Effect of CNTs addition on the erosive wear response of epoxy resin and carbon fibre composites

被引：50
|
作者：
Papadopoulos, A. [1 ]
Gkikas, G. [1 ]
Paipetis, A. S. [1 ]
Barkoula, N. -M. [1 ]
机构：
[1] Univ Ioannina, Dept Mat Sci & Engn, GR-45110 Ioannina, Greece
来源：
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING | 2016年 / 84卷
关键词：
Nanocomposites; Hybrid; Carbon nanotubes; Wear; SOLID PARTICLE EROSION; REINFORCED COMPOSITES; POLYMER COMPOSITES; TRIBOLOGICAL PROPERTIES; NANOTUBE; BEHAVIOR; DAMAGE; NANOCOMPOSITES; RESISTANCE; PERFORMANCE;
D O I：
10.1016/j.compositesa.2016.02.012
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In the current study we investigated the effect of carbon nanotubes (CNTs) addition on the erosive wear response of epoxy resin and carbon fibre reinforced laminates (CFRPs) and demonstrated the positive synergy of CNTs and carbon fibres, which resulted in almost 50% decrease of the erosion rate (ER) of the CFRPs at high impact angles (90). Incorporation of CNTs led in slight increase of the ER of the epoxy systems, especially at low impact angles. The relative fibre orientation in the CFRPs had a negligible effect on the erosive wear response mainly due to the quasi isotropic nature of the tested CFRPs. Based on the erosion efficiency parameter the response of the epoxy systems was characterised as semi-brittle, while CFRPs behaved in a brittle manner. Scanning electron micrograph provided evidence that the presence of CNTs reduced the amount of broken and/or detached fibres in the case of CFRPs. (C) 2016 Elsevier Ltd. All rights reserved.
引用
收藏
页码：299 / 307
页数：9
相关论文
共 50 条
  • [41] Friction and Wear Behaviors of Surface-Modified Carbon Fabric/Epoxy Resin Composites
    Xue, Feng
    Su, Chao
    Li, TongSheng
    JOURNAL OF MACROMOLECULAR SCIENCE PART B-PHYSICS, 2019, 58 (05): : 551 - 567
  • [42] Carbon nanotube-reinforced carbon fibre-epoxy composites manufactured by resin film infusion
    Yourdkhani, Mostafa
    Liu, Wenjiao
    Baril-Gosselin, Simon
    Robitaille, Francois
    Hubert, Pascal
    COMPOSITES SCIENCE AND TECHNOLOGY, 2018, 166 : 169 - 175
  • [43] Erosive Wear of Structured Carbon-Fibre-Reinforced Textile Polymer Composites under Sands Blasting
    Deng, Tong
    Garg, Vivek
    Bradley, Michael S. A.
    LUBRICANTS, 2024, 12 (03)
  • [44] Erosive wear of unidirectional carbon fibre reinforced polyetherimide composite
    Arjula, Suresh
    Harsha, A. P.
    Ghosh, M. K.
    MATERIALS LETTERS, 2008, 62 (17-18) : 3246 - 3249
  • [45] NANO-RUBBER TOUGHENING IN EPOXY AND EPOXY/CARBON FIBRE COMPOSITES: TEMPERATURE EFFECT
    Xu, F.
    Liu, H-Y
    Wang, R.
    Huang, Y.
    Guo, W. G.
    Mai, Y-W
    20TH INTERNATIONAL CONFERENCE ON COMPOSITE MATERIALS, 2015,
  • [46] Influence of phenolic resin surface treatment agent on interfacial adhesion of carbon fibre reinforced epoxy resin composites
    Wang, Chao
    Wang, Jing
    Niu, Yongan
    ADVANCED COMPOSITES LETTERS, 2007, 16 (06) : 237 - 241
  • [47] Effect of seawater aging on the erosive wear response of aramid fiber reinforced composites
    Eslava-Hernandez, Abel
    Rodriguez-Gonzalez, Julio A.
    Rubio-Gonzalez, Carlos
    Martinez-Perez, Armando, I
    Vera-Cardenas, Edgar E.
    JOURNAL OF COMPOSITE MATERIALS, 2024, 58 (09) : 1167 - 1178
  • [48] Heterogeneous Surface Wear Models for the Prediction of the Specific Wear Rate of Woven Carbon Fibre Reinforced Epoxy Composites
    Cheng, B.
    Kortschot, M.
    POLYMERS & POLYMER COMPOSITES, 2015, 23 (06): : 359 - 367
  • [49] Investigation on the erosive wear behavior of SiC-modified epoxy composites
    Xia, YF
    Huang, ZH
    Pan, W
    Qi, LH
    Miao, HZ
    RARE METAL MATERIALS AND ENGINEERING, 2005, 34 : 536 - 539
  • [50] Erosive wear studies of epoxy-based composites at normal incidence
    Harsha, A. P.
    Jha, Sanjeev Kumar
    WEAR, 2008, 265 (7-8) : 1129 - 1135
12345