1-Step "Quenching and Partitioning" of the Press-Hardening Steel 22MnB5

被引:6
|
作者
Wolf, Lars O. [1 ]
Nuernberger, Florian [1 ]
Rodman, Dmytro [1 ]
Maier, Hans Juergen [1 ]
机构
[1] Inst Werkstoffkunde Mat Sci, Univ 2, D-30823 Garbsen, Germany
关键词
quenching and partitioning process; intercritical annealing; 22MnB5; TRIP; RETAINED AUSTENITE; P STEEL; MARTENSITE; STABILITY; TRANSFORMATION;
D O I
10.1002/srin.201600307
中图分类号
TF [冶金工业];
学科分类号
0806 ;
摘要
In recent years, high strength steels, particularly press-hardening steel, have been more extensively employed for manufacturing safety-relevant structural components in vehicle bodies. These applications require contrasting material properties such as extremely high strengths as well as high forming ductility. Owing to the purely martensitic microstructure, the residual ductility of the conventional press hardened steels is low. Quenching and partitioning heat treatments can fulfil the requirement of an increased residual ductility by stabilizing the retained austenite. Moreover, if the quenching and partitioning heat treatments are carried out after intercritical annealing treatment, then the steel's mechanical properties can be tailored by defining the volume fraction of ferrite in the microstructure. In order to determine the potential of an 1-step quenching and partitioning heat treatment combined with intercritical annealing processes, elevated contents of retained austenite are produced in ferritic-martensitic microstructures using the low-alloyed 22MnB5 steel grade. In addition to a tempered martensitic microstructure, secondary martensite, and a low fraction of retained austenite, the microstructure consists of remaining fractions of ferrite; thus, providing an additional increase in ductility. For this optimized microstructure, a yield stress of 513MPa and a tensile strength of 1045MPa are measured with a total elongation of 10.8%.
引用
收藏
页数:14
相关论文
共 50 条
  • [41] Achieving Excellent Strength-Ductility Combination by Cyclic Quenching Treatment in 22MnB5 Steel
    Pan, Haijun
    Wei, Chaofan
    Yu, Wangwang
    Li, Xinyu
    Qiao, Bo
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2022, 31 (08) : 6659 - 6663
  • [42] Research on Mechanical Properties of 22MnB5 Steel Quenched in a Steel Die
    贺连芳
    赵国群
    李辉平
    相楠
    Journal of Shanghai Jiaotong University(Science), 2011, 16 (02) : 129 - 132
  • [43] A Model for Quenching and Partitioning with Press Hardening of High Strength Steel
    Liu, Zhuang
    Zhu, Bin
    Zhang, Yisheng
    Ding, Hua
    Cai, Minghui
    Wang, Yanan
    Rolfe, Bernard
    HOT SHEET METAL FORMING OF HIGH-PERFORMANCE STEEL: CHS2, 6TH INTERNATIONAL CONFERENCE, 2017, 2017, : 309 - 316
  • [44] Research on mechanical properties of 22MnB5 steel quenched in a steel die
    He L.-F.
    Zhao G.-Q.
    Li H.-P.
    Xiang N.
    Journal of Shanghai Jiaotong University (Science), 2011, 16 (2) : 129 - 132
  • [45] Effect of Deformation Temperature on the Microstructure of Boron Steel 22MnB5
    Min, Junying
    Lin, Jianping
    Li, Jiayue
    ADVANCED SCIENCE LETTERS, 2011, 4 (03) : 938 - 942
  • [46] Study on 22MnB5 Steel Microstructure in Hot Forming Progress
    Chen, Meng
    Bi, Dasen
    Chu, Liang
    Gao, Xianchen
    Li, Peilin
    PROGRESS IN MATERIALS AND PROCESSES, PTS 1-3, 2013, 602-604 : 1975 - 1979
  • [47] Numerical Investigation on Springback of 22MnB5 Steel in Hot Stamping
    Li, Dong-cheng
    Wang, Guo-hui
    Liu, Hua-min
    Chen, Qing-min
    INTERNATIONAL CONFERENCE ON ADVANCED MANUFACTURE TECHNOLOGY AND INDUSTRIAL APPLICATION, AMTIA 2016, 2016, : 292 - 300
  • [48] Research on Hot Riveting Quenching Clinching of the High Strength Steel 22MnB5 and Aluminum Alloy 7075
    Zhuang W.
    Zhao W.
    Xie D.
    Li B.
    Xie, Dongxuan (xiedx_jlu@163.com), 2017, Chinese Mechanical Engineering Society (53): : 106 - 112
  • [49] Thermo-Mechanical Constitutive Equation of 22MnB5 Steel Sheet for Hot Press Forming Process
    Ahn, Kwanghyun
    Jeong, Yuhyeong
    Yoon, Jonghun
    INTERNATIONAL JOURNAL OF PRECISION ENGINEERING AND MANUFACTURING, 2019, 20 (04) : 663 - 672
  • [50] Hot Forming and Subsequent Cooling Outside the Press for Adjusted Tailored Properties of 22MnB5 Steel Sheets
    Behrens, Bernd-Arno
    Maier, Hans Juergen
    Nuernberger, Florian
    Schroedter, Jens
    Moritz, Joern
    Wolf, Lars
    Gaebel, Christoph Michael
    HOT SHEET METAL FORMING OF HIGH-PERFORMANCE STEEL CHS2 (5TH INTERNATIONAL CONFERENCE), 2015, (05): : 35 - 42