Experimental Characterization of Tool Heating During Friction Stir Welding

被引：0
|
作者：
Covington, J. L. [1 ]
Robison, W. [1 ]
Webb, B. W. [1 ]
机构：
[1] Brigham Young Univ, Dept Mech Engn, Provo, UT 84602 USA
来源：
TRENDS IN WELDING RESEARCH, PROCEEDINGS | 2006年
关键词：
friction stir welding; tool heat transfer;
D O I：
暂无
中图分类号：
TF [冶金工业];
学科分类号：
0806 ;
摘要：
The heat input to the tool has been characterized at a variety of operating parameters for bead-on-plate friction stir welding (FSW) of AL 7075-T7351. In a statistical Design of Experiments (DOE) fashion, 54 welds were performed at 27 parameter combinations. During each of the welds the heat flow through the tool was calculated based on infrared imaging temperature measurements. The percentage of the total mechanical power required for FSW that enters the tool was also determined. For the range of operating parameters and the tool used, the heat input to the tool ranged from 155 W to 200 W, comprising 2.8% to 5.1% of the total mechanical power. Regression equations developed for the two values show that each is a function of the process operating parameters.
引用
收藏
页码：179 / 184
页数：6
相关论文
共 50 条
  • [41] Numerical studies on fatigue of tool in friction stir welding
    Shenyang Aerospace University, Liaoning General Aviation Academy, Shenyang
    Liaoning
    110136, China
    Beijing Ligong Daxue Xuebao, 7 (677-681):
  • [42] Bending vibrational tool for friction stir welding process
    Amini, Saeid
    Nazari, M. Mohammad
    Rezaei, A.
    International Journal of Advanced Manufacturing Technology, 2016, 84 (9-12): : 1889 - 1896
  • [43] Effect of friction stir welding tool design on welding thermal efficiency
    Li, Hongjun
    Gao, Jian
    Li, Qinchuan
    Galloway, Alexander
    Toumpis, Athanasios
    SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2019, 24 (02) : 156 - 162
  • [44] Tool Quality Monitoring in Friction Stir Welding Process
    Mishra, Debasish
    Roy, Rohan Basu
    Pal, Surjya K.
    Chakravarty, Debashish
    MACHINES, MECHANISM AND ROBOTICS, INACOMM 2019, 2022, : 519 - 530
  • [45] Bending vibrational tool for friction stir welding process
    Amini, Saeid
    Nazari, M. Mohammad
    Rezaei, A.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2016, 84 (9-12): : 1889 - 1896
  • [46] Bending vibrational tool for friction stir welding process
    Saeid Amini
    M. Mohammad Nazari
    A. Rezaei
    The International Journal of Advanced Manufacturing Technology, 2016, 84 : 1889 - 1896
  • [47] Temperature Distribution within the Friction Stir Welding Tool
    S. Yu. Mironov
    Physical Mesomechanics, 2023, 26 : 33 - 38
  • [48] Appraising Tool Wear during Secondary Heating Assisted Dissimilar Friction Stir Welding between 6061 and 7075 Aluminium Alloys
    Raturi, Madhav
    Bhattacharya, Anirban
    MATERIALS TRANSACTIONS, 2023, 64 (02) : 485 - 491
  • [49] Characterization of the Influence of Tool Pin Profile on Microstructural and Mechanical Properties of Friction Stir Welding
    Marzbanrad, Javad
    Akbari, Mostafa
    Asadi, Parviz
    Safaee, Samad
    METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2014, 45 (05): : 1887 - 1894
  • [50] CONTROL OF MATERIAL FLOW DURING FRICTION STIR WELDING BETWEEN ALUMINUM AND STEEL BY WELDING TOOL SHAPE
    Yasui, Toshiaki
    Ogura, Yuki
    Huilin, Xu
    Najwa, F. Farrah
    Sugimoto, Daichi
    Ito, Atsushi
    Fukumoto, Masahiro
    PROCEEDINGS OF THE JSME 2020 CONFERENCE ON LEADING EDGE MANUFACTURING/MATERIALS AND PROCESSING, LEMP2020, 2020,
12345