COMPARISON OF VIRTUAL FIELDS METHOD, PARALLEL NETWORK MATERIAL MODEL AND FINITE ELEMENT UPDATING FOR MATERIAL PARAMETER DETERMINATION

被引：0
|
作者：
Dirisamer, Florian [1 ]
Cakmak, Umut D. [1 ]
Kallai, Imre [1 ]
Machado, Martin [1 ]
Major, Zoltan [1 ]
机构：
[1] Johannes Kepler Univ Linz, Inst Polymer Prod Engn, Altenbergstr 69, A-4040 Linz, Austria
来源：
INTERNATIONAL SYMPOSIUM ON EXPERIMENTAL METHODS AND NUMERICAL SIMULATION IN ENGINEERING SCIENCES (EXNUM 2016) | 2017年 / 7卷
关键词：
DIC; finite element updating; parallel network model; VFM; ELASTOMERS; TEMPERATURE; BEHAVIOR;
D O I：
10.14311/APP.2017.7.0007
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Extracting material parameters from test specimens is very intensive in terms of cost and time, especially for viscoelastic material models, where the parameters are dependent of time (frequency), temperature and environmental conditions. Therefore, three different methods for extracting these parameters were tested. Firstly, digital image correlation combined with virtual fields method, secondly, a parallel network material model and thirdly, finite element updating. These three methods are shown and the results are compared in terms of accuracy and experimental effort.
引用
收藏
页码：7 / 11
页数：5
相关论文
共 50 条
  • [1] Identification of Material Parameters or Plasticity Models: A Comparative Study on the Finite Element Model Updating and the Virtual Fields Method
    Martins, J. M. P.
    Thuillier, S.
    Andrade-Campos, A.
    PROCEEDINGS OF 21ST INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING (ESAFORM 2018), 2018, 1960
  • [2] Finite element model updating of a composite material beam using direct updating method
    Bagha, Ashok Kumar
    Gupta, Prashant
    Panwar, Varun
    MATERIALS TODAY-PROCEEDINGS, 2020, 27 : 1947 - 1950
  • [3] Parameter Identification and Application of Virtual Material Model of Bolt Joint Based on Model Updating Method
    Lei S.
    Mao K.
    Tian W.
    Kong D.
    Jixie Gongcheng Xuebao/Journal of Mechanical Engineering, 2022, 58 (21): : 274 - 284
  • [4] Identification of the mechanical properties of materials with the virtual fields method, an alternative to finite element model updating
    Grédiac, M
    Toussaint, E
    Pierron, F
    COMPTES RENDUS MECANIQUE, 2002, 330 (02): : 107 - 112
  • [5] An improved method for parameter selection in finite element model updating
    Ratcliffe, MJ
    Lieven, NAJ
    AERONAUTICAL JOURNAL, 1998, 102 (1016): : 321 - 329
  • [6] Finite Element Model Updating for Material Model Calibration: A Review and Guide to Practice
    Chen, Bin
    Starman, Bojan
    Halilovic, Miroslav
    Berglund, Lars A.
    Coppieters, Sam
    ARCHIVES OF COMPUTATIONAL METHODS IN ENGINEERING, 2024,
  • [7] Parameter covariance and non-uniqueness in material model calibration using the Virtual Fields Method
    Jones, E. M. C.
    Carroll, J. D.
    Karlson, K. N.
    Kramer, S. L. B.
    Lehoucq, R. B.
    Reu, P. L.
    Turner, D. Z.
    COMPUTATIONAL MATERIALS SCIENCE, 2018, 152 : 268 - 290
  • [8] Identification of material and geometrical parameters for microstructures by dynamic finite element model updating
    Kun-Nan Chen
    Wei-Hsin Gau
    Yuh-Chung Hu
    Microsystem Technologies, 2006, 12 : 736 - 745
  • [9] Identification of material and geometrical parameters for microstructures by dynamic finite element model updating
    Chen, KN
    Gau, WH
    Hu, YC
    MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS, 2006, 12 (08): : 736 - 745
  • [10] Material parameter identification for orthotropic composite structure by the finite element method
    Li, Shuangbei
    Zhou, Xiaojun
    Huang, Lixin
    Guo, Xiangwu
    Fuhe Cailiao Xuebao/Acta Materiae Compositae Sinica, 2009, 26 (04): : 197 - 202
12345