Fabrication of porous bovine pericardium scaffolds incorporated with bFGF for tissue engineering applications

被引:5
|
作者
Liu, Xiaohong [1 ]
Wu, Hao [1 ]
Lu, Fanglin [1 ]
Li, Qin [1 ]
Xu, Zhiyun [1 ]
机构
[1] Second Mil Med Univ, Changhai Hosp, Dept Cardiovasc Surg, 168 Changhai Rd, Shanghai 200433, Peoples R China
关键词
basic fibroblast growth factor; bioactive factor delivery; cell ingrowth; porous bovine pericardium; tissue engineering;
D O I
10.1111/xen.12568
中图分类号
R-3 [医学研究方法]; R3 [基础医学];
学科分类号
1001 ;
摘要
Background The design and fabrication of porous scaffolds are important issues for tissue engineering applications. In this study, we attempted to fabricate porous scaffolds using bovine pericardium (BP) and examined whether these scaffolds were beneficial for cell ingrowth and bioactive factors delivery. Methods A vacuum-freeze-thawing-Triton X-100 (VFTT) protocol was used to fabricate porous BP scaffolds. The porous and mechanical properties were assessed using histology, scanning electron microscopy, and mechanical assay. The fabricated scaffolds were seeded with mesenchymal stem cells (MSCs), and cell ingrowth was evaluated. Basic fibroblast growth factor (bFGF) was subsequently incorporated into the fabricated scaffolds. The bioactive factor delivery capacity was evaluated using loading and release studies. The bioactivity of released bFGF was assessed using a rat subcutaneous model. Results The BP scaffolds fabricated by the VFTT protocol displayed interconnected porous structures with porosity of 6.82 +/- 1.36%.There were no significant differences in thickness, ultimate load, Young's modulus, and ultimate tensile strength between the fabricated porous BP scaffolds and native BPs (all P > .05). However, the water content of BPs was slightly reduced after VFTT treatment (P < .05). Cell ingrowth analysis showed that the seeded MSCs penetrated into the porous BP scaffolds with time of culture, while MSCs were limited to the surface layers of native BPs. Furthermore, bFGF was observed to be effectively loaded onto and released from the porous BP scaffolds. The released bFGF increased the phosphorylation levels of Akt, ERK 1/2, and MEK1/2, promoted host MSC recruitment, and inhibited myofibroblast differentiation in vivo. Conclusions The porous BP scaffolds fabricated using a VFTT protocol were promising natural scaffolds for tissue engineering applications, since they had considerable mechanical properties as native BPs, supplied porous channels for cell ingrowth, and possessed bioactive factors delivery capability.
引用
收藏
页数:10
相关论文
共 50 条
  • [21] Fabrication and characterization of hydrothermal cross-linked chitosan porous scaffolds for cartilage tissue engineering applications
    Shamekhi, Mohammad Amin
    Rabiee, Ahmad
    Mirzadeh, Hamid
    Mandavi, Hamid
    Mohebbi-Kalhori, Davod
    Eslaminejad, Mohamadreza Baghaban
    MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS, 2017, 80 : 532 - 542
  • [22] Fabrication and evaluation of porous and conductive nanofibrous scaffolds for nerve tissue engineering
    Pooshidani, Yasaman
    Zoghi, Nastaran
    Rajabi, Mina
    Haghbin Nazarpak, Masoumeh
    Hassannejad, Zahra
    JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE, 2021, 32 (04)
  • [23] Fabrication and Evaluation of Porous dECM/PCL Scaffolds for Bone Tissue Engineering
    Wang, Weiwei
    Zhou, Xiaqing
    Yin, Zhuozhuo
    Yu, Xiaojun
    JOURNAL OF FUNCTIONAL BIOMATERIALS, 2023, 14 (07)
  • [24] Recent Development in the Fabrication of Collagen Scaffolds for Tissue Engineering Applications: A Review
    Busra, Mohammad F. Mh
    Lokanathan, Yogeswaran
    CURRENT PHARMACEUTICAL BIOTECHNOLOGY, 2019, 20 (12) : 992 - 1003
  • [25] Fabrication and Characterization of Tough Elastomeric Fibrous Scaffolds for Tissue Engineering Applications
    Sant, Shilpa
    Khademhosseini, Ali
    2010 ANNUAL INTERNATIONAL CONFERENCE OF THE IEEE ENGINEERING IN MEDICINE AND BIOLOGY SOCIETY (EMBC), 2010, : 3546 - 3548
  • [26] Hydrothermal fabrication of hydroxyapatite/chitosan/carbon porous scaffolds for bone tissue engineering
    Long, Teng
    Liu, Yu-Tai
    Tang, Sha
    Sun, Jin-Liang
    Guo, Ya-Ping
    Zhu, Zhen-An
    JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS, 2014, 102 (08) : 1740 - 1748
  • [27] Design, Fabrication, and Characterization of Novel Porous Conductive Scaffolds for Nerve Tissue Engineering
    Baniasadi, Hossein
    Ramazani, Ahmad S. A.
    Mashayekhan, Shohreh
    Farani, Marzieh Ramezani
    Ghaderinezhad, Fariba
    Dabaghi, Mohammadhossein
    INTERNATIONAL JOURNAL OF POLYMERIC MATERIALS AND POLYMERIC BIOMATERIALS, 2015, 64 (18) : 969 - 977
  • [28] Functionalized Porous Hydroxyapatite Scaffolds for Tissue Engineering Applications: A Focused Review
    Bhat, Shrinath
    Uthappa, U. T.
    Altalhi, Tariq
    Jung, Ho-Young
    Kurkuri, Mahaveer D.
    ACS BIOMATERIALS SCIENCE & ENGINEERING, 2022, 8 (10) : 4039 - 4076
  • [29] APPLICATIONS OF CALCIUM PHOSPHATE NANOPARTICLES IN POROUS HARD TISSUE ENGINEERING SCAFFOLDS
    Wang, Zhe
    Tang, Zhurong
    Qing, Fangzhu
    Hong, Youliang
    Zhang, Xingdong
    NANO, 2012, 7 (04)
  • [30] Toward the fabrication of hierarchically-structured porous polymers for tissue engineering scaffolds
    Wang, Hai
    Li, Wei
    Manufacturing Engineering and Materials Handling, 2005 Pts A and B, 2005, 16 : 143 - 150