Effect of Longitudinal Steel Ratio on Behavior of RC Beams Strengthened with FRP Composites: Experimental and FE Study

This study experimentally and numerically investigates the effect of longitudinal steel ratio on the flexural performance of RC beams externally strengthened with fiber-reinforced polymer (FRP) composites. The experimental program consisted of testing 11 beams under four-point bending until failure. Each beam was duplicated to verify the repeatability of the results. Three beams were tested as control specimens; the remaining eight beams were externally strengthened in flexure with FRP composites. The primary experimentally studied parameters were longitudinal steel ratio and axial FRP stiffness. Three different steel ratios were examined. For the lowest steel ratio, four different FRP systems with six axial stiffness values were investigated. However, for the other two steel ratios, only one FRP system was studied. In addition to the experimental program, a numerical study utilizing nonlinear finite-element (FE) analysis was conducted. As a result of the numerical study, new FRP stiffness and reinforcement parameters were introduced in this research. These parameters were used in the categorization of failure modes of FRP-upgraded beams. (C) 2014 American Society of Civil Engineers.