High strain-rate behaviour of a Tungsten alloy

被引：4

作者：

Cadoni, Ezio ^{[1
]}

Dotta, Matteo ^{[1
]}

Forni, Daniele ^{[1
]}

机构：

[1] Univ Appl Sci Southern Switzerland, DynaMat Lab, Campus SUPSI Trevano, CH-6952 Canobbio, Switzerland

来源：

1ST VIRTUAL EUROPEAN CONFERENCE ON FRACTURE - VECF1 | 2020年 / 28卷

关键词：

High strain-rate; tensile; Split Hopkinson Tensile Bar; tungsten alloy;

D O I：

10.1016/j.prostr.2020.11.070

中图分类号：

TU [建筑科学];

学科分类号：

0813 ;

摘要：

Tungsten alloys are often used in machinery and in other industrial sectors. This study presents the dynamic tensile behaviour of a commercial tungsten alloy. The tests were carried-out at high strain-rate (from 850 to 2200 s(-1)) by means of a Split Hopkinson Tension Bar device on round specimens having diameter and gauge length of 2 mm and 5 mm, respectively. The dynamic stress versus strain curves were compared with the quasi-static ones in order to investigate the rate-dependency of this alloy. High strain rate caused a growth of proof and ultimate tensile strengths as well as modulus of toughness and a decrease of the area reduction. Finally, the parameters of the Cowper-Symonds relationship were calibrated. (C) 2020 The Authors. Published by Elsevier B.V.

引用

页码：964 / 970

页数：7

共 50 条

[31] HIGH-STRAIN, HIGH STRAIN-RATE DEFORMATION OF COPPER
MEYERS, MA
MEYER, LW
VECCHIO, KS
ANDRADE, U
JOURNAL DE PHYSIQUE III, 1991, 1 (C3): : 11 - 17
[32] Effect of Strain-Rate and Temperature on Mechanical Response of Pure Tungsten
M. Scapin
L. Peroni
C. Torregrosa
A. Perillo-Marcone
M. Calviani
Journal of Dynamic Behavior of Materials, 2019, 5 : 296 - 308
[33] Strain-rate effect on consolidation behaviour of ariake clay
Department of Civil Engineering, Saga University, Japan
不详
不详
不详
Proc. Inst. Civ. Eng. Geotech. Eng., 5 (267-277):
[34] Negative strain-rate sensitivity in a nanostructured aluminum alloy
Han, Bing Q.
Huang, Jianyu
Zhu, Yuntian T.
Lavernia, Enrique J.
ADVANCED ENGINEERING MATERIALS, 2006, 8 (10) : 945 - 947
[35] Microstructural Characterization of a High-Strength Aluminum Alloy Subjected to High Strain-Rate Impact
Lee, W. M.
Zikry, M. A.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2011, 42A (05): : 1215 - 1221
[36] Plasticity-decreasing induced by high strain rate of tungsten alloy
Tang, Changguo
Chen, Wentao
Zhu, Jinhua
Hsi-An Chiao Tung Ta Hsueh/Journal of Xi'an Jiaotong University, 1997, 31 (03): : 28 - 32
[37] Microstructural Characterization of a High-Strength Aluminum Alloy Subjected to High Strain-Rate Impact
W. M. Lee
M. A. Zikry
Metallurgical and Materials Transactions A, 2011, 42 : 1215 - 1221
[38] The high strain-rate behaviour of three molecular weights of polyethylene examined with a magnesium alloy split-Hopkinson pressure bar
Hughes, F.
Prudom, A.
Swallowe, G.
POLYMER TESTING, 2013, 32 (05) : 827 - 834
[39] High strain rate compressive behaviour of aluminium alloy foams
Deshpande, VS
Fleck, NA
INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 2000, 24 (03) : 277 - 298
[40] High strain-rate compression and tension behaviour of an epoxy bi-component adhesive
Goglio, L.
Peroni, L.
Peroni, M.
Rossetto, M.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES, 2008, 28 (07) : 329 - 339

← 1 2 3 4 5 →