Monitoring and Analysis of the Process of Conductive Heating Turning

被引：0
|
作者：
Shen, Tenghui [1 ]
Wang, Xi [1 ]
Zhang, Tianyu [1 ]
机构：
[1] Xiamen Univ, Coll Phys & Mech & Elect Mfg Engn, Xiamen, Fujian, Peoples R China
来源：
APPLIED MECHANICS, MATERIALS AND MANUFACTURING IV | 2014年 / 670-671卷
关键词：
conductive heating turning; High manganese steel; vibration signal; wavelet analysis;
D O I：
10.4028/www.scientific.net/AMM.670-671.529
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
This paper introduces conductive heat turning method using the high manganese steel as experimental materials. An experimental platform has been established, and vibration signal collected through continuous wavelet transform. By comparing and analyzing different processing parameters and working conditions, the effectiveness of conductive heating turning method's reducing the vibration in the process of turning the size has been proved.
引用
收藏
页码：529 / 534
页数：6
相关论文
共 50 条
  • [11] In-Process Monitoring and Prediction of Surface Roughness on CNC Turning by using Response Surface Analysis
    Somkiat, T.
    Somchart, A.
    Sirichan, T.
    PROCEEDINGS OF THE 36TH INTERNATIONAL MATADOR CONFERENCE, 2010, : 213 - 216
  • [12] TURNING ON DIRECT HEATING
    不详
    ELECTRICAL REVIEW, 1972, 191 (08): : 248 - &
  • [13] INFLUENCE OF ADJACENT CONDUCTIVE FORMATIONS ON THE SELECTIVE ELECTRIC RESERVOIR HEATING PROCESS
    HARVEY, AH
    SOCIETY OF PETROLEUM ENGINEERS JOURNAL, 1982, 22 (05): : 750 - 754
  • [14] The monitoring of flank wear on the CBN tool in the hard turning process
    J. M. Zhou
    M. Andersson
    J. E. Stahl
    The International Journal of Advanced Manufacturing Technology, 2003, 22 : 697 - 702
  • [15] The monitoring of flank wear on the CBN tool in the hard turning process
    Zhou, JM
    Andersson, M
    Stahl, JE
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2003, 22 (9-10): : 697 - 702
  • [16] Development of intelligent monitoring and optimization of cutting process for CNC turning
    Moriwaki, T
    Tangjitsitcharoen, S
    Shibasaka, T
    INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING, 2006, 19 (05) : 473 - 480
  • [17] An investigation of the cutting process for chip breaking monitoring in turning of steels
    Grzesik, W
    Bernat, P
    JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 1998, 120 (03): : 555 - 562
  • [18] Monitoring and adaptive process control of wire electrical discharge turning
    1600, Fuji Technology Press (08):
  • [19] Monitoring the tool wear in the turning process using acoustic emission
    Diniz, Anselmo Eduardo
    Pigari, Almir
    1996, Braz Soc Mech Sci, Rio de Janeiro, Brazil (18):
  • [20] Feeling Machine for Process Monitoring of Turning Hybrid Solid Components
    Denkena, Berend
    Bergmann, Benjamin
    Witt, Matthias
    METALS, 2020, 10 (07) : 1 - 12
12345