Micro-electro-discharge machining of bulk metallic glasses

被引：0
|
作者：
Zhang, Xingchao [1 ]
Yong, Zhang [1 ]
Hao, Tong [2 ]
Yong, Li [2 ]
Chen, Xiaohua [1 ]
Chen, Guoliang [1 ]
机构：
[1] Univ Sci & Technol Beijing, State Key Lab Adv Met & Mat, Beijing 100083, Peoples R China
[2] Tsinghua Univ, Dept Prec Inst & Mechanol, Beijing 100084, Peoples R China
来源：
HDP'07: PROCEEDINGS OF THE 2007 INTERNATIONAL SYMPOSIUM ON HIGH DENSITY PACKAGING AND MICROSYSTEM INTEGRATION | 2007年
基金：
中国国家自然科学基金;
关键词：
D O I：
暂无
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
Microholes and three-dimensional microstructures machined on the La62Al14Ni12Cu12, Zr55Al10Ni5Cu30 and Cu46Zr44Al7Y3 bulk metallic glasses by micro-electro-discharge machining are evaluated in this study. The recast layer and heat affected zone surrounding the entry edge of the holes and the surface quality of three-dimensional microstructures were qualitatively analyzed using SEM, and the mechanical performance tests around the holes were carried out by nanoindentation. The experiment results demonstrated that the machined samples kept the amorphous structure without devitrification and the Machining characteristics are related to the thermophysical properties of the alloys.
引用
收藏
页码：213 / +
页数：2
相关论文
共 50 条
  • [21] Studies on quality of microholes generated on Al 1100 using micro-electro-discharge machining process
    Dave, H. K.
    Mathai, V. J.
    Desai, K. P.
    Raval, H. K.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2015, 76 (1-4): : 127 - 140
  • [22] Studies on quality of microholes generated on Al 1100 using micro-electro-discharge machining process
    H. K. Dave
    V. J. Mathai
    K. P. Desai
    H. K. Raval
    The International Journal of Advanced Manufacturing Technology, 2015, 76 : 127 - 140
  • [23] Field-Emission from Carbon Nanotube Cones Fabricated by Micro-Electro-Discharge Machining
    Moghaddam, M. Vahdani
    Sarwar, M. S.
    Xiao, Z.
    Dahmardeh, M.
    Takahata, K.
    Nojeh, A.
    2013 26TH INTERNATIONAL VACUUM NANOELECTRONICS CONFERENCE (IVNC), 2013,
  • [24] Toward development of a new online tool wear compensation strategy in micro-electro-discharge machining drilling
    Nirala, C. K.
    Saha, P.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2017, 231 (04) : 588 - 599
  • [25] Estimation of tool wear compensation during micro-electro-discharge machining of silicon using process simulation
    Muralidhara
    Vasa, N. J.
    Singaperumal, M.
    MICROMACHINING AND MICROFABRICATION PROCESS TECHNOLOGY XV, 2010, 7590
  • [26] HIGH-PRECISION DRY MICRO-ELECTRO-DISCHARGE MACHINING OF CARBON-NANOTUBE FORESTS WITH ULTRALOW DISCHARGE ENERGY
    Saleh, Tanveer
    Dahmardeh, Masoud
    Bsoul, Anas
    Nojeh, Alireza
    Takahata, Kenichi
    2012 IEEE 25TH INTERNATIONAL CONFERENCE ON MICRO ELECTRO MECHANICAL SYSTEMS (MEMS), 2012,
  • [27] Study on shaping spherical Poly Crystalline Diamond tool by Micro-electro-Discharge Machining and micro-grinding with the tool
    Masaki, Takeshi
    Kuriyagawa, Tsunemoto
    Yan, Jiwang
    Yoshihara, Nobuhito
    INTERNATIONAL JOURNAL OF SURFACE SCIENCE AND ENGINEERING, 2007, 1 (04) : 344 - 359
  • [28] Dry micro-electro-discharge machining of carbon-nanotube forests using sulphur-hexafluoride
    Saleh, Tanveer
    Dahmardeh, Masoud
    Nojeh, Alireza
    Takahata, Kenichi
    CARBON, 2013, 52 : 288 - 295
  • [29] Real-time wireless monitoring of workpiece material and debris characteristics in micro-electro-discharge machining
    Richardson, Mark T.
    Gianchandani, Yogesh B.
    MEMS 2008: 21ST IEEE INTERNATIONAL CONFERENCE ON MICRO ELECTRO MECHANICAL SYSTEMS, TECHNICAL DIGEST, 2008, : 379 - 382
  • [30] Investigation on the effect of dielectrics during micro-electro-discharge machining of Ti-6Al-4V
    Tiwary, A. P.
    Pradhan, B. B.
    Bhattacharyya, B.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2018, 95 (1-4): : 861 - 874
12345