poole, W. J. [1 ]
机构：
[1] Univ British Columbia, Dept Mat Engn, 309-6350 Stores Rd, Vancouver, BC V6T 1Z4, Canada
[2] Rio Tinto Aluminium, Saguenay, PQ, Canada
来源：
SCRIPTA MATERIALIA | 2022年 / 211卷
基金：
加拿大自然科学与工程研究理事会;
关键词：
Al-Mg-Si alloys; Precipitation; Grain boundaries; Cooling rate; ALUMINUM; SEGREGATION; NUCLEATION;
D O I：
10.1016/j.scriptamat.2021.114494
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The application of Al-Mg-Si alloys is growing in fracture critical applications such as transportation. The formation of grain boundary precipitates during cooling after solution treatment is an important factor in controlling low energy intergranular fracture modes. A systematic study was conducted on the effects of grain boundary misorientation and cooling rate (between 3 and 1000 degrees C/s) on the size and density of grain boundary precipitates before and after artificial ageing. It was found that precipitates on high angle grain boundaries were approximate to 3 times larger than those formed on low angle boundaries. The grain boundary precipitate size decreased by a factor of 3 when the cooling rate increased from 3 to 80 degrees C/s with no precipitates observed at 1000 degrees C/s. However, even for a cooling rate of 1000 degrees C/s, grain boundary precipitation was observed during subsequent artificial ageing. The effects of grain boundary misorientation and cooling rate were rationalized by enhanced diffusion at grain boundaries. (c) 2021 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
引用
收藏
页数：6
相关论文
共 50 条
  • [41] RELATION BETWEEN FABRICATION PARAMETERS AND GRAIN-BOUNDARY INTERNAL-FRICTION PEAKS IN COMMERCIAL AL-MG-SI ALLOYS
    MORELLI, EC
    GHILARDUCCI, AA
    DEPEREYRA, SEU
    JOURNAL OF ALLOYS AND COMPOUNDS, 1994, 211 : 484 - 488
  • [42] The role of vacancies in the aging of Al-Mg-Si alloys
    Pogatscher, Stefan
    Werinos, Marion
    Antrekowitsch, Helmut
    Uggowitzer, Peter J.
    ALUMINIUM ALLOYS 2014 - ICAA14, 2014, 794-796 : 1008 - +
  • [43] OBSERVATIONS ON THE ROLE OF MG AND SI IN THE DIRECTED OXIDATION OF AL-MG-SI ALLOYS
    NAGELBERG, AS
    JOURNAL OF MATERIALS RESEARCH, 1992, 7 (02) : 265 - 268
  • [44] Heterogeneous precipitation behaviors of the bimodal grain structure in a die-cast Al-Mg-Si alloy
    Sun, Qicai
    Yuan, Lingyang
    Tong, Xin
    Zhou, Yunlu
    Peng, Liming
    Ding, Wenjiang
    MATERIALS TODAY COMMUNICATIONS, 2025, 44
  • [45] EFFECT OF GRAIN SIZE ON SERRATED YIELDING IN AN AL-MG-SI ALLOY
    MCCORMICK, PG
    PHILOSOPHICAL MAGAZINE, 1971, 23 (184) : 949 - +
  • [46] Precipitation behavior of Mg and Si at RT in pre-aged Al-Mg-Si alloys
    Takata, Ken
    Ushioda, Kohsaku
    Kikuchi, Masao
    ALUMINIUM ALLOYS 2006, PTS 1 AND 2: RESEARCH THROUGH INNOVATION AND TECHNOLOGY, 2006, 519-521 : 233 - 238
  • [47] Clustering and precipitation in Al-Mg-Si alloys during linear heating
    Zi Yang
    Igor Erdle
    Chunhui Liu
    John Banhart
    JournalofMaterialsScience&Technology, 2022, 120 (25) : 78 - 88
  • [48] Precipitation behaviour of Al-Mg-Si alloys with high silicon content
    L ZHEN
    W. D FEI
    S. B KANG
    H. W KIM
    Journal of Materials Science, 1997, 32 : 1895 - 1902
  • [49] How calcium prevents precipitation hardening in Al-Mg-Si alloys
    Wenner, Sigurd
    Marioara, Calin D.
    Andersen, Sigmund J.
    Holmestad, Randi
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2013, 575 : 241 - 247
  • [50] Evolution of the Initial Precipitation and Strengthening Mechanism of Al-Mg-Si alloys
    Zheng, Yaya
    Luo, Binghui
    Bai, Zhenhai
    He, Chuan
    JOM, 2019, 71 (12) : 4737 - 4745
12345