Concrete strength tendency in the wall of cylindrical spun-cast concrete elements

被引：13

作者：

Volgyi, Istvan ^{[1
]}

Farkas, Gyoergy ^{[1
]}

Nehme, Salem G. ^{[2
]}

机构：

[1] BME, Dept Struct Engn, H-1111 Budapest, Hungary

[2] BME, Dept Construct Mat & Engn Mat, H-1521 Budapest, Hungary

来源：

PERIODICA POLYTECHNICA-CIVIL ENGINEERING | 2010年 / 54卷 / 01期

关键词：

spun-cast concrete; strength; experimental test; PERFORMANCE; POLES;

D O I：

10.3311/pp.ci.2010-1.03

中图分类号：

TU [建筑科学];

学科分类号：

0813 ;

摘要：

The aim of the research was to characterize the concrete mixtures for spun-cast concrete and to determine the relationship between the compacting ratio and the manner of segregation. In the research 23 specimens of 9 different mixtures with low w/c ratio were tested. Investigated parameters included w/c, spinning speed, duration, and properties of the aggregate. The strength of the concrete in the outer; middle and inner region of the spun-cast element and of the vibrated cube was assessed by testing drilled cores. The optimal compacting energy caused by spinning was defined for different mixtures. Statistical regression functions depending on the parameters above were defined for the change of strength in the wall of the element.

引用

页码：23 / 30

页数：8

共 50 条

[31] PERIPHERAL SHEAR-STRENGTH OF BIAXIALLY TENSIONED REINFORCED-CONCRETE WALL ELEMENTS
WHITE, RN
GERGELY, P
JAU, WC
NUCLEAR ENGINEERING AND DESIGN, 1982, 69 (02) : 271 - 277
[32] TENSILE TESTING OF CONCRETE BLOCK AND WALL ELEMENTS
HEDSTROM, RO
JOURNAL OF THE PCA RESEARCH AND DEVELOPMENT LABORATORIES, 1966, 8 (02): : 42 - &
[33] TENSION TESTS OF CONCRETE CONTAINMENT WALL ELEMENTS
SCHULTZ, DM
JULIEN, JT
RUSSELL, HG
NUCLEAR ENGINEERING AND DESIGN, 1984, 77 (03) : 381 - 391
[34] A study of the cast-in-situ structures' concrete strength
Kobeleva, S.A.
Montazhnye i Spetsial'nye Raboty v Stroitel'stve, 2001, (11): : 13 - 17
[35] Assessing strength variability of concrete structural elements
Castro, PF
Neto, AM
8th International Conference of the Slovenian Society for Non-Destructive Testing, Conference Proceedings: APPLICATION OF CONTEMPORARY NON-DESTRUCTIVE TESTING IN ENGINEERING, 2005, : 123 - 130
[36] The effect of cylindrical specimen size on the compressive strength of concrete
Yazici, Semsi
Sezer, Gozde Inan
BUILDING AND ENVIRONMENT, 2007, 42 (06) : 2417 - 2420
[37] ULTIMATE STRENGTH DESIGN OF CYLINDRICAL CONCRETE SHELL ROOFS
ELRAYYES, MS
JOURNAL OF THE UNIVERSITY OF KUWAIT-SCIENCE, 1987, 14 (01): : 59 - 75
[38] Using steel fibered high strength concrete for repairing continuous normal strength concrete bending elements
Holschemacher, K.
Iskhakov, I.
Ribakov, Y.
CONCRETE REPAIR, REHABILITATION AND RETROFITTING IV, 2016, : 89 - 89
[39] Damage imaging of concrete wall-like structures using cylindrical concrete implantable module
Yang, Ziqian
Chen, Qingjun
Li, Menglei
Yuan, Cheng
Zhang, Minghui
Kong, Qingzhao
STRUCTURAL HEALTH MONITORING-AN INTERNATIONAL JOURNAL, 2023, 22 (03): : 1776 - 1789
[40] Deformation behavior of the composite wall made of a gutter, a pre-cast embedded concrete mold and cast-in-place concrete
1600, Society of Materials Science Japan (63):

← 1 2 3 4 5 →