COMPARISON OF VIRTUAL FIELDS METHOD, PARALLEL NETWORK MATERIAL MODEL AND FINITE ELEMENT UPDATING FOR MATERIAL PARAMETER DETERMINATION

被引：0
|
作者：
Dirisamer, Florian [1 ]
Cakmak, Umut D. [1 ]
Kallai, Imre [1 ]
Machado, Martin [1 ]
Major, Zoltan [1 ]
机构：
[1] Johannes Kepler Univ Linz, Inst Polymer Prod Engn, Altenbergstr 69, A-4040 Linz, Austria
来源：
INTERNATIONAL SYMPOSIUM ON EXPERIMENTAL METHODS AND NUMERICAL SIMULATION IN ENGINEERING SCIENCES (EXNUM 2016) | 2017年 / 7卷
关键词：
DIC; finite element updating; parallel network model; VFM; ELASTOMERS; TEMPERATURE; BEHAVIOR;
D O I：
10.14311/APP.2017.7.0007
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Extracting material parameters from test specimens is very intensive in terms of cost and time, especially for viscoelastic material models, where the parameters are dependent of time (frequency), temperature and environmental conditions. Therefore, three different methods for extracting these parameters were tested. Firstly, digital image correlation combined with virtual fields method, secondly, a parallel network material model and thirdly, finite element updating. These three methods are shown and the results are compared in terms of accuracy and experimental effort.
引用
收藏
页码：7 / 11
页数：5
相关论文
共 50 条
  • [31] The sensitivity method in finite element model updating: A tutorial
    Mottershead, John E.
    Link, Michael
    Friswell, Michael I.
    MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 2011, 25 (07) : 2275 - 2296
  • [32] A Successive Selection Method for finite element model updating
    Gou, Baiyong
    Zhang, Weijie
    Lu, Qiuhai
    Wang, Bo
    MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 2016, 70-71 : 320 - 333
  • [33] Constitutive parameter identification of 3D printing material based on the virtual fields method
    Dai, Xianglu
    Xie, Huimin
    MEASUREMENT, 2015, 59 : 38 - 43
  • [34] A novel approach for stochastic finite element model updating and parameter estimation
    Ma, Tianzheng
    Zhang, Yimin
    Huang, Xianzhen
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2014, 228 (18) : 3329 - 3342
  • [35] Finite element model updating of large structures by the clustering of parameter sensitivities
    Shahverdi, H.
    Mares, C.
    Wang, W.
    Greaves, C. H.
    Mottershead, J. E.
    MODERN PRACTICE IN STRESS AND VIBRATION ANALYSIS VI, PROCEEDINGS, 2006, 5-6 : 85 - +
  • [36] Finite Element Model Updating Based on Neural Network Ensemble
    He, Yuxuan
    Yin, Tao
    PROCEEDINGS OF THE 17TH EAST ASIAN-PACIFIC CONFERENCE ON STRUCTURAL ENGINEERING AND CONSTRUCTION, EASEC-17 2022, 2023, 302 : 721 - 729
  • [37] Analysis of adhesively bonded joints: a finite element method and a material model with damage
    Schmidt, Peter
    Edlund, Ulf
    INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING, 2006, 66 (08) : 1271 - 1308
  • [38] Finite element dynamic model updating using modal thermoelastic fields
    Humbert, L
    Thouverez, F
    Jezequel, L
    JOURNAL OF SOUND AND VIBRATION, 1999, 228 (02) : 397 - 420
  • [39] SIMULATION OF CONSOLIDATION IN LARGE STRAINS: A COMPARISON BETWEEN FINITE ELEMENT METHOD AND MATERIAL POINT METHOD
    Spiezia, N.
    Ceccato, F.
    Salomoni, V.
    Simonini, P.
    Coupled Problems in Science and Engineering VI, 2015, : 82 - 93
  • [40] Updating the finite element model of bridge structures by an improved Taguchi updating method
    Liu, Y.
    Li, H.
    Duan, Z.
    Yao, Y.
    BRIDGE MAINTENANCE, SAFETY, MANAGEMENT AND LIFE-CYCLE OPTIMIZATION, 2010, : 795 - +
12345