Fatigue behaviour assessment of flax-epoxy composites

被引:88
|
作者
Bensadoun, F. [1 ]
Vallons, K. A. M. [1 ]
Lessard, L. B. [2 ]
Verpoest, I. [1 ]
Van Vuure, A. W. [1 ]
机构
[1] Katholieke Univ Leuven, Dept Mat Engn, Kasteelpk Arenberg 44 Bus 2450, B-3001 Heverlee, Belgium
[2] McGill Univ, Dept Mech Engn, 817 Sherbrooke St West, Montreal, PQ H3A0C3, Canada
关键词
Fabrics/textiles; Biocomposites; Fatigue; Mechanical properties; FIBER-REINFORCED COMPOSITES; MECHANICAL-PROPERTIES; LIFE DIAGRAMS; DAMAGE; TENSILE; HYSTERESIS; FLAX/EPOXY; STIFFNESS;
D O I
10.1016/j.compositesa.2015.11.003
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The present study focuses on the characterisation and evaluation of the fatigue behaviour of flax epoxy composites. A better understanding of this behaviour allows the prediction of long-term properties to assess the viability and long-term durability of these materials. The purpose of this work is to systematically compare the tension tension fatigue behaviour of flax fibre composites for one random mat, six textile architectures and two laminate configurations, which are used in a wide range of applications. The fibre architecture was found to have a strong effect on the fatigue behaviour, where higher static strength and modulus combinations present the best fatigue characteristics. They have a delayed damage initiation and increased fatigue life as well as a reduced damage propagation rate combined with higher energy dissipation in the early stages of fatigue loading. (C) 2015 Elsevier Ltd. All rights reserved.
引用
收藏
页码:253 / 266
页数:14
相关论文
共 50 条
  • [41] Hygro-mechanical coupling and multiscale swelling coefficients assessment of flax yarns and flax/epoxy composites
    Abida, Marwa
    Gehring, Florian
    Mars, Jamel
    Vivet, Alexandre
    Dammak, Fakhreddine
    Haddar, Mohamed
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2020, 136
  • [42] Hygro-mechanical coupling and multiscale swelling coefficients assessment of flax yarns and flax / epoxy composites
    Abida, Marwa
    Gehring, Florian
    Mars, Jamel
    Vivet, Alexandre
    Dammak, Fakhreddine
    Haddar, Mohamed
    Composites Part A: Applied Science and Manufacturing, 2020, 136
  • [43] Mechanical, DMA and Sound Acoustic behaviour of Flax woven fabric reinforced Epoxy composites
    Vinu Kumar, S. M.
    Senthil Kumar, K. L.
    Siddhi Jailani, H.
    Rajamurugan, G.
    MATERIALS RESEARCH EXPRESS, 2020, 7 (08)
  • [44] Ageing of autoclaved epoxy/flax composites: Effects on water absorption, porosity and flexural behaviour
    dos Santos, Julio Cesar
    de Oliveira, Livia Avila
    Panzera, Tulio Hallak
    Remillat, Chrystel D. L.
    Farrow, Ian
    Placet, Vincent
    Scarpa, Fabrizio
    COMPOSITES PART B-ENGINEERING, 2020, 202
  • [45] Fuzzy logic response to Young's modulus characterization of a flax-epoxy natural fiber composite
    Sodoke, Kossi Fabrice
    Laperriere, Luc
    Toubal, Lotfi
    Khakestar, Reza Soufian
    MATERIALS & DESIGN, 2016, 89 : 273 - 285
  • [46] Fatigue Behaviour and Life Assessment of Jute-epoxy Composites under Tension-Tension Loading
    Padmaraj, N. H.
    Chethan, K. N.
    Pavan
    Anand, Onkar
    INTERNATIONAL CONFERENCE ON MATERIALS, ALLOYS AND EXPERIMENTAL MECHANICS (ICMAEM-2017), 2017, 225
  • [47] Assessment of 3D moisture diffusion parameters on flax/epoxy composites
    Saidane, El Hadi
    Scida, Daniel
    Assarar, Mustapha
    Ayad, Rezak
    COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2016, 80 : 53 - 60
  • [48] Fatigue behaviour of Kevlar composites with nanoclay-filled epoxy resin
    Ferreira, J. A. M.
    Reis, P. N. B.
    Costa, J. D. M.
    Richardson, M. O. W.
    JOURNAL OF COMPOSITE MATERIALS, 2013, 47 (15) : 1885 - 1895
  • [49] Fatigue behaviour of glass fibre reinforced epoxy composites enhanced with nanoparticles
    Borrego, L. P.
    Costa, J. D. M.
    Ferreira, J. A. M.
    Silva, H.
    COMPOSITES PART B-ENGINEERING, 2014, 62 : 65 - 72
  • [50] Impact behaviour of flax/epoxy composite plates
    Liang, Shaoxiong
    Guillaumat, Laurent
    Gning, Papa-Birame
    INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 2015, 80 : 56 - 64