A numerical investigation of heat transfer mechanisms in gas-solid fluidized beds using the two-fluid granular temperature model

被引:7
|
作者
Gomes, Jefferson L. M. A.
Pain, Christopher C.
De Oliveira, Cassiano R. E.
Goddard, Antony J. H.
Oliveira, Francisco B. S.
机构
[1] Imperial Coll London, Dept Earth Sci & Engn, Computat Phys & Geophys Grp, London SW7 2AZ, England
[2] Georgia Inst Technol, George W Woodruff Sch Mech Engn, Atlanta, GA 30332 USA
[3] Univ Estado Rio De Janeiro, Inst Politecn, Nova Friburgo, RJ, Brazil
关键词
D O I
10.1080/01457630701194011
中图分类号
O414.1 [热力学];
学科分类号
摘要
In this work, the two-fluid granular temperature model is used to investigate the heat exchanged between a heated wall and a gas-solid fluidized bed. Numerical simulations were performed in 2-D and 3-D. uidized beds using a solid phase effective thermal conductivity correlation based on the granular temperature. The heat exchange in the bubbles' wake is investigated by tracking the train of bubbles that rises along the heated wall. Large heat transfer coef. cients were obtained in the rear wake region of bubbles due to relatively larger granular temperature there and intense particle circulation.
引用
收藏
页码:576 / 597
页数:22
相关论文
共 50 条
  • [21] Validation Study on Spatially Averaged Two-Fluid Model for Gas-Solid Flows: II. Application to Risers and Fluidized Beds
    Schneiderbauer, Simon
    AICHE JOURNAL, 2018, 64 (05) : 1606 - 1617
  • [22] Axial dispersion/population balance model of heat transfer in gas-solid turbulent fluidized beds
    Suele, Z.
    Lakatos, B. G.
    Mihalyko, Cs.
    COMPUTERS & CHEMICAL ENGINEERING, 2010, 34 (05) : 753 - 762
  • [23] Numerical investigation of effect of electrostatic forces on the hydrodynamics of gas-solid fluidized beds
    Hassani, M. A.
    Zarghami, R.
    Norouzi, H. R.
    Mostoufi, N.
    POWDER TECHNOLOGY, 2013, 246 : 16 - 25
  • [24] Heat transfer efficiency in gas-solid fluidized beds with flat and corrugated walls
    Wardag, Alam Nawaz Khan
    Larachi, Faical
    CHEMICAL PRODUCT AND PROCESS MODELING, 2024, 19 (05): : 795 - 807
  • [25] Wall-to-bed heat transfer in gas-solid bubbling fluidized beds
    Patil, DJ
    Smit, J
    Annaland, MV
    Kuipers, JAM
    AICHE JOURNAL, 2006, 52 (01) : 58 - 74
  • [26] Investigation of Gas-Solid Flow Dynamics and Heat Transfer in Fluidized Beds by Using DEM-LES Coupling Approach
    Wang, Shuai
    Luo, Kun
    Hu, Chenshu
    Fan, Jianren
    PROCEEDINGS OF THE 7TH INTERNATIONAL CONFERENCE ON DISCRETE ELEMENT METHODS, 2017, 188 : 1023 - 1035
  • [27] GAS-SOLID INTERFACIAL HEAT-TRANSFER IN CIRCULATING FLUIDIZED-BEDS
    WATANABE, T
    YONG, C
    NARUSE, I
    HASATANI, M
    KAGAKU KOGAKU RONBUNSHU, 1992, 18 (05) : 600 - 606
  • [28] A study of bubbling and slugging fluidised beds using the two-fluid granular temperature model
    Pain, CC
    Mansoorzadeh, S
    de Oliveira, CRE
    INTERNATIONAL JOURNAL OF MULTIPHASE FLOW, 2001, 27 (03) : 527 - 551
  • [29] Gas turbulence modulation in a two-fluid model for gas-solid flows
    Zhang, YH
    Reese, JM
    AICHE JOURNAL, 2003, 49 (12) : 3048 - 3065
  • [30] Heat transfer mechanisms in a gas-liquid-solid fluidized beds
    Patnaik, K. S. K. Rao
    WCECS 2007: WORLD CONGRESS ON ENGINEERING AND COMPUTER SCIENCE, 2007, : 114 - 119