A comparison of the quality of lead-free solder pastes

被引：3
|
作者：
Sitek, J [1 ]
Rocak, D
Bukat, K
Fajfar-Plut, J
Belavic, D
机构：
[1] Tele & Radio Res Inst, Warsaw, Poland
[2] Jozef Stefan Inst, Ljubljana, Slovenia
[3] HIPOT, R&D, Sentjernej, Slovenia
来源：
SOLDERING & SURFACE MOUNT TECHNOLOGY | 2004年 / 16卷 / 03期
关键词：
solders; viscosity; strength of materials; electronics industry;
D O I：
10.1108/09540910410562491
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The European Commission has decided that from the second half of 2006 only lead-free solder pastes will be permitted for use in the electronics industry. Earlier results of testing showed that lead-free solder pastes may not be appropriate for both printed-circuit-board (PCB) and hybrid-circuit applications, because of the materials' compatibility with the soldering process and with the solder pads. The basic properties of the investigated pastes show which of the tested solder pastes can be used for both applications. After selection of the appropriate solder pastes, reliability tests were conducted. The surface insulation resistance was tested for both the hybrid circuits and PCBs, whereas the mechanical strength of the soldered joints of components was only tested for the PCBs.
引用
收藏
页码：22 / 30
页数：9
相关论文
共 50 条
  • [21] Lead-free Flux Effect in Lead-free Solder Joint Improvement
    Leng, Eu Poh
    Ding, Min
    Ahmad, Ibrahim
    Jiun, Hoh Huey
    Hazlinda, Kamarudin
    IEMT 2006: 31ST INTERNATIONAL CONFERENCE ON ELECTRONICS MANUFACTURING AND TECHNOLOGY, 2006, : 541 - 548
  • [22] Synthesis of lead-free solder nanoparticles and their application as nano-inks and nano-pastes
    Cui, Qingzhou
    Rajathurai, Karunaharan
    Gao, Fan
    Gu, Zhiyong
    ABSTRACTS OF PAPERS OF THE AMERICAN CHEMICAL SOCIETY, 2010, 240
  • [23] Effect of thixotropic agents on the rheology of SnAgCu lead-free solder pastes used for jet printing
    Li, Saipeng
    Jiang, Chengming
    Hao, Jian
    Zhou, Jian
    Xue, Feng
    MATERIALS RESEARCH EXPRESS, 2019, 6 (05):
  • [24] Investigation of Wall-slip Behavior in Lead-free Solder Pastes and Isotropic Conductive Adhesives
    Durairaj, R.
    Man, Lam Wai
    Ramesh, S.
    Wea, Lim Chia
    Leng, Eu Poh
    Ekere, N. N.
    Mallik, S.
    Seman, A.
    2009 11TH ELECTRONICS PACKAGING TECHNOLOGY CONFERENCE (EPTC 2009), 2009, : 422 - +
  • [25] Effect of particle size distributions on the rheology of Sn/Ag/Cu lead-free solder pastes
    Zhang, S. S.
    Zhang, Y. J.
    Wang, H. W.
    MATERIALS & DESIGN, 2010, 31 (01) : 594 - 598
  • [26] Studies of the Thermal Conductivity and Thermal Resistance of Solder Layers with Lead-Free Pastes by the Photodeflection Method
    A. L. Glazov
    V. S. Kalinovskii
    E. V. Kontrosh
    K. L. Muratikov
    Technical Physics Letters, 2023, 49 : 265 - 268
  • [27] Studies of the Thermal Conductivity and Thermal Resistance of Solder Layers with Lead-Free Pastes by the Photodeflection Method
    Glazov, A. L.
    Kalinovskii, V. S.
    Kontrosh, E. V.
    Muratikov, K. L.
    TECHNICAL PHYSICS LETTERS, 2023, 49 (12) : 265 - 268
  • [28] Assessment of lead-free solder pastes with different type of powder for fine-pitch application
    Arazna, Aneta
    Koziol, Grazyna
    Steplewski, Wojciech
    Borecki, Janusz
    2008 31ST INTERNATIONAL SPRING SEMINAR ON ELECTRONICS TECHNOLOGY: RELIABILITY AND LIFE-TIME PREDICTION, 2008, : 579 - 584
  • [29] Thermophysical properties of some low temperature lead-free solder pastes dedicated to automotive applications
    Branzei, M.
    Plotog, I.
    Varzaru, G.
    Cucu, T. C.
    2016 IEEE 22ND INTERNATIONAL SYMPOSIUM FOR DESIGN AND TECHNOLOGY AND ELECTRONIC PACKAGING (SIITME), 2016, : 44 - 47
  • [30] Reliability of solder joints assembled with lead-free solder
    Ochiai, Masayuki
    Akamatsu, Toshiya
    Ueda, Hidefumi
    2002, Fujitsu Ltd (38):
12345