Monitoring and Analysis of the Process of Conductive Heating Turning

被引：0
|
作者：
Shen, Tenghui [1 ]
Wang, Xi [1 ]
Zhang, Tianyu [1 ]
机构：
[1] Xiamen Univ, Coll Phys & Mech & Elect Mfg Engn, Xiamen, Fujian, Peoples R China
来源：
APPLIED MECHANICS, MATERIALS AND MANUFACTURING IV | 2014年 / 670-671卷
关键词：
conductive heating turning; High manganese steel; vibration signal; wavelet analysis;
D O I：
10.4028/www.scientific.net/AMM.670-671.529
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
This paper introduces conductive heat turning method using the high manganese steel as experimental materials. An experimental platform has been established, and vibration signal collected through continuous wavelet transform. By comparing and analyzing different processing parameters and working conditions, the effectiveness of conductive heating turning method's reducing the vibration in the process of turning the size has been proved.
引用
收藏
页码：529 / 534
页数：6
相关论文
共 50 条
  • [1] Analysis of metallised propellant ignition process under conductive heating
    Bhaskaran, KA
    Rao, KN
    Umashankar, PB
    Suresh, V
    DEFENCE SCIENCE JOURNAL, 1998, 48 (03) : 287 - 296
  • [2] Monitoring of Surface Roughness in Aluminium Turning Process
    Chaijareenont, Atitaya
    Tangjitsitcharoen, Somkiat
    2017 THE 2ND INTERNATIONAL CONFERENCE ON FUNCTIONAL MATERIALS AND METALLURGY (ICFMM 2017), 2018, 303
  • [3] Tool wear monitoring during the turning process
    Kopac, J
    Sali, S
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2001, 113 (1-3) : 312 - 316
  • [4] Performance optimisation of the turning process along with multi-surface heating process
    Kumar, D. Sathish
    Thanigaivelan, R.
    Natarajan, N.
    MATERIALS SCIENCE-POLAND, 2022, 40 (04) : 1 - 13
  • [5] Vibratory analysis of turning process
    Serra, Roger
    ADVANCES IN EXPERIMENTAL MECHANICS VIII, 2011, 70 : 333 - 338
  • [6] Investigation on Uniformity of Temperature Distribution of Blanks in the Process of Conductive Heating
    Tao, W. J.
    Liang, W. K.
    Xiao, W.
    Zhang, Y. S.
    ADVANCED HIGH STRENGTH STEEL AND PRESS HARDENING, 2017, : 400 - 405
  • [7] In-Process Monitoring and Prediction of Surface Roughness in CNC Turning Process
    Tangjitsitcharoen, Somkiat
    ADVANCES IN MECHANICAL DESIGN, PTS 1 AND 2, 2011, 199-200 : 1958 - 1966
  • [8] MONITORING OF TURNING PROCESS WITH ACOUSTIC EMISSION SIGNALS.
    Kojima, Koji
    Inasaki, Ichiro
    Miyake, Ryoichi
    Nippon Kikai Gakkai Ronbunshu, C Hen/Transactions of the Japan Society of Mechanical Engineers, Part C, 1986, 52 (474): : 799 - 805
  • [9] Analysis of the process of obsessing the turning of the vessel
    Vas'kov, Anatoliy S.
    Shtanko, Aleksandr N.
    Eskova, Anna, V
    MARINE INTELLECTUAL TECHNOLOGIES, 2022, (03): : 71 - 76
  • [10] Sequence/batch monitoring and root cause analysis Turning process data into customer benefits with MPCA
    Chioua, Moncef
    Xu, Chaojun
    Petersen, Heiko
    Schlake, Jan
    ATP EDITION, 2015, (05): : 50 - 58
12345