Optimization of internal thread structure of force sensor considering fatigue performance

被引：0
|
作者：
Sun, Hongchun [1 ]
Wang, Tianlu [1 ]
Zhang, Xindong [2 ]
机构：
[1] Northeastern Univ, Sch Mech Engn & Automat, Shenyang, Liaoning, Peoples R China
[2] Shanghai Aerosp Syst Engn Inst, Shanghai, Peoples R China
来源：
SENSOR REVIEW | 2019年 / 39卷 / 06期
基金：
中国国家自然科学基金;
关键词：
Elastomer; Fatigue life; Fatigue performance; Thread structure; Force sensor; DESIGN;
D O I：
10.1108/SR-05-2019-0137
中图分类号：
TH7 [仪器、仪表];
学科分类号：
0804 ; 080401 ; 081102 ;
摘要：
Purpose Fatigue damage of internal threads has gradually become the main failure mode of force sensor. To make the internal thread structure of force sensor meet the fatigue performance requirements, the design criteria of static strength and fatigue life are comprehensively considered in this paper. Design/methodology/approach The variation of static stress and fatigue life with the size of the main structure is obtained by simulation. By changing the number of thread turns, the hub height and outer diameter of the hub, the optimized design of the spoke force sensor is determined. Findings The experiment was carried out based on the determined optimized structure, and the results showed that the fatigue life meets the design requirements. Originality/value This research has certain guiding significance for the design and developments of high-cycle fatigue force sensors.
引用
收藏
页码：835 / 843
页数：9
相关论文
共 50 条
  • [21] TOPOLOGY OPTIMIZATION OF PIEZOELECTRIC FORCE SENSOR
    Zheng, Bin
    Lu, Cong
    Huang, Hong-Zhong
    2008 INTERNATIONAL CONFERENCE ON APPERCEIVING COMPUTING AND INTELLIGENCE ANALYSIS (ICACIA 2008), 2008, : 132 - 136
  • [22] Dynamic thread assignment in web server performance optimization
    van der Weij, Wemke
    Bhulai, Sandjai
    van der Mei, Rob
    PERFORMANCE EVALUATION, 2009, 66 (06) : 301 - 310
  • [23] Numerical Simulation and Process Optimization of Internal Thread Cold Extrusion Process
    Hou, Hong-Ling
    Zhang, Guang-Peng
    Xin, Chen
    Zhao, Yong-Qiang
    MATERIALS, 2020, 13 (18)
  • [24] Predictive modeling of grinding force in the inner thread grinding considering the effect of grains overlapping
    Cui Fang
    Congbin Yang
    Ligang Cai
    Yongsheng Zhao
    Zhifeng Liu
    The International Journal of Advanced Manufacturing Technology, 2019, 104 : 943 - 956
  • [25] Fatigue performance and parameter optimization of CFRP-reinforced steel plate considering elevated temperature
    Li, You
    Li, Hongyi
    Ou, Zhihua
    Ma, Xiaowan
    Zhu, Ziming
    Song, Chengjun
    MECHANICS OF ADVANCED MATERIALS AND STRUCTURES, 2024, 31 (28) : 10827 - 10838
  • [26] Predictive modeling of grinding force in the inner thread grinding considering the effect of grains overlapping
    Fang, Cui
    Yang, Congbin
    Cai, Ligang
    Zhao, Yongsheng
    Liu, Zhifeng
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2019, 104 (1-4): : 943 - 956
  • [27] Structure Optimization Design for 1000kV UHV Shield Ring Considering Fatigue Fracture
    Jiang, Lan
    Zhang, Yujiao
    Yang, Qi
    Zhi, Li
    Pu, Ziheng
    2017 20TH INTERNATIONAL CONFERENCE ON ELECTRICAL MACHINES AND SYSTEMS (ICEMS), 2017,
  • [28] Hybrid Motion/Force Control of Biped Robots Considering Force Optimization
    Ge, Yongyong
    Wang, Liyang
    Li, Zhijun
    2015 IEEE INTERNATIONAL CONFERENCE ON CYBER TECHNOLOGY IN AUTOMATION, CONTROL, AND INTELLIGENT SYSTEMS (CYBER), 2015, : 520 - 524
  • [29] Internal flow structure, fault detection, and performance optimization of centrifugal pumps
    Tong, Zhe-ming
    Xin, Jia-ge
    Tong, Shui-guang
    Yang, Zhong-qin
    Zhao, Jian-yun
    Mao, Jun-hua
    JOURNAL OF ZHEJIANG UNIVERSITY-SCIENCE A, 2020, 21 (02): : 85 - 117
  • [30] Performance Analysis and Restrictor Structure Improvement of an Internal Feedback Hydrostatic Turntable Oil Pad Considering Internal Flow
    Yang, Congbin
    Shao, Shuaihua
    Li, Ying
    Liu, Zhifeng
    Zhao, Yongsheng
    Ma, Honglie
    ADVANCED THEORY AND SIMULATIONS, 2024, 7 (03)
12345