Performance analysis and design of parallel kinematic machines using interval analysis

被引：20
|
作者：
Viegas, Carlos [1 ]
Daney, David [2 ]
Tavakoli, Mahmoud [1 ]
de Almeida, Anibal T. [1 ]
机构：
[1] Univ Coimbra, Inst Syst & Robot, Coimbra, Portugal
[2] INRIA, Bordeaux, France
来源：
MECHANISM AND MACHINE THEORY | 2017年 / 115卷
关键词：
Parallel manipulator; Interval analysis; Design methodology; Workspace determination; ARCHITECTURE OPTIMIZATION; SENSITIVITY-ANALYSIS; ALGORITHM; ACCURACY; GUARANTEED; BRANCH;
D O I：
10.1016/j.mechmachtheory.2017.05.003
中图分类号：
TH [机械、仪表工业];
学科分类号：
0802 ;
摘要：
Some design methodologies for Parallel Kinematic Machines (PKM) have been proposed but with limitations regarding two main problems: how to improve multiple properties of different nature such as accuracy, force or singularity poses, and how to check these properties for all poses inside the PKM workspace. To address these problems, this work proposes to formulate the design problem as a feasibility problem and use a data representation which takes into account the uncertainty or variation of the involved parameters. This method, based on interval analysis, allows to evaluate several performance indexes of a PKM design. For validation purposes, this methodology is applied to a PKM, obtaining a continuous set of possible kinematic parameters values for its architecture which is capable of fulfilling several performance requirements over a desired workspace. (C) 2017 Elsevier. Ltd. All rights reserved.
引用
收藏
页码：218 / 236
页数：19
相关论文
共 50 条
  • [41] Inverse kinematic solution of robot manipulators using interval analysis
    J Mech Des, Trans ASME, 1 (147-150):
  • [42] Inverse kinematic solution of robot manipulators using interval analysis
    Rao, RS
    Asaithambi, A
    Agrawal, SK
    JOURNAL OF MECHANICAL DESIGN, 1998, 120 (01) : 147 - 150
  • [43] Drive Design of parallel kinematic Machines by Using practical relevant Construction- and Calculation Tools
    Teichgraeber, Carsten
    Berger, Maik
    Wueglitz, Joerg
    BEWEGUNGSTECHNIK 2012, 2012, 2175 : 31 - 44
  • [44] Design of cable-driven parallel manipulators for a specific workspace using interval analysis
    Lamine, Houssein
    Bennour, Sami
    Romdhane, Lotfi
    ADVANCED ROBOTICS, 2016, 30 (09) : 585 - 594
  • [45] Design, simulation and performance analysis of LQG controller for structures with parametric uncertainties using interval analysis
    Chennuri, S. B.
    Singh, S. P.
    Dutt, J. K.
    PROCEEDINGS OF INTERNATIONAL CONFERENCE ON NOISE AND VIBRATION ENGINEERING (ISMA2012) / INTERNATIONAL CONFERENCE ON UNCERTAINTY IN STRUCTURAL DYNAMICS (USD2012), 2012, : 4513 - 4522
  • [46] Integrated design toolbox for tripod-based parallel kinematic machines
    Bi, Z. M.
    Lang, S. Y. T.
    Zhang, D.
    Orban, P. E.
    Verner, M.
    JOURNAL OF MECHANICAL DESIGN, 2007, 129 (08) : 799 - 807
  • [47] Structure Design and Task Planning of Reconfigurable Parallel Kinematic Machines System
    Tang, Xiaoqiang
    Lin, Chunshen
    Liu, Xin-Jun
    Chen, Xu
    Wang, Dianjun
    RECONFIGURABLE MECHANISMS AND ROBOTS, 2009, : 209 - 216
  • [48] Combining Structural and Kinematic Analysis Using Interval Analysis for a Wire-Driven Manipulator
    Abdelaziz, S.
    Renaud, P.
    Bayle, B.
    de Mathelin, M.
    ADVANCES IN ROBOT KINEMATICS: MOTION IN MAN AND MACHINE, 2010, : 147 - 156
  • [49] Chebyshev inclusion function based interval kinetostatic modeling and parameter sensitivity analysis for Exechon-like parallel kinematic machines with parameter uncertainties
    Tang, Tengfei
    Luo, Haiwei
    Song, Yaqing
    Fang, Hanliang
    Zhang, Jun
    MECHANISM AND MACHINE THEORY, 2021, 157
  • [50] Performance Analysis of MPI Parallel Programs on Xen Virtual Machines
    Xu, Jungang
    Zhao, Yue
    Zhan, Kunlin
    Li, Hui
    Han, Xiuqi
    2013 IEEE 15TH INTERNATIONAL CONFERENCE ON HIGH PERFORMANCE COMPUTING AND COMMUNICATIONS & 2013 IEEE INTERNATIONAL CONFERENCE ON EMBEDDED AND UBIQUITOUS COMPUTING (HPCC_EUC), 2013, : 1528 - 1535
12345