Influence of oil on flow condensation heat transfer of R410A inside 4.18 mm and 1.6 mm inner diameter horizontal smooth tubes

被引:74
|
作者
Huang, Xiangchao [1 ]
Ding, Guoliang [1 ]
Hu, Haitao [1 ]
Zhu, Yu [1 ]
Peng, Hao [1 ]
Gao, Yifeng [2 ]
Deng, Bin [3 ]
机构
[1] Shanghai Jiao Tong Univ, Inst Refrigerat & Cryogen, Shanghai 200240, Peoples R China
[2] Int Copper Assoc Shanghai Off, Shanghai 200020, Peoples R China
[3] Golden Dragon Precise Copper Tube Grp Inc, Inst Heat Transfer Technol, Shanghai 200135, Peoples R China
关键词
Heat exchanger; Condenser; Smooth tube; Heat transfer; Parameter; Oil; PRESSURE-DROP; TRANSFER COEFFICIENTS; MIXTURE; R134A; REFRIGERANTS; R22;
D O I
10.1016/j.ijrefrig.2009.09.008
中图分类号
O414.1 [热力学];
学科分类号
摘要
The influence of oil on condensation heat transfer of R410A inside 4.18 mm and 1.6 mm inner diameter horizontal smooth tubes is investigated experimentally. The experimental condensing temperature is 40 degrees C, and nominal oil concentration range is from 0% to 5%. The test results indicate that the presence of oil deteriorates the heat transfer, and the deterioration effect becomes obvious with the increase of oil concentration. At oil concentration of 5%, the heat transfer coefficient decreases by maximum 24.9% and 28.5% for 4.18 mm and 1.6 mm tubes, respectively. A new correlation for heat transfer coefficients of R410A-oil mixture flow condensation inside smooth tubes is proposed, which agrees with all the experimental data within a deviation of -30% similar to +20%. (c) 2009 Elsevier Ltd and IIR. All rights reserved.
引用
收藏
页码:158 / 169
页数:12
相关论文
共 50 条
  • [41] Flow boiling heat transfer and pressure drop of R245fa inside horizontal 1.62 mm and 2.43 mm tubes under hypergravity
    Li, Chong
    Fang, Xiande
    Luo, Zufen
    Dai, Qiumin
    INTERNATIONAL JOURNAL OF REFRIGERATION, 2023, 148 : 96 - 107
  • [42] Heat transfer characteristics of R410A-oil mixture flow boiling in a 7 mm horizontal straight smooth tube II. Correlations
    Inst. of Refrigeration and Cryogenics Eng., Shanghai Jiaotong Univ., Shanghai 200240, China
    不详
    Shanghai Jiaotong Daxue Xuebao, 2007, 10 (1638-1642):
  • [43] Flow condensation heat transfer coefficients of R22, R134a, R407C, and R410A inside plain and microfin tubes
    Jung, D
    Cho, Y
    Park, K
    INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID, 2004, 27 (01): : 25 - 32
  • [44] Influencing Factors on Heat Transfer Performance for Flow Boiling of R410A in Horizontal Micro-Fin Tubes
    He, H. P.
    Ma, H. G.
    Bai, J. M.
    ADVANCED MANUFACTURING TECHNOLOGY, PTS 1-4, 2012, 472-475 : 1676 - 1680
  • [45] R410A flow boiling coefficient in horizontal annular channels of enhanced tubes, Part II: Heat transfer
    Zhang, Jianghui
    Wang, Jiacheng
    He, Yan
    Liu, Li
    Li, Wei
    Tang, Weiyu
    Abbas, Ahmad
    Ayub, Zahid
    INTERNATIONAL JOURNAL OF REFRIGERATION, 2022, 137 : 43 - 50
  • [46] CONDENSATION HEAT TRANSFER AND PRESSURE DROP OF R-410A IN 5.0-MM-OD SMOOTH OR MICROFIN TUBES AT LOW MASS FLUXES
    Kim, Nae-Hyun
    JOURNAL OF ENHANCED HEAT TRANSFER, 2016, 23 (05) : 349 - 370
  • [47] Heat transfer characteristics of R410A-oil mixture flow boiling inside a 7 mm straight microfin tube
    Hu, Haitao
    Ding, Guoliang
    Wang, Kaijian
    INTERNATIONAL JOURNAL OF REFRIGERATION-REVUE INTERNATIONALE DU FROID, 2008, 31 (06): : 1081 - 1093
  • [49] Frictional pressure drop characteristics of R410A-oil mixture flow boiling inside a Ø7 mm horizontal straight smooth tube
    Inst. of Refrigeration and Cryogenics Eng., Shanghai Jiaotong Univ., Shanghai 200240, China
    不详
    Shanghai Jiaotong Daxue Xuebao, 2007, 3 (370-375):
  • [50] Flow boiling heat transfer and pressure drop of R32 inside 2.1 mm, 2.6 mm and 3.1 mm microfin tubes
    Jige, Daisuke
    Inoue, Norihiro
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2019, 134 : 566 - 573