Preparation and sintering of nano-sized W-Ni-Fe powder by sol-spray-drying process

被引：8
|
作者：
Fan, Jinglian [1 ]
Liu, Tao [1 ]
Ma, Yunzhu [1 ]
Cheng, Huichao [1 ]
机构：
[1] Cent S Univ, State Key Lab Powder Met, Changsha 410083, Peoples R China
来源：
PROGRESS IN POWDER METALLURGY, PTS 1 AND 2 | 2007年 / 534-536卷
关键词：
nano-structured powder; tungsten heavy alloy; sol-spray drying;
D O I：
10.4028/www.scientific.net/MSF.534-536.1409
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In this paper, less than 50nm nano-sized W-Ni-Fe composite powder was prepared by Sol-Spray-Drying Process. The preparing processes such as sol formation condition, reduction process of the procusor were studied in detail. The powder characteristics and sintering behavior of the powders were also studied. The powder is nearly spherical and it has good sinterability. In comparison with traditional micron mixed powder consisting of same composition, the melting temperature of the second phase lowered about 70 degrees C, and the sintering temperature for nearly full densification was about 1390 degrees C, which lowered more than 100 degrees C. The effects of rare earth on sintering of the alloy were discussed.
引用
收藏
页码：1409 / +
页数：2
相关论文
共 50 条
  • [21] Application of Spray Pyrolysis Process for the Preparation of Nano Sized Cobalt Oxide Powder
    Kim, Dong Hee
    Seo, Dong Jun
    Yu, Jae Keun
    KOREAN JOURNAL OF MATERIALS RESEARCH, 2014, 24 (01): : 25 - 32
  • [22] Research on the preparation and shielding properties of W-Ni-Fe alloy material by liquid phase sintering
    Tang Dewen
    Zou Shuliang
    Yan Liang
    POWDER METALLURGY, 2018, 61 (01) : 28 - 35
  • [23] Fabrication of nano-sized ITO powder from waste ITO target by spray pyrolysis process
    Yu, Jae-Keun
    Kang, Seong-Gu
    Jung, Ki-Chang
    Han, Joung-Su
    Kim, Dong-Hee
    MATERIALS TRANSACTIONS, 2007, 48 (02) : 249 - 257
  • [24] Effects of Air Pressure on the Fabrication of Nano-Sized Tin Oxide Powder by Spray Pyrolysis Process
    Yu, Jaekeun
    Kim, Donghee
    KOREAN JOURNAL OF MATERIALS RESEARCH, 2011, 21 (12): : 690 - 696
  • [25] Preparation of complex nano-sized powder via spraying pyrogenation process and its properties
    Min, Z
    ISTM/2005: 6TH INTERNATIONAL SYMPOSIUM ON TEST AND MEASUREMENT, VOLS 1-9, CONFERENCE PROCEEDINGS, 2005, : 2172 - 2175
  • [26] Two-stage sintering of nano-sized yttria stabilized zirconia process by powder injection moulding
    Yu, P. C.
    Li, Q. F.
    Fuh, J. Y. H.
    Li, T.
    Lu, L.
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2007, 192 : 312 - 318
  • [27] Sintering densification behavior and kinetic mechanism of nano-tungsten powder prepared by sol-spray drying
    Zhi-Yuan Du
    Yong-Qi Lv
    Yong Han
    Jing-Lian Fan
    Lei Ye
    Tungsten, 2020, 2 : 371 - 380
  • [28] Effect of Nozzle Tip Size on the Fabrication of Nano-Sized Nickel Oxide Powder by Spray Pyrolysis Process
    Kim, Donghee
    Yu, Jaekeun
    KOREAN JOURNAL OF MATERIALS RESEARCH, 2013, 23 (09): : 489 - 494
  • [29] Fabrication of nano-sized indiurn oxide powder below 50nm by spray pyrolysis process
    Yu, Jaekeun
    Kang, Seonggu
    Han, Jeongsu
    Ahn, Zousam
    ADVANCES IN NANOMATERIALS AND PROCESSING, PTS 1 AND 2, 2007, 124-126 : 1217 - +
  • [30] The Effects of Reaction Factors on the Fabrication of Nano-Sized Indium Tin Oxide Powder by Spray Pyrolysis Process
    Yu, Jaekeun
    Kim, Donghee
    JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 2012, 12 (02) : 1545 - 1550
12345