Experimental and Theoretical Evaluation of Stiffness Properties of Fused Deposition Modeling Parts

被引：0

作者：

Osborn, T. ^{[1
]}

Zhou, E. ^{[1
]}

Gerzeski, R. ^{[2
]}

Mollenhauer, D. ^{[2
]}

Tandon, G. P. ^{[1
]}

Whitney, T. J. ^{[3
]}

Iarve, E. V. ^{[1
]}

机构：

[1] Univ Dayton, Res Inst, 300 Coll Pk, Dayton, OH 45469 USA

[2] Air Force Res Lab, Wright Patterson AFB, OH USA

[3] Univ Dayton, Dayton, OH 45469 USA

来源：

PROCEEDINGS OF THE AMERICAN SOCIETY FOR COMPOSITES: THIRTIETH TECHNICAL CONFERENCE | 2015年

关键词：

COMPOSITES;

D O I：

暂无

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

An experimental and theoretical investigation of mechanical properties of the ULTEM 9085 FDM printed unidirectional parts was performed. The mechanical property prediction was performed based on three-dimensional homogenization methodology and did not involve any empirical coefficients. The only calibrated parameter was the insitu elastic modulus of the FDM roads. The influence of the shape of the air gap between the roads was investigated. Best agreement for the predicted and measured transverse modulus was achieved for the equilateral shape of the gap. Good agreement also was observed for shear modulus.

引用

页码：2589 / 2598

页数：10

共 50 条

[41] Evaluating Mechanical Properties and Failure Mechanisms of Fused Deposition Modeling Acrylonitrile Butadiene Styrene Parts
Uddin, M. S.
Sidek, M. F. R.
Faizal, M. A.
Ghomashchi, Reza
Pramanik, A.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 2017, 139 (08):
[42] Computation of Mechanical Properties of Parts Manufactured by Fused Deposition Modeling Using Finite Element Method
Gorski, Filip
Kuczko, Wieslaw
Wichniarek, Radoslaw
Hamrol, Adam
10TH INTERNATIONAL CONFERENCE ON SOFT COMPUTING MODELS IN INDUSTRIAL AND ENVIRONMENTAL APPLICATIONS, 2015, 368 : 403 - 413
[43] Thermo-mechanical properties of ABS parts fabricated by fused deposition modeling and vapor smoothing
Zhang, Sung-Uk
Han, Jonghyeuk
Kang, Hyun-Wook
Shin, Byoung-Chul
2017 18TH INTERNATIONAL CONFERENCE ON THERMAL, MECHANICAL AND MULTI-PHYSICS SIMULATION AND EXPERIMENTS IN MICROELECTRONICS AND MICROSYSTEMS (EUROSIME), 2017,
[44] Effect of fused deposition modeling process parameters on the mechanical properties of recycled polyethylene terephthalate parts
Bakir, Ali Alperen
Atik, Resul
Ozerinc, Sezer
JOURNAL OF APPLIED POLYMER SCIENCE, 2021, 138 (03)
[45] Properties of oriented carbon fiber/polyamide 12 composite parts fabricated by fused deposition modeling
Liao, Guangxin
Li, Zhixiang
Cheng, Yuchuan
Xu, Dingding
Zhu, Dingchun
Jiang, Shenglong
Guo, Jianjun
Chen, Xinde
Xu, Gaojie
Zhu, Yuejin
MATERIALS & DESIGN, 2018, 139 : 283 - 292
[46] Correlation Between Process Parameters and Mechanical Properties in Parts Printed by the Fused Deposition Modeling Process
Attoye, Samuel
Malekipour, Ehsan
El-Mounayri, Hazim
MECHANICS OF ADDITIVE AND ADVANCED MANUFACTURING, VOL 8, 2019, : 35 - 41
[47] Modeling of the chemical finishing process for polylactic acid parts in fused deposition modeling and investigation of its tensile properties
Jin, Yifan
Wan, Yi
Zhang, Bing
Liu, Zhanqiang
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2017, 240 : 233 - 239
[48] Experimental Study of the Effect of Post Processing Techniques on Mechanical Properties of Fused Deposition Modelled Parts
Rao, Addanki Sambasiva
Dharap, Medha A.
Venkatesh, J. V. L.
INTERNATIONAL JOURNAL OF MANUFACTURING MATERIALS AND MECHANICAL ENGINEERING, 2015, 5 (01) : 1 - 20
[49] Experimental investigation of fracture toughness of fused deposition modeling 3D-printed PLA parts
Kizhakkinan U.
Rosen D.W.
Raghavan N.
Materials Today: Proceedings, 2022, 70 : 631 - 637
[50] Analytical and Experimental Investigation into the Relative Influence of Core and Side Parts on Structures Laminated by Fused Deposition Modeling
An, Da-Sol
Kim, Tae Hyun
Lee, Eun-Ho
INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING-GREEN TECHNOLOGY, 2021, 8 (01) : 13 - 27

← 1 2 3 4 5 →