Fabrication and oxidation behavior of Cr2AlC coating on Ti6242 alloy

被引：112

作者：

Wang, Q. M. ^{[1
,2
]}

Renteria, A. Flores ^{[1
]}

Schroeter, O. ^{[1
]}

Mykhaylonka, R. ^{[1
]}

Leyens, C. ^{[1
]}

Garkas, W. ^{[1
]}

to Baben, M. ^{[3
]}

机构：

[1] Brandenburg Tech Univ Cottbus, D-03046 Cottbus, Germany

[2] Acad Sinica, Inst Met Res, Div Surface Engn Mat, Shenyang 110015, Peoples R China

[3] Rhein Westfal TH Aachen, D-52074 Aachen, Germany

来源：

SURFACE & COATINGS TECHNOLOGY | 2010年 / 204卷 / 15期

基金：

美国国家科学基金会;

关键词：

Cr2AlC coating; MAX-phase; Near-alpha titanium alloy; Oxidation; HIGH-TEMPERATURE OXIDATION; M(N+1)AX(N) PHASES; THIN-FILMS; TI3SIC2; MICROSTRUCTURE; DEPOSITION; STABILITY; TI2ALC;

D O I：

10.1016/j.surfcoat.2010.01.002

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

An similar to 5 mu m Cr2AlC coating was synthesized on near-a titanium alloy Ti6242 using an industrially sized magnetron sputtering coater. Isothermal oxidation at 700 degrees C and 800 degrees C, and cyclic oxidation at 700 degrees C of the bare alloys and coated specimens were investigated in air. The results indicated that the Ti6242 alloy faced serious oxidation problems at 700 degrees C and 800 degrees C. Repeated formation and spallation of the multilayered oxide scale on the Ti6242 alloy occurred during oxidation testing. The coated specimens exhibited much better oxidation behaviour as compared to the bare alloy. A continuous Al-rich oxide scale formed on the coating surface during the initial oxidation stages. The oxide scale and coating itself acted as diffusion barriers blocking the further ingress of oxygen and protected the substrate alloy from oxidation. The oxidation mechanisms of the bare alloy and the coated specimens were investigated based on the experimental results. (C) 2010 Elsevier BM. All rights reserved.

引用

页码：2343 / 2352

页数：10

共 50 条

[41] On the interactions of Ti2AlC, Ti3AlC2, Ti3SiC2 and Cr2AlC with palladium at 900 °C
Bentzel, G. W.
Sokol, M.
Griggs, J.
Lang, A. C.
Barsoum, M. W.
JOURNAL OF ALLOYS AND COMPOUNDS, 2019, 771 : 1103 - 1110
[42] On the role of water vapor and oxygen on the fatigue crack propagation behavior at 550 °C of a Ti6242 alloy
C. Sarrazin-Baudoux
F. Loubat
S. Potiron
Metallurgical and Materials Transactions A, 2006, 37 : 1201 - 1209
[43] Influence of microstructure of pyrocarbon coating on mechanical properties of SiC/Ti6242 composite
Carrere, N
Lardillier, F
Vidal-Sétif, MH
Valle, R
MATERIALS SCIENCE AND TECHNOLOGY, 2003, 19 (05) : 669 - 675
[44] Oxidation behavior of Cr2AlC ceramics at 1,100 and 1,250 °C
Tian, Wubian
Wang, Peiling
Kan, Yanmei
Zhang, Guojun
JOURNAL OF MATERIALS SCIENCE, 2008, 43 (08) : 2785 - 2791
[45] Oxidation behavior of Cr2AlC ceramics at 1,100 and 1,250 °C
Wubian Tian
Peiling Wang
Yanmei Kan
Guojun Zhang
Journal of Materials Science, 2008, 43 : 2785 - 2791
[46] Comparison of the High-Temperature Oxidation Behavior of Cr2AlC MAX Phase and CoNiCrAlY Compounds
Shamsipoor, A.
Farvizi, M.
Razavi, M.
Keyvani, A.
Mousavi, B.
OXIDATION OF METALS, 2021, 95 (1-2): : 1 - 21
[47] Enhancing the high temperature oxidation behavior of Cr2AlC coatings by reducing grain boundary nanoporosity
Chen, Xiang
Stelzer, Bastian
Hans, Marcus
Iskandar, Riza
Mayer, Joachim
Schneider, Jochen M.
MATERIALS RESEARCH LETTERS, 2021, 9 (03): : 127 - 133
[48] Thermal shock behavior of Cr2AlC in different quenching media
Li, Haolin
Li, Shibo
Du, Xuesong
Bao, Peiwei
Zhou, Yang
MATERIALS LETTERS, 2016, 167 : 131 - 133
[49] Comparison of the High-Temperature Oxidation Behavior of Cr2AlC MAX Phase and CoNiCrAlY Compounds
A. Shamsipoor
M. Farvizi
M. Razavi
A. Keyvani
B. Mousavi
Oxidation of Metals, 2021, 95 : 1 - 21
[50] Tailoring Magnetic Properties of MAX Phases, a Theoretical Investigation of (Cr2Ti)AlC2 and Cr2AlC
Wang, Jiemin
Liu, Zhimou
Zhang, Haibin
Wang, Jingyang
JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2016, 99 (10) : 3371 - 3375

← 1 2 3 4 5 →