Simplified Material Solution for Orthotropic Symmetrical GFRP Laminates for Structural Facades

被引：3
|
作者：
Zhao, Yuchao [1 ]
Jiang, Xu [2 ]
Zhang, Qilin [1 ]
Qiang, Xuhong [1 ]
机构：
[1] Tongji Univ, Dept Struct Engn, Shanghai 200092, Peoples R China
[2] Tongji Univ, Dept Bridge Engn, Shanghai 200092, Peoples R China
来源：
ADVANCES IN CIVIL ENGINEERING | 2019年 / 2019卷
基金：
中国国家自然科学基金;
关键词：
CONCRETE BEAMS; COMPOSITES; STRENGTH;
D O I：
10.1155/2019/1407383
中图分类号：
TU [建筑科学];
学科分类号：
0813 ;
摘要：
GFRP (glass-fiber-reinforced polymer), as a composite material, possesses many favorable properties including high strength and low weight and is amenable to unique processing methods; therefore, it is a potential free-form surface material. However, the complex design theory owing to anisotropy limits its application. Thus, a simplified material solution becomes significant. In this study, the strength and stiffness of orthotropic symmetrical GFRP laminates are derived theoretically, and a simplified material solution is proposed to simplify the anisotropy as isotropy. Then, using the numerical simulation of an actual orthotropic symmetrical GFRP laminate free-form facade structure, the effectiveness of the simplified material solution is analyzed and evaluated. This solution can provide guidance for similar GFRP facades and further promote the application of GFRP in engineering.
引用
收藏
页数：15
相关论文
共 50 条
  • [21] Mechanical Characterization of GFRP Tiled Laminates for Structural Engineering Applications: Stiffness, Strength and Failure Mechanisms
    Uyttersprot, Jordi
    De Corte, Wouter
    Van Paepegem, Wim
    JOURNAL OF COMPOSITES SCIENCE, 2024, 8 (07):
  • [22] Structural dynamics of electric machine stators: Modelling guidelines and identification of three-dimensional equivalent material properties for multi-layered orthotropic laminates
    Millithaler, P.
    Sadoulet-Reboul, E.
    Ouisse, M.
    Dupont, J. -B.
    Bouhaddi, N.
    JOURNAL OF SOUND AND VIBRATION, 2015, 348 : 185 - 205
  • [23] Extension of the Voronoi Diagram Algorithm to Orthotropic Space for Material Structural Design
    Bolshakov, Pavel
    Kharin, Nikita
    Agathonov, Alexander
    Kalinin, Evgeniy
    Sachenkov, Oskar
    BIOMIMETICS, 2024, 9 (03)
  • [24] Structural Performance of Concrete Beams with Micro-reinforcement Strengthened with GFRP Laminates under Monotonic Loading
    Rex, L. K.
    Premalatha, P., V
    JOURNAL OF TESTING AND EVALUATION, 2020, 48 (05) : 3779 - 3800
  • [25] DEVELOPMENT OF BALSA WOOD LAMINATES - A SHORT ACCOUNT OF USE OF BALSA WOOD LAMINATES AS A STRUCTURAL MATERIAL FOR AIRCRAFT
    ANCIENT, BJ
    AIRCRAFT ENGINEERING, 1968, 40 (10): : 29 - &
  • [26] Mechanical study on initial profile solution for inflatable reflector made of orthotropic material
    Huang, He
    Guan, Fu-ling
    ACTA ASTRONAUTICA, 2014, 104 (01) : 179 - 185
  • [27] Displacement potential solution of a deep stiffened cantilever beam of orthotropic composite material
    Nath, S. K. Deb
    Afsar, A. M.
    Ahmed, S. Reaz
    JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 2007, 42 (07): : 529 - 541
  • [28] An experimental study of high-velocity multiple impact on the structural behaviour of GFRP Cross-Ply laminates
    Paredes-Gordillo, Marco A.
    Ivanez, Ines
    Garcia-Castillo, Shirley K.
    Navarro, Carlos
    ENGINEERING FAILURE ANALYSIS, 2025, 174
  • [29] Exact analytical solution of unsteady axi-symmetric conductive heat transfer in cylindrical orthotropic composite laminates
    Delouei, A. Amiri
    Kayhani, M. H.
    Norouzi, M.
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2012, 55 (15-16) : 4427 - 4436
  • [30] An inverse solution for winding stresses in wound coils of linear orthotropic material with large deformations
    de Hoog, F. R.
    Cozijnsen, M.
    Yuen, W. Y. D.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 2007, 221 (06) : 639 - 652
12345