Study on the Reverse Engineering Design of the Automobile Stamping Part of Using the ATOS Optical Measuring Techniques

被引：0
|
作者：
Gong Hongying [1 ]
Ni Li [1 ]
Sun Yibing [1 ]
Yuan Kai [1 ]
机构：
[1] Shanghai Univ Engn Sci, Dept Mat Proc Engn, Shanghai 201620, Peoples R China
来源：
ISTM/2009: 8TH INTERNATIONAL SYMPOSIUM ON TEST AND MEASUREMENT, VOLS 1-6 | 2009年
关键词：
RE (Reverse Engineering); ATOS; Stamping; Measuring Techniques;
D O I：
暂无
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
With the development of the computer and measuring technology, the reverse engineering design of realization production by the CAD/CAM technology. and the advanced manufacture technology became one of the main development trends in CAD/CAM researching field and the primary content of the application of the reverse engineering technology. In the paper, the whole reverse engineering design processing about a typical automotive stamping part the front beam cover part was researched. The two key techniques of the reverse engineering technology: measuring and post processing were discussed. In particular, how to using the advanced optical measuring techniques by ATOS to measuring and building the 3D model of automobile part was presented at length.
引用
收藏
页码：3057 / 3060
页数：4
相关论文
共 50 条
  • [1] Reverse Engineering Application in Automobile Parts Design
    Yang, Xiaoling
    Zhou, Tianrui
    Wang, Limin
    ADVANCED ENGINEERING MATERIALS, PTS 1-3, 2011, 194-196 : 2216 - 2219
  • [2] Springback compensation for stamping part with complex surface based on reverse engineering
    Wang H.
    Zhou J.
    Xiong Y.
    Tao Y.-P.
    Xiang R.
    Zhou, Jie (zhoujie@cqu.edu.cn), 1842, Editorial Board of Jilin University (47): : 1842 - 1847
  • [3] Reverse Engineering in the Design of a Plastic Part
    Sun, Chunhua
    Wei, Zhu
    Yang, Lili
    ADVANCED MANUFACTURING SYSTEMS, PTS 1-3, 2011, 201-203 : 814 - +
  • [4] Study on the Reasoning Technology of Automobile Stamping Dies Design Based on Knowledge
    Zhang, Huawei
    Chen, Yuquan
    Zhang, Fanliang
    Sun, Yanbing
    Shi, Guohui
    CJCM: 5TH CHINA-JAPAN CONFERENCE ON MECHATRONICS 2008, 2008, : 263 - 266
  • [5] Part design and evaluation through reverse engineering approach
    Ali, Fahraz
    Chowdary, Boppana V.
    Imbert, C.A.C.
    International Journal of Agile Manufacturing, 2009, 11 (01): : 73 - 82
  • [6] High-speed optical measuring boosts reverse engineering
    不详
    PROFESSIONAL ENGINEERING, 1997, 10 (09) : 32 - 32
  • [7] Automobile Panel Reverse Engineering Design Based on NURBS Surface Reconstruction Technique
    Zhang, Hongyuan
    He, Peng
    MEASURING TECHNOLOGY AND MECHATRONICS AUTOMATION IV, PTS 1 AND 2, 2012, 128-129 : 1341 - +
  • [8] Reverse Engineering of Geometric Models of Advanced Curved Edge Drills Using Optical Measuring Systems
    Pivkin, Petr M.
    Grechishnikov, Vladimir A.
    Ershov, Artem A.
    Volosova, Marina A.
    Nadykto, Alexsey B.
    TECHNOLOGIES FOR OPTICAL COUNTERMEASURES XVIII AND HIGH-POWER LASERS: TECHNOLOGY AND SYSTEMS, PLATFORMS, EFFECTS V, 2021, 11867
  • [9] APPLICATION OF REVERSE ENGINEERING TECHNOLOGY IN PART DESIGN FOR SHIPBUILDING INDUSTRY
    Deja, Mariusz
    Dobrzynski, Michal
    Rymkiewicz, Marcin
    POLISH MARITIME RESEARCH, 2019, 26 (02) : 126 - 133
  • [10] A comparative study of stamping and hydroforming processes for an automobile fuel tank using FEM
    Kang, BS
    Son, BM
    Kim, J
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2004, 44 (01): : 87 - 94
12345