B4C particle-reinforced al matrix composites production from 7075 al alloy chips by hot pressing

被引：0
|
作者：
Meydanoglu, Onur [1 ]
Mindivan, Hanin [1 ]
Cimenoglu, Huseyin [1 ]
Kayali, E. Sabri [1 ]
机构：
[1] Tech Univ Istanbul, Dept Met & Mat Engn, TR-34469 Maslak, Turkey
来源：
LIGHT METALS 2007 | 2007年
关键词：
B4C; metal matrix composite; wear;
D O I：
暂无
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
In this study, producibilify of B4C particle reinforced Ad alloy matrix composites from 7075 Al alloy machining chips has been investigated. After blending 7075 Al alloy with 10 wt % B4C particles, mixtures were pressed at 350 degrees C for two hours under a pressure of 625 MPa. Characterization of the composites was made by structural examinations and mechanical tests (hardness and dry sliding wear tests). When compared to conventionally extruded 7075 Al alloy, 10 wt.% B4C particles reinforced 7075 aluminum alloy matrix composite exhibited superior hardness and wear resistance especially after T6 tempering.
引用
收藏
页码：1167 / +
页数：2
相关论文
共 50 条
  • [21] Tensile properties of 5052 Al matrix composites reinforced with B4C particles
    Lee, KB
    Sim, HS
    Cho, SY
    Kwon, H
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2001, 32 (08): : 2142 - 2147
  • [22] Tensile properties of 5052 Al Matrix composites reinforced with B4C particles
    Kon Bae Lee
    Ho Seop Sim
    Hoon Kwon
    Hoon Kwon
    Soo Yeon Cho
    Metallurgical and Materials Transactions A, 2001, 32 : 2142 - 2147
  • [23] Enhanced strength and ductility in nanocarbon hybrid reinforced B4C/Al laminated composites fabricated by vacuum hot pressing
    Zhong, Zheng
    Jiang, Xiaosong
    Wang, Xing
    Sun, Hongliang
    Du, Peinan
    Wu, Zixuan
    Yang, Liu
    VACUUM, 2023, 218
  • [24] Microstructural, mechanical and corrosion behaviour of B4C/BN-reinforced Al7075 matrix hybrid composites
    Ramadoss, N.
    Pazhanivel, K.
    Ganeshkumar, A.
    Arivanandhan, M.
    INTERNATIONAL JOURNAL OF METALCASTING, 2023, 17 (01) : 499 - 514
  • [25] Microstructural, mechanical and corrosion behaviour of B4C/BN-reinforced Al7075 matrix hybrid composites
    N. Ramadoss
    K. Pazhanivel
    A. Ganeshkumar
    M. Arivanandhan
    International Journal of Metalcasting, 2023, 17 : 499 - 514
  • [26] Mechanical Characterization of Stir Cast Al-7075/B4C/Graphite Reinforced Hybrid Metal Matrix Composites
    Jayendra, B.
    Sumanth, D.
    Dinesh, G.
    Rao, M. Venkateswara
    MATERIALS TODAY-PROCEEDINGS, 2020, 21 : 1104 - 1110
  • [27] Optimization of Al Matrix Reinforced with B4C Particles
    Mohsen Ostad Shabani
    Ali Mazahery
    JOM, 2013, 65 : 272 - 277
  • [28] Optimization of Al Matrix Reinforced with B4C Particles
    Shabani, Mohsen Ostad
    Mazahery, Ali
    JOM, 2013, 65 (02) : 272 - 277
  • [29] The machinability of Al/B4C composites produced by hot pressing based on reinforcing the element ratio
    Ekici, Ergun
    Gulesin, Mahmut
    SCIENCE AND ENGINEERING OF COMPOSITE MATERIALS, 2016, 23 (06) : 743 - 750
  • [30] EDM investigation of Al 7075 alloy reinforced with B4C and fly ash nanoparticles and parametric optimization for sustainable production
    Sweety Mahanta
    M. Chandrasekaran
    Sutanu Samanta
    R. M. Arunachalam
    Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2018, 40
12345