Simulation and Experimental Investigation for the End Milling Process of 7075-T7451 Aluminum Alloy

被引：5
|
作者：
Wang, C. K. [1 ]
Qin, G. H. [1 ]
Lu, D. [1 ]
Xin, S. Q. [1 ]
机构：
[1] Nanchang Hangkong Univ, Sch Aeronaut Mfg Engn, Nanchang 330063, Jiangxi, Peoples R China
来源：
MANUFACTURING SCIENCE AND ENGINEERING, PTS 1-5 | 2010年 / 97-101卷
关键词：
finite element analysis; oblique cutting; milling force; aluminum alloy;
D O I：
10.4028/www.scientific.net/AMR.97-101.3014
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
During the milling operation, milling forces are the main factor to cause the machining deformation of the workpiece. The flow stress of Al 7075-T7451 was first described as a function of strain, stain rate and temperature in order to obtain the true behavior in machining process. Second, a finite element method of milling process of Al 7075-T7451 was developed to obtain milling force simulations. Finally, simulated results are compared with experimental data and are shown to be in good agreement with each other.
引用
收藏
页码：3014 / 3019
页数：6
相关论文
共 50 条
  • [41] Dynamic simulation whole process optimization and experimental verification of milling aviation aluminum alloy aircraft structure
    Mo, Genlin
    Liu, Jing
    Li, Liangliang
    Li, Pengfei
    Gong, Yadong
    Zhou, Jianzhong
    Lu, Jinzhong
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2022, 121 (7-8): : 5377 - 5386
  • [42] Influence of milling parameters on the microstructural evolution mechanism of 7075-T6 aluminum alloy
    Zhang, Ping
    Zhang, Songting
    Zhang, Jinlong
    Sun, Yajie
    Zhou, Hanping
    Yue, Xiujie
    VACUUM, 2024, 222
  • [43] Experimental Investigation on the Deformation Behaviour and Curve Prediction Method of 7075 Aluminum Alloy
    Yu, Haonan
    Li, Changjian
    Wu, Bo
    Yang, Sisheng
    Peng, Hao
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2025,
  • [44] Numerical modeling and experimental assessment of dynamic behavior of aluminum alloy 7075-T6 in machining process
    Ahmadi, Seyed Amirhossein
    Davoodi, Behnam
    Niknam, Seyed Ali
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2024, 135 (3-4): : 1131 - 1149
  • [45] Experimental study on cold forming process of 7075 aluminum alloy in W temper
    Min, Junying
    Xie, Fangli
    Liu, Yi
    Hou, Zeran
    Lu, Jiaxin
    Lin, Jianping
    CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY, 2022, 37 : 11 - 18
  • [46] Investigation of corrosion behaviour of hydrogenated 7075-T6 aluminum alloy
    El-Amoush, Amjad Saleh
    Journal of Alloys and Compounds, 2007, 443 (1-2): : 171 - 177
  • [47] Investigation of corrosion behaviour of hydrogenated 7075-T6 aluminum alloy
    Ei-Amoush, Amjad Saleh
    JOURNAL OF ALLOYS AND COMPOUNDS, 2007, 443 (1-2) : 171 - 177
  • [48] 循环载荷幅值对7075-T7451铝合金疲劳裂纹扩展行为的影响
    黄志伟
    汪静雪
    张兴权
    段士伟
    陈斌
    黄志来
    裴善报
    金属热处理, 2016, 41 (09) : 38 - 42
  • [49] 航空铝合金7075-T7451三维铣削过程有限元仿真
    路冬
    李剑峰
    融亦鸣
    孙杰
    中国机械工程, 2008, (22) : 2708 - 2710
  • [50] Investigation of vibration analysis during end milling process of monel alloy
    Shihan, Muhammed
    Chandradass, J.
    Kannan, T. T. M.
    MATERIALS TODAY-PROCEEDINGS, 2021, 39 : 695 - 699
12345