Creep-fatigue crack growth behavior in inert and active environments for 30Cr1Mo1V steel

被引：0

作者：

Ren, Yanjie ^{[1
]}

Chen, Jian ^{[1
]}

He, Jianjun ^{[1
]}

Lu, Xuxiang ^{[1
]}

Li, Maojun ^{[1
]}

机构：

[1] Changsha Univ Sci & Technol, Sch Energy & Power Engn, Changsha 410114, Peoples R China

来源：

TRANSFERABILITY AND APPLICABILITY OF CURRENT MECHANICS APPROACHES | 2009年

关键词：

Creep-fatigue; Crack growth; 30Cr1Mo1V steel; Oxidation; NICKEL-BASE SUPERALLOYS; OXIDATION; TEMPERATURE; ENHANCEMENT; ALLOY;

D O I：

暂无

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

In the present study, in order to evaluate the effect of oxidation effect on the creep-fatigue crack growth for 30Cr1Mo1V steel, fatigue crack growth (FCG) rates, creep-fatigue crack growth (CFCG) rates had been measured at room temperature, 540 degrees C and 650 degrees C in air and in argon environment with different load frequencies and waveshape. The results showed that temperature has determined effect on FCG rates. At a given temperature, the environments and creep exerted pronounced influence on the fatigue resistance at low frequency. When the hold time periods in cyclic loading exceeded 360s, more serious influence on the CFCG rates could be observed.

引用

页码：251 / 254

页数：4

共 50 条

[21] CREEP FATIGUE CRACK-GROWTH IN 0.5CR-MO-V STEEL
NEATE, GJ
MATERIALS SCIENCE AND TECHNOLOGY, 1988, 4 (06) : 524 - 529
[22] Creep-fatigue crack behaviour of a mod. 9Cr-1Mo steel structure with weldments
Hyeong-Yeon Lee
Jong-Bum Kim
Woo-Gon Kim
Jae-Han Lee
Transactions of the Indian Institute of Metals, 2010, 63 : 245 - 250
[23] Creep-fatigue crack behaviour of a mod. 9Cr-1Mo steel structure with weldments
Lee, Hyeong-Yeon
Kim, Jong-Bum
Kim, Woo-Gon
Lee, Jae-Han
TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2010, 63 (2-3): : 245 - 250
[24] CREEP FATIGUE INTERACTIONS IN A 1 Cr Mo V STEEL - 1.
Ellison, E.G.
Paterson, A.J.F.
Proceedings of the Institution of Mechanical Engineers (London), 1976, 190 (12): : 321 - 332
[25] Research on the 30Cr1Mo1V rotor steel low cycle fatigue performances and damage development regulations
Li, Yawu
Li, Changbao
Wang, Meiying
Wang, Zhongqian
Qilunji Jishu/Turbine Technology, 40 (03): : 184 - 187
[26] Effect of loading rate on low-cycle fatigue damage of 30Cr1Mo1V rotor steel
Sun, Qingmin
Chen, Jian
He, Jianjun
Ren, Yanjie
Fu, Hao
Hu, Min
TRANSFERABILITY AND APPLICABILITY OF CURRENT MECHANICS APPROACHES, 2009, : 255 - 260
[27] Cavity growth simulation in 2.25Cr-1Mo steel under creep-fatigue loading
Ogata, Takashi
JOURNAL OF PRESSURE VESSEL TECHNOLOGY-TRANSACTIONS OF THE ASME, 2008, 130 (03): : 0314041 - 0314046
[28] Cavity growth simulation of 2.25Cr-1Mo steel under creep-fatigue loading
Ogata, Takashi
PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE 2005, VOL 6, 2005, 6 : 397 - 402
[29] CHARACTERIZATIONS OF CREEP CRACK-GROWTH IN 1-PERCENT CR MO V STEEL
SMITH, DJ
WEBSTER, GA
JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 1981, 16 (02): : 137 - 143
[30] Estimation of the damaging energy under creep-fatigue interaction conditions in 1Cr-Mo-V steel
Jeong, CY
Nam, SW
SCRIPTA MATERIALIA, 1999, 40 (05) : 623 - 629

← 1 2 3 4 5 →