3D Numerical Simulation of Kuroshio-induced Wake Near Green Island, Taiwan

被引:0
|
作者
Hou, Tien-Hung [1 ]
Chang, Jen-Yi [2 ]
Tsai, Chia-Cheng [1 ,3 ,4 ]
Hsu, Tai-Wen [4 ]
机构
[1] Natl Kaohsiung Univ Sci & Technol, Dept Marine Environm Engn, Kaohsiung, Taiwan
[2] Tainan Univ Technol, Tainan, Taiwan
[3] Natl Sun Yat Sen Univ, Dept Marine Environm & Engn, Kaohsiung, Taiwan
[4] Natl Taiwan Ocean Univ, Ctr Excellence Ocean Engn, Keelung, Taiwan
来源
关键词
Ocean modeling; Green Island wake; 3D realistic model; Wind stress; INITIALIZATION; MODELS; SITE;
D O I
10.51400/2709-6998.1436
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
In this research, Kuroshio-induced vortex shedding in the lee of Green Island was numerically studied using the three-dimensional Princeton Ocean Model. The temporal and spatial characteristics of the vortex street were analyzed at different tidal levels, wind fields and water depths. The numerical results were validated by comparing with in-situ measurements from the Green Island tidal station, shipboard acoustic doppler current profiler (ADCP), conductivity-temperature-depth (CTD) profiler, and moderate resolution imaging spectroradiometer (MODIS) satellite image datasets. Also, the three-dimensional results of velocity, temperature, and salinity fields were compared well with observational data. Furthermore, the influence depths of the wind effect and vortex shedding were found to be approximately 100 and 300 m, respectively. The aspect ratio and dimensionless width were evaluated to be 3.64 and 1.46, respectively. In addition, the temporal scales (Strouhal numbers), and propagation speeds were analyzed at various water depths. Finally, the elongation of the Kuroshio-induced vortex street was studied under wind and tide effects at various water depths.
引用
收藏
页码:313 / 324
页数:12
相关论文
共 50 条
  • [31] Liquefaction-induced settlement of shallow foundations and remediation: 3D numerical simulation
    Elgamal, A
    Lu, JC
    Yang, ZH
    JOURNAL OF EARTHQUAKE ENGINEERING, 2005, 9 : 17 - 45
  • [32] 3D numerical simulation of compressible swirling flow induced by means of tangential inlets
    Guo, Hui-Fen
    Chen, Zhi-Yong
    Yu, Chong-Wen
    INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN FLUIDS, 2009, 59 (11) : 1285 - 1298
  • [33] Numerical Simulation of 3D Printing of Infrastructure Materials
    Ramyar, E.
    Xinwei, Z.
    Cusatis, G.
    EARTH AND SPACE 2021: SPACE EXPLORATION, UTILIZATION, ENGINEERING, AND CONSTRUCTION IN EXTREME ENVIRONMENTS, 2021, : 1242 - 1250
  • [34] 3D numerical simulation of the airflow in a Pneumatic Splicer
    Xing, Xiao
    Ye, Guoming
    MECHANICAL AND ELECTRONICS ENGINEERING III, PTS 1-5, 2012, 130-134 : 2345 - 2348
  • [35] Numerical simulation of 3D supersonic inlet flows
    van Keuk, J
    Ballmann, J
    ZEITSCHRIFT FUR ANGEWANDTE MATHEMATIK UND MECHANIK, 2000, 80 : S645 - S646
  • [36] Numerical Simulation for 3D Atmospheric Turbulence Field
    Gao, Jing
    Hong, Guanxin
    PROCEEDINGS OF 2016 7TH INTERNATIONAL CONFERENCE ON MECHANICAL AND AEROSPACE ENGINEERING, (ICMAE), 2016, : 304 - 308
  • [37] 3D material microstructures design and numerical simulation
    Ren Huai-Hui
    Li Xu-Dong
    ACTA PHYSICA SINICA, 2009, 58 (06) : 4041 - 4052
  • [38] Numerical simulation of 3D dynamic garment pressure
    Zhang, X
    Yeung, KW
    Li, Y
    TEXTILE RESEARCH JOURNAL, 2002, 72 (03) : 245 - 252
  • [39] 3D numerical simulation of the deformation of glassy polymer
    Jin, Y. J.
    Wang, T. J.
    ADVANCES IN FRACTURE AND MATERIALS BEHAVIOR, PTS 1 AND 2, 2008, 33-37 : 573 - 578
  • [40] A 3D numerical simulation to study the system of gyrotron
    Xia Meng-Zhong
    Liu Da-Gang
    Yan Yang
    Peng Kai
    Yang Chao
    Liu La-Oun
    Wang Hui-Hui
    ACTA PHYSICA SINICA, 2013, 62 (11)