Nanoparticulate origin of intrinsic residual stress in thin films

被引:29
|
作者
Guisbiers, G. [1 ]
Van Overschelde, O. [1 ]
Wautelet, M. [1 ]
机构
[1] Univ Mons, B-7000 Mons, Belgium
关键词
nanostructure; grain size; grain morphology; residual stresses; phase transformation;
D O I
10.1016/j.actamat.2007.02.003
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The formation of grains in thin films generates intrinsic residual stress. In this work, we present a model of intrinsic residual stress calculation based on the size-dependent phase transitions of the nanograins. Evaporated thin films are produced by condensation from the vapor on the substrate. It is assumed that the starting nanograins grow from the liquid phase. It is well established that the melting temperature of nanoparticles is a function of their size. By assuming that the intrinsic stress originates from the volume change of the nanograins, and taking into account relaxation processes, the generated intrinsic residual stress in the films is evaluated. The results of the model are compared quantitatively with experimental data obtained from Ta, Mo, Pd and Al films deposited on Si. This model also gives a theoretical interpretation of Thornton and Hoffman's modelling of the stress-temperature diagram of thin films. (C) 2007 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码:3541 / 3546
页数:6
相关论文
共 50 条
  • [31] Assessment of Residual Stress on Thin Films by Laser Microtopography
    Costa, Manuel F. M.
    Teixeira, V.
    22ND CONGRESS OF THE INTERNATIONAL COMMISSION FOR OPTICS: LIGHT FOR THE DEVELOPMENT OF THE WORLD, 2011, 8011
  • [32] Understanding Residual Stress in Electrodeposited Cu Thin Films
    Chason, Eric
    Engwall, Alison
    Pei, Fei
    Lafouresse, Manon
    Bertocci, Ugo
    Stafford, Gery
    Murphy, Joseph A.
    Lenihan, Catherine
    Buckley, D. Noel
    JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2013, 160 (12) : D3285 - D3289
  • [33] Thin films' residual stress measurement by optical profilometry
    Costa, MFM
    ADVANCED PHOTONIC SENSORS AND APPLICATIONS II, 2001, 4596 : 1 - 8
  • [34] Residual Stress and Mechanical Properties of Polyimide Thin Films
    Jang, Wonbong
    Seo, Jongchul
    Lee, Choonkeun
    Paek, Sang-Hyon
    Han, Haksoo
    JOURNAL OF APPLIED POLYMER SCIENCE, 2009, 113 (02) : 976 - 983
  • [35] Residual stress in thin films PECVD depositions: a review
    Iliescu, C.
    Avram, M.
    Chen, B.
    Popescu, A.
    Dumitrescu, V.
    Poenar, D. P.
    Sterian, A.
    Vrtacnik, D.
    Amon, S.
    Sterian, P.
    JOURNAL OF OPTOELECTRONICS AND ADVANCED MATERIALS, 2011, 13 (2-4): : 387 - 394
  • [36] Fracture and residual stress in piezoelectric thin films for MEMS
    Bahr, DF
    Kennedy, MS
    Robinson, MC
    Shafer, KE
    Richards, CD
    Richards, RF
    ADVANCED MATERIALS FOR ENERGY CONVERSION II, 2004, : 393 - 400
  • [37] Ceramic buckling for determining the residual stress in thin films
    Gao, Zhaohe
    Zhang, Xun
    Kulczyk-Malecka, Justyna
    Chen, Ying
    Bousser, Etienne
    Kelly, Peter
    Xiao, Ping
    SCRIPTA MATERIALIA, 2021, 201
  • [38] Residual stress gradient of Cr and CrN thin films
    Arias, D. F.
    Gomez, A.
    Souza, R. M.
    Velez, J. M.
    MATERIALS CHEMISTRY AND PHYSICS, 2018, 204 : 269 - 276
  • [39] A model of residual stress in the fabrication of thin glass films
    Murray, PE
    JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 1996, 118 (02): : 213 - 216
  • [40] Deconvolution of dopant-derived extrinsic and intrinsic effects in TiO2 nanoparticulate thin films
    Ren, Hangjuan
    Wang, Jieyu
    Ma, Hongyang
    Cao, Fuyang
    Jiang, Yue
    Koshy, Pramod
    Sorrell, Charles Christopher
    NEW JOURNAL OF CHEMISTRY, 2018, 42 (24) : 19685 - 19691