Changes in chemical and physical properties of yellow poplar (Liriodendron tulipifera) during torrefaction

被引:18
|
作者
Na, Byeong-Il [1 ]
Ahn, Byoung-Jun [2 ]
Lee, Jae-Won [1 ]
机构
[1] Chonnam Natl Univ, Coll Agr & Life Sci, Dept Forest Prod & Technol, Kwangju 500757, South Korea
[2] Korea Forest Res Inst, Dept Forest Prod, Div Wood Chem & Microbiol, Seoul 130712, South Korea
基金
新加坡国家研究基金会;
关键词
HIGH-ENERGY DENSITY; BIOMASS; WOOD; GRINDABILITY; OPTIMIZATION; PRETREATMENT; IMPACT;
D O I
10.1007/s00226-014-0697-1
中图分类号
S7 [林业];
学科分类号
0829 ; 0907 ;
摘要
In this study, changes in the chemical and physical properties of yellow poplar were investigated during torrefaction. The torrefaction temperature was an important factor for changing the chemical compositions of the biomass. In particular, hemicelluloses were significantly affected by the torrefaction temperature. The torrefied biomass contained lower xylan and higher glucan and lignin concentrations than the raw material. The carbon content of the torrefied biomass increased from 44.80 to 52.96 % as the severity factor (SF), whereas the oxygen and hydrogen contents decreased from 45.08 to 36.77 and 5.89 to 5.62 %, respectively. The high carbon content in the torrefied biomass induced a decrease in the H/C and O/C ratios. The calorific value and weight loss increased proportionally to the SF. Under severe torrefaction conditions, the calorific value of the torrefied biomass was 20.84 MJ/kg, which represents an increase of 15.01 % compared to the raw material. Regarding the physical properties of the torrefied biomass, the moisture uptake capacity and specific energy consumption for grinding of biomass significantly decreased with increasing torrefaction severity. The torrefied biomass (55.1-65.6 kWh/t) required less energy than the raw material (145 kWh/t) for size reduction.
引用
收藏
页码:257 / 272
页数:16
相关论文
共 50 条
  • [31] Development of a BAC library for yellow-poplar (Liriodendron tulipifera) and the identification of genes associated with flower development and lignin biosynthesis
    Haiying Liang
    Eric G. Fang
    Jeffrey P. Tomkins
    Meizhong Luo
    David Kudrna
    Hye Ran Kim
    K. Arumuganathan
    Shaying Zhao
    James Leebens-Mack
    Scott E. Schlarbaum
    Jo Ann Banks
    Claude W. dePamphilis
    Dina F. Mandoli
    Rod A. Wing
    John E. Carlson
    Tree Genetics & Genomes, 2007, 3 : 215 - 225
  • [32] Characterization of by-products from organosolv pretreatments of yellow poplar wood (Liriodendron tulipifera) in the presence of acid and alkali catalysts
    Koo, Bon-Wook
    Park, Nahyun
    Jeong, Han-Seob
    Choi, Joon-Weon
    Yeo, Hwanmyeong
    Choi, In-Gyu
    JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY, 2011, 17 (01) : 18 - 24
  • [33] Development of a BAC library for yellow-poplar (Liriodendron tulipifera) and the identification of genes associated with flower development and lignin biosynthesis
    Liang, Haiying
    Fang, Eric G.
    Tomkins, Jeffrey P.
    Luo, Meizhong
    Kudrna, David
    Kim, Hye Ran
    Arumuganathan, K.
    Zhao, Shaying
    Leebens-Mack, James
    Schlarbaum, Scott E.
    Banks, Jo Ann
    dePamphilis, Claude W.
    Mandoli, Dina F.
    Wing, Rod A.
    Carlson, John E.
    TREE GENETICS & GENOMES, 2007, 3 (03) : 215 - 225
  • [34] APPLICATIONS OF SCANNING ELECTRON-MICROSCOPY TO ROOT-SOIL RELATIONSHIPS IN YELLOW POPLAR (LIRIODENDRON-TULIPIFERA L)
    COX, TL
    HULETT, LD
    SOIL SCIENCE, 1975, 120 (03) : 195 - 199
  • [35] Predicting moisture content of yellow-poplar (Liriodendron tulipifera L.) veneer using near infrared spectroscopy
    Adedipe, Oluwatosin Emmanuel
    Dawson-Andoh, Ben
    FOREST PRODUCTS JOURNAL, 2008, 58 (04) : 28 - 33
  • [36] Prediction of yellow-poplar (Liriodendron tulipifera) veneer stiffness and bulk density using near infrared spectroscopy and multivariate calibration
    Adedipe, Oluwatosin Emmanuel
    Dawson-Andoh, Ben
    JOURNAL OF NEAR INFRARED SPECTROSCOPY, 2008, 16 (05) : 487 - 496
  • [37] EFFECT OF EPOXY IMPREGNATION ON THE MOE AND MOR OF INTACT AND FAILED YELLOW-POPLAR (LIRIODENDRON-TULIPIFERA L) SAPWOOD BEAMS
    MOORE, GR
    GARGES, LD
    BLANKENHORN, PR
    KLINE, DE
    WOOD AND FIBER SCIENCE, 1984, 16 (04): : 508 - 517
  • [38] THE RELATIONSHIP OF EXTRACTIVE CONTENT TO PARTICLE-SIZE DISTRIBUTION IN MILLED YELLOW-POPLAR (LIRIODENDRON-TULIPIFERA L) BARK
    OTTONE, SP
    BALDWIN, RC
    WOOD AND FIBER, 1981, 13 (02): : 74 - 85
  • [39] Unlocking the Main Factors Affecting the Strength and Stability of Yellow Poplar (Liriodendron tulipifera) After a Mild and Environmentally Friendly Densification Process
    Bencsik, Balazs
    Denes, Levente
    Mcneel, Joseph
    Chaddock, Luke
    Oporto, Gloria S.
    FORESTS, 2025, 16 (02):
  • [40] Effects of stem size on stem respiration and its flux components in yellow-poplar (Liriodendron tulipifera L.) trees
    Fan, Hailan
    McGuire, Mary Anne
    Teskey, Robert O.
    TREE PHYSIOLOGY, 2017, 37 (11) : 1536 - 1545