Porous amorphous fluoropolymer films with ultralow dielectric constant

With the development of ultralarge scale integrated circuit, new interlayer dielectrics with low dielectric constant for multilevel interconnections are required, instead of conventional SiO2 films. For the sake of seeking perfect dielectrics, amorphous fluoropolymer (AF) thin him with a thickness of about 0.9 mu m has been prepared by spin-coating method, following the principle of phase separation. By capacitance-voltage (C-V) measurements the dielectric constant of the thin film is equal to 1.57 at 1 MHz, which is attributed to numerous pores contained in the film matrix. X-ray photoelectron spectroscopy (XPS) spectra show that after annealing, about 71% CF3 groups in the AF film have decomposed into CF2, CF, etc. This leads to the increase of CF2 groups by three times and CF groups by 8% in the AF film. In a word, compared with the film without being annealed, about 25% carbon, 7% fluorine and 12% oxygen atoms will be lost after annealing at 400 degrees C for 30min.