Study on numerical simulation and experiment of titanium alloy for high speed milling

被引：1
|
作者：
Wu Hong-bing [1 ]
Jia Zhi-xin [1 ]
Zhang Xue-chang [1 ]
Liu Gang [2 ]
机构：
[1] Zhejiang Univ, Ningbo Inst Technol, Sch Mech & Energy, Ningbo 315100, Zhejiang, Peoples R China
[2] Zhejiang Univ, Coll Mech & Energy Engn, Hangzhou 310027, Peoples R China
来源：
ICICTA: 2009 SECOND INTERNATIONAL CONFERENCE ON INTELLIGENT COMPUTATION TECHNOLOGY AND AUTOMATION, VOL II, PROCEEDINGS | 2009年
关键词：
Titanium alloy; Numerical simulation; high speed milling; finite element model; TOOLS;
D O I：
10.1109/ICICTA.2009.303
中图分类号：
TP [自动化技术、计算机技术];
学科分类号：
0812 ;
摘要：
Aim at the difficulty of cutting for titanium alloy, the 3D finite element model has been established. The high speed cutting has been simulated using the established model. The chip formation and the cutting force have been analyzed. In the same condition, the cutting experiment has been carried on. Through the comparison, the result of simulation agrees with the result of experiment well. It proves that the finite element model is correct, and the finite model can be used to investigate the optimization of cutting parameters.
引用
收藏
页码：271 / +
页数：3
相关论文
共 50 条
  • [31] Compound machining of titanium alloy by super high speed EDM milling and arc machining
    Wang, Fei
    Liu, Yonghong
    Zhang, Yanzhen
    Tang, Zemin
    Ji, Renjie
    Zheng, Chao
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2014, 214 (03) : 531 - 538
  • [32] The Research on Tool Wear of High Speed Milling Titanium Alloy TC4
    Shi, Hongliang
    Wang, Zhichao
    Ren, Huanhuan
    Yuan, Haoteng
    SEVENTH INTERNATIONAL CONFERENCE ON ELECTRONICS AND INFORMATION ENGINEERING, 2017, 10322
  • [33] Cost-effective milling of titanium alloy: High-speed or conventional technique?
    Sage, C
    HIGH-PERFORANCE TOOLS, 1998, 1399 : 451 - 464
  • [34] Formation Mechanism and Morphology Observation of Chips in High-Speed Milling of Titanium Alloy
    Tong, Hao
    Liu, Changfu
    Gao, Jingjing
    Liu, Jing
    JOURNAL OF ADVANCED MANUFACTURING SYSTEMS, 2024, 23 (03) : 549 - 575
  • [35] Tool wear and surface integrity in high speed milling of a near alpha titanium alloy
    Zhang, Yiping
    Xu, Jiuhua
    Geng, Guosheng
    ADVANCES IN MATERIALS MANUFACTURING SCIENCE AND TECHNOLOGY II, 2006, 532-533 : 644 - +
  • [36] Investigation of chip formation mechanism and surface integrity in high speed milling titanium alloy
    Chen, M
    Liu, GL
    Sun, FH
    Jian, XG
    Yuan, RW
    ENGINEERING PLASTICITY FROM MACROSCALE TO NANOSCALE PTS 1 AND 2, 2003, 233-2 : 489 - 495
  • [37] Study on surface morphology and microstructure of titanium alloy TC4 under high-speed milling
    Key Laboratory of Contemporary Design and Integrated Manufacturing Technology, Northwestern Polytechnical University, Xi'an 710072, China
    Hangkong Xuebao, 2008, 6 (1710-1715):
  • [38] Numerical Simulation of High Speed Incremental Forming of Aluminum Alloy
    Giuseppina, Ambrogio
    Teres, Citrea
    Luigino, Filice
    Francesco, Gagliardi
    NUMISHEET 2014: THE 9TH INTERNATIONAL CONFERENCE AND WORKSHOP ON NUMERICAL SIMULATION OF 3D SHEET METAL FORMING PROCESSES: PART A BENCHMARK PROBLEMS AND RESULTS AND PART B GENERAL PAPERS, 2013, 1567 : 820 - 823
  • [39] Numerical Simulation of High Speed Machining of Alloy Cast Iron
    Tan, Yang
    Chi, Yilin
    Huang, Yayu
    Yao, Tingqiang
    AUTOMATION EQUIPMENT AND SYSTEMS, PTS 1-4, 2012, 468-471 : 2310 - 2314
  • [40] Simulation Analysis and Experimental Study on SLM Forming Titanium Alloy Milling Hole
    Shi, Wentian
    Yan, Tianming
    Liu, Yude
    Zhang, Xiaoqing
    Li, Jihang
    Wang, Lin
    Dong, Lu
    METALS, 2022, 12 (11)
12345