Effect of welding speed on mechanical properties and corrosion resistance rates of filler induced friction stir welded AA6082 and AA5052 joints

被引：28
|
作者：
Sasikumar, A. [1 ]
Gopi, S. [1 ]
Mohan, Dhanesh [2 ]
机构：
[1] Govt Coll Technol, Dept Prod Engn, Coimbatore, Tamil Nadu, India
[2] Shandong Univ, Inst Mat Joining, Jinan, Peoples R China
来源：
MATERIALS RESEARCH EXPRESS | 2021年 / 8卷 / 06期
关键词：
friction stir welding; aluminium alloys; filler; microstructure; corrosion; BEHAVIOR;
D O I：
10.1088/2053-1591/ac0c9e
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Friction Stir Welding (FSW) was carried out to examine the influence of filler materials and varying process parameters on the microhardness and the joints corrosion resistance properties. Aluminium alloys 6082 and 5052, having 8 mm thickness was joined by varying parameters. The primary process parameters are rotational speed, tool travel speed, plunge depth, filler holes centre distance and filler ratio. The hardness at the weld nugget zone and corrosion rate evaluations were analyzed. The best results were obtained for the parameter combinations of 1150 rpm tool rotation, 130 mm min(-1) tool travel, 0.2 mm tool plunge, the filler holes centre distance 2 mm and a powder filler made of 95% magnesium and 5% chromium.
引用
收藏
页数：12
相关论文
共 50 条
  • [31] The mechanical properties of AA6082/AA1050 dissimilar joints subjected to multi-pass friction stir processing
    Muribwathoho, Oritonda
    Msomi, Velaphi
    Mabuwa, Sipokazi
    Merdji, Ali
    ENGINEERING RESEARCH EXPRESS, 2021, 3 (03):
  • [32] Effect of material positioning on Si-rich TIG welded joints of AA6082 and AA8011 by friction stir processing
    Mabuwa, Sipokazi
    Msomi, Velaphi
    Mehdi, Husain
    Saxena, Kuldeep Kumar
    JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2023, 37 (17) : 2484 - 2502
  • [33] Effect of Process Parameters and Tool Pin Profiles on Microstructural Evolution and Mechanical Properties of Friction Stir Welded AA5052
    Venugopal, Vishnu
    Singh, Virendra Pratap
    Kuriachen, Basil
    Shamasundara, M. S.
    ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, 2024,
  • [34] Optimization of Friction Stir Welding Parameters to Maximize Hardness of AA6082/Si3N4 and AA6082/SiC Composites Joints
    Rajesh Kumar Bhushan
    Deepak Sharma
    Silicon, 2022, 14 : 643 - 661
  • [35] A study of microstructure and mechanical properties of friction stir welding aluminium alloy AA6082 with Zn interlayer
    Singh, Avtar
    Kumar, Vinod
    Grover, Neel Kanth
    MATERIALS RESEARCH EXPRESS, 2019, 6 (11)
  • [36] Mechanical Properties of AA6082 welded Joints with Nd-YAG Laser
    Sasabe, Seiji
    Matsumoto, Tsuyoshi
    NEW FRONTIERS IN LIGHT METALS, 2010, : 373 - 383
  • [37] Optimization of Parameters for Maximum Tensile Strength of Friction Stir Welded AA6082/Si3N4 and AA6082/SiC Composite Joints
    Bhushan, Rajesh Kumar
    Sharma, Deepak
    SILICON, 2020, 12 (05) : 1195 - 1209
  • [38] Optimization of Parameters for Maximum Tensile Strength of Friction Stir Welded AA6082/Si3N4 and AA6082/SiC Composite Joints
    Rajesh Kumar Bhushan
    Deepak Sharma
    Silicon, 2020, 12 : 1195 - 1209
  • [39] Effect of welding parameters on the mechanical and microstructural properties of friction stir welded AA-2014 joints
    Khan, R.
    Bhatty, M. B.
    Iqbal, F.
    Zaigham, H.
    Salam, I.
    14TH INTERNATIONAL SYMPOSIUM ON ADVANCED MATERIALS (ISAM 2015), 2016, 146
  • [40] Effect of FSW process parameters on mechanical properties and microstructure of dissimilar welded joints of AA2024 and AA6082
    Kumar, Ravi
    Salah, A. Nait
    Kant, Neeraj
    Singh, Pushpender
    Hashmi, Abdul Wahab
    Malla, Chandrabhanu
    MATERIALS TODAY-PROCEEDINGS, 2022, 50 : 1435 - 1441
12345