Tool design and cutting parameters optimisation for plunge milling blisk

被引：6
|
作者：
Cheng, Yaonan [1 ]
Yang, Jinlong [1 ]
Zuo, Diange [1 ]
Song, Xu [1 ]
Feng, Xinmin [1 ]
机构：
[1] Harbin Univ Sci & Technol, Key Lab Natl & Local United Engn High Efficiency, 52 Xuefu Rd, Harbin, Peoples R China
来源：
INTERNATIONAL JOURNAL OF MANUFACTURING RESEARCH | 2020年 / 15卷 / 03期
基金：
中国国家自然科学基金;
关键词：
blisk; difficult-to-machine material; plunge milling tool; cutting parameters;
D O I：
10.1504/IJMR.2020.108192
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Because of its complex structure, narrow channel, large metal removal rate and its material belonging to difficult-to-machine material, the machining of blisk is very difficult. It is one of the effective methods to solve the above problems by applying the plunge milling technology, and the tool design and cutting parameters optimisation are of great significance. Firstly, the finite element method is used to design and analyse the geometrical structure, and the static and modal analysis is carried out to ensure the strength of the tool and the stability of the plunge milling. Secondly, the experimental research on the milling titanium alloy was finished by using the designed tool, and the influence of cutting parameters on the cutting force was analysed. Finally, based on the fuzzy comprehensive evaluation method, the cutting parameters are optimised, and the rationality of the tool designed is verified through the experimental study of tool wear. [Submitted 3 January 2018; Accepted 28 December 2018]
引用
收藏
页码：266 / 284
页数：19
相关论文
共 50 条
  • [21] Research on tool path planning method of four-axis high-efficiency slot plunge milling for open blisk
    Ren, J. X.
    Yao, C. F.
    Zhang, D. H.
    Xue, Y. L.
    Liang, Y. S.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2009, 45 (1-2): : 101 - 109
  • [22] Cutting Force Prediction of Plunge Milling Based on Precise Cutting Geometry
    Zhuang, Kejia
    Zhang, Xiaoming
    Ding, Han
    INTELLIGENT ROBOTICS AND APPLICATIONS, PT II, 2013, 8103 : 592 - 601
  • [23] Compound efficient and powerful milling machine tool of blisk
    Xin, Hongmin
    Shi, Yaoyao
    Zhao, Tao
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2018, 98 (5-8): : 1745 - 1753
  • [24] Compound efficient and powerful milling machine tool of blisk
    Hongmin Xin
    Yaoyao Shi
    Tao Zhao
    The International Journal of Advanced Manufacturing Technology, 2018, 98 : 1745 - 1753
  • [25] Development of rough cutting method with plunge milling using 5-axis control machine tool
    Seimitsu Kogaku Kaishi, 2007, 11 (1261-1266):
  • [26] Optimisation of cutting tool and cutting parameters in machining of molybdenum alloys through the Taguchi Method
    Ciftci, Ibrahim
    Gokce, Huseyin
    JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY, 2019, 34 (01): : 201 - 213
  • [27] Mathematical Model and Simulation of Cutting Force in Plunge Milling Process
    秦旭达
    赵剑波
    刘焕领
    张剑刚
    赵伟
    田颖
    TOM O Muller
    NI Wangyang
    LIU Yixiong
    Transactions of Tianjin University, 2007, (04) : 303 - 307
  • [28] Mathematical model and simulation of cutting force in plunge milling process
    Qin, Xuda
    Zhao, Jianbo
    Liu, Huanling
    Zhang, Jiangang
    Zhao, Wei
    Tian, Ying
    Tom, O Muller
    Ni, Wangyang
    Liu, Yixiong
    Transactions of Tianjin University, 2007, 13 (04) : 303 - 307
  • [29] DESIGN OF MILLING TOOL CUTTING STRATEGY FOR CNC MANUFACTURING OPERATIONS
    Novak-Marcincin, Jozef
    ENGINEERING REVIEW, 2008, 28 (01) : 93 - 97
  • [30] Tool Wear in Disc Milling Grooving of Aircraft Engine Blisk
    Hongmin Xin
    Yaoyao Shi
    Huawei Wu
    Tao Zhao
    Feng Yang
    Lin Wang
    Iranian Journal of Science and Technology, Transactions of Mechanical Engineering, 2021, 45 : 555 - 566
12345