Study on the Reverse Engineering Design of the Automobile Stamping Part of Using the ATOS Optical Measuring Techniques

被引：0
|
作者：
Gong Hongying [1 ]
Ni Li [1 ]
Sun Yibing [1 ]
Yuan Kai [1 ]
机构：
[1] Shanghai Univ Engn Sci, Dept Mat Proc Engn, Shanghai 201620, Peoples R China
来源：
ISTM/2009: 8TH INTERNATIONAL SYMPOSIUM ON TEST AND MEASUREMENT, VOLS 1-6 | 2009年
关键词：
RE (Reverse Engineering); ATOS; Stamping; Measuring Techniques;
D O I：
暂无
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
With the development of the computer and measuring technology, the reverse engineering design of realization production by the CAD/CAM technology. and the advanced manufacture technology became one of the main development trends in CAD/CAM researching field and the primary content of the application of the reverse engineering technology. In the paper, the whole reverse engineering design processing about a typical automotive stamping part the front beam cover part was researched. The two key techniques of the reverse engineering technology: measuring and post processing were discussed. In particular, how to using the advanced optical measuring techniques by ATOS to measuring and building the 3D model of automobile part was presented at length.
引用
收藏
页码：3057 / 3060
页数：4
相关论文
共 50 条
  • [41] Structural design of stamping die of advanced high-strength steel part for automobile based on topology optimization with variable density method
    Xu, Teng
    Wu, Hongxing
    Xue, Fei
    Guo, Jianwen
    Ran, Jiaqi
    Gong, Feng
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2022, 121 (11-12): : 8115 - 8125
  • [42] Measuring method for abrasive volume of biomimetic embossed surfaces using reverse engineering
    Tong, Jin
    Rong, Baojun
    Yan, Jiulin
    Ma, Yunhai
    Jia, Bingyun
    WEAR, 2008, 265 (7-8) : 1114 - 1120
  • [43] Structural design of stamping die of advanced high-strength steel part for automobile based on topology optimization with variable density method
    Teng Xu
    Hongxing Wu
    Fei Xue
    Jianwen Guo
    Jiaqi Ran
    Feng Gong
    The International Journal of Advanced Manufacturing Technology, 2022, 121 : 8115 - 8125
  • [44] A Case Study of Reverse Engineering Integrated in an Automated Design Process
    Pescaru, R.
    Kyratsis, P.
    Oancea, G.
    20TH INNOVATIVE MANUFACTURING ENGINEERING AND ENERGY CONFERENCE (IMANEE 2016), 2016, 161
  • [45] Dealing with Design Pattern Variants in Reverse Engineering: An Exploratory Study
    De Lucia, Andrea
    Deufemia, Vincenzo
    Gravino, Carmine
    Risi, Michele
    2018 11TH INTERNATIONAL CONFERENCE ON THE QUALITY OF INFORMATION AND COMMUNICATIONS TECHNOLOGY (QUATIC), 2018, : 164 - 167
  • [46] Validation of mechanistic CHF models using optical measuring techniques
    Bloch, G.
    Sattelmayer, T.
    KERNTECHNIK, 2013, 78 (01) : 57 - 59
  • [47] Automatic Reverse Engineering of CAN Bus Data Using Machine Learning Techniques
    Huybrechts, Thomas
    Vanommeslaeghe, Yon
    Blontrock, Dries
    Van Barel, Gregory
    Hellinckx, Peter
    ADVANCES ON P2P, PARALLEL, GRID, CLOUD AND INTERNET COMPUTING (3PGCIC-2017), 2018, 13 : 751 - 761
  • [48] Reverse Engineering and Prevention Techniques for Physical Unclonable Functions Using Side Channels
    Wei, Sheng
    Wendt, James B.
    Nahapetian, Ani
    Potkonjak, Miodrag
    2014 51ST ACM/EDAC/IEEE DESIGN AUTOMATION CONFERENCE (DAC), 2014,
  • [49] Study on Digitized Inspecting Technique for Complex Casting Part Based on Reverse Engineering
    Qu Ligang
    Gu Xiaoyu
    ICIC 2009: SECOND INTERNATIONAL CONFERENCE ON INFORMATION AND COMPUTING SCIENCE, VOL 4, PROCEEDINGS: MODELLING AND SIMULATION IN ENGINEERING, 2009, : 19 - +
  • [50] Reverse Engineering of Chemically Similar Bimodal High Density Polyethylenes: A Comprehensive Study Using Advanced Chromatographic Techniques
    Ndiripo, Anthony
    Lamola, Helen
    Ndlovu, Petronella Zabesuthu
    Lederer, Albena
    Pasch, Harald
    van Reenen, Albert Johannes
    MACROMOLECULAR MATERIALS AND ENGINEERING, 2022, 307 (09)
12345