Photochromic Microcapsules for Textile Materials by Spray Drying: Part 2-Exergy Analysis of Spray Drying Process

被引：3

作者：

Cay, Ahmet ^{[1
]}

Morsumbul, Seniha ^{[1
]}

Kumbasar, Emriye Perrin Akcakoca ^{[1
]}

机构：

[1] Ege Univ, Fac Engn, Dept Text Engn, Bornova, Turkey

来源：

AATCC JOURNAL OF RESEARCH | 2022年 / 9卷 / 01期

关键词：

Exergy Analysis; Exergy Efficiency; Microencapsulation; Photochromic Dye; Spray Drying; EXERGETIC PERFORMANCE; HEAT-RECOVERY; ENERGY; OPTIMIZATION; DRYER;

D O I：

10.1177/23305517211060794

中图分类号：

TB3 [工程材料学]; TS1 [纺织工业、染整工业];

学科分类号：

0805 ; 080502 ; 0821 ;

摘要：

In this study, the second part of a three-part series, exergy analysis of microencapsulation of photochromic dyes by the spray drying method was investigated. Since the spray dryers are thermal systems, energetic examination of the system components is an important issue for sustainable production with high efficiency. Exergy analysis is an important tool used in recent years for the analysis, design, and performance evaluation of thermal systems. The spray drying process was investigated considering two subsystems: the heater and the dryer sections. An exergy model for the process of encapsulation of spirooxazine-based photochromic dye with ethyl cellulose by the spray drying method was proposed. The highest exergy efficiency was achieved at a drying temperature of 120 degrees C and using an aqueous system as the solvent.

引用

页码：3 / 11

页数：9

共 50 条

[21] Optimization of cocurrent spray drying process for sugar-rich foods. Part II - Optimization of spray drying process based on glass transition concept
Truong, V
Bhandari, BR
Howes, T
JOURNAL OF FOOD ENGINEERING, 2005, 71 (01) : 66 - 72
[22] Mechanism of flame spray drying process: experimental and CFD analysis
Sobulska, Mariia
Zbicinski, Ireneusz
Piatkowski, Marcin
DRYING TECHNOLOGY, 2020, 38 (1-2) : 80 - 92
[23] Process analysis and global optimization for the microencapsulation of phytosterols by spray drying
Agustina Di Battista, Carla
Constenla, Diana
Ramirez Rigo, Maria Veronica
Pina, Juliana
POWDER TECHNOLOGY, 2017, 321 : 55 - 65
[24] Analysis of Gas Admixing Foam Spray-Drying Process
Zbicinski, Ireneusz
Rabaeva, Julia
DRYING TECHNOLOGY, 2010, 28 (01) : 103 - 110
[25] Viscosity analysis in milk quality identification and spray drying process
1600, (11):
[26] INVESTIGATION OF SPRAY DRYING FOR PRODUCTION OF MICROWAVE MATERIALS
BOMAR, SH
LOGAN, KV
AMERICAN CERAMIC SOCIETY BULLETIN, 1971, 50 (04): : 389 - &
[27] Simulation of Drying of Particulate Suspensions in Spray-Drying Granulation Process
Nishiura, Daisuke
Shimosaka, Atsuko
Shirakawa, Yoshiyuki
Hidaka, Jusuke
JOURNAL OF CHEMICAL ENGINEERING OF JAPAN, 2010, 43 (08) : 641 - 649
[28] Spray-freeze-drying: A novel process for the drying of foods and bioproducts
Ishwarya, S. Padma
Anandharamakrishnan, C.
Stapley, Andrew G. F.
TRENDS IN FOOD SCIENCE & TECHNOLOGY, 2015, 41 (02) : 161 - 181
[29] Optimizing Analysis for Spray-Drying
Sasakura, Daisuke
Sato, Fumiaki
Kato, Hayato
Kawaguci, Shinya
Misumi, Yuichi
CHEMICAL ENGINEERING, 2017, 124 (04) : 43 - 48
[30] Process optimization of spray drying of beetroot Juice
Bhupinder Singh
Bahadur Singh Hathan
Journal of Food Science and Technology, 2017, 54 : 2241 - 2250

← 1 2 3 4 5 →