A measurement method of residual stress in quenched steel by neutron diffracation

被引：4
|
作者：
Ju, DY
Mukai, R
Minakawa, N
Morii, Y
Moriai, A
机构：
[1] Saitama Inst Technol, Grad Sch, Dept Mat Sci & Engn, Okabe, Saitama 3690293, Japan
[2] JSNS, Adv Sci Res Ctr, Tokai, Ibaraki 3191195, Japan
来源：
ADVANCES IN NONDESTRUCTIVE EVALUATION, PT 1-3 | 2004年 / 270-273卷
关键词：
neutron diffraction; residual stresses; quenching; phase transformation; gradient distribution; martensite; carbon steel; finite element analysis;
D O I：
10.4028/www.scientific.net/KEM.270-273.139
中图分类号：
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
An experimental methodology was developed for identification of residual stresses inside quenched steel by neutron diffraction considering gradient distribution of martensite phases. A hybrid method is used by which the residual stress in the quenched steel was measured with neutron diffraction integrated with numerical simulation results of microstructure and phase distribution. A coupled finite element analysis based on metallo-thermo-mechanical theory was carried out to predict the microstructure due to phase transformation during quenching process. The non-strain lattice spacing and elastic modulus were measured with rotating specimen method in tensile test. Then, residual stresses in the (110) plane are measured using the cylinder specimens of quenched S45C and SCr420 steel by the neutron diffraction method. Finally the measured results of XRD, neutron diffraction as well as the calculated values were compared and discussed.
引用
收藏
页码：139 / 146
页数：8
相关论文
共 50 条
  • [41] RESIDUAL STRESS IN GLASS QUENCHED IN LIQUIDS
    VITMAN, FF
    DMITRIEVA, TG
    PUKH, VP
    SOVIET PHYSICS-SOLID STATE, 1963, 4 (08): : 1575 - 1581
  • [42] Residual stress measurement in socket welded joints by neutron diffraction
    Hitachi, Ltd, Hitachi, Japan
    Zairyo, 507 (1464-1469):
  • [43] Residual stress measurement of titanium casting alloy by neutron diffraction
    Nishida, M.
    Jing, T.
    Muslih, M. R.
    Hanabusa, T.
    NEUTRON AND X-RAY SCATTERING IN MATERIALS SCIENCE AND BIOLOGY, 2008, 989 : 101 - +
  • [44] Measurement of radiated aluminum weld residual stress by neutron diffraction
    Wang S.
    Feng Q.
    Wang H.
    Li J.
    Liu Y.
    Hedongli Gongcheng/Nuclear Power Engineering, 2016, 37 (05): : 40 - 42
  • [45] THE ROLE OF RESIDUAL STRESS TO HARDENING AND CRACKING ON QUENCHED AND TEMPERED ARMOR STEEL WELDED JOINTS
    Yurianto
    Suryo, S. H.
    Syaiful
    Umardani, Y.
    Yanuar, P.
    METALURGIJA, 2021, 60 (1-2): : 47 - 50
  • [46] Repeatability of the Contour Method for Residual Stress Measurement
    Hill, M. R.
    Olson, M. D.
    EXPERIMENTAL MECHANICS, 2014, 54 (07) : 1269 - 1277
  • [47] Repeatability of the Contour Method for Residual Stress Measurement
    M. R. Hill
    M. D. Olson
    Experimental Mechanics, 2014, 54 : 1269 - 1277
  • [48] RESIDUAL STRESS CONCENTRATIONS IN A STAINLESS STEEL SLOT-WELD MEASURED BY THE CONTOUR METHOD AND NEUTRON DIFFRACTION
    Bouchard, P. John
    Turski, Mark
    Smith, Mike C.
    PROCEEDINGS OF THE ASME PRESSURE VESSELS AND PIPING CONFERENCE, VOL 6, PTS A AND B, 2010, : 335 - 345
  • [49] Plasticity in the contour method of residual stress measurement
    Traore, Yeli
    Hosseinzadeh, Foroogh
    Bouchard, P. John
    RESIDUAL STRESSES IX, 2014, 996 : 337 - 342
  • [50] RESIDUAL-STRESS MEASUREMENT BY SECTIONING METHOD
    TEBEDGE, N
    ALPSTEN, G
    TALL, L
    EXPERIMENTAL MECHANICS, 1973, 13 (02) : 88 - 96
12345