Effect of CNTs addition on the erosive wear response of epoxy resin and carbon fibre composites

被引：50
|
作者：
Papadopoulos, A. [1 ]
Gkikas, G. [1 ]
Paipetis, A. S. [1 ]
Barkoula, N. -M. [1 ]
机构：
[1] Univ Ioannina, Dept Mat Sci & Engn, GR-45110 Ioannina, Greece
来源：
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING | 2016年 / 84卷
关键词：
Nanocomposites; Hybrid; Carbon nanotubes; Wear; SOLID PARTICLE EROSION; REINFORCED COMPOSITES; POLYMER COMPOSITES; TRIBOLOGICAL PROPERTIES; NANOTUBE; BEHAVIOR; DAMAGE; NANOCOMPOSITES; RESISTANCE; PERFORMANCE;
D O I：
10.1016/j.compositesa.2016.02.012
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In the current study we investigated the effect of carbon nanotubes (CNTs) addition on the erosive wear response of epoxy resin and carbon fibre reinforced laminates (CFRPs) and demonstrated the positive synergy of CNTs and carbon fibres, which resulted in almost 50% decrease of the erosion rate (ER) of the CFRPs at high impact angles (90). Incorporation of CNTs led in slight increase of the ER of the epoxy systems, especially at low impact angles. The relative fibre orientation in the CFRPs had a negligible effect on the erosive wear response mainly due to the quasi isotropic nature of the tested CFRPs. Based on the erosion efficiency parameter the response of the epoxy systems was characterised as semi-brittle, while CFRPs behaved in a brittle manner. Scanning electron micrograph provided evidence that the presence of CNTs reduced the amount of broken and/or detached fibres in the case of CFRPs. (C) 2016 Elsevier Ltd. All rights reserved.
引用
收藏
页码：299 / 307
页数：9
相关论文
共 50 条
  • [1] Interphase characterization in epoxy resin/carbon fibre composites
    Bogoeva-Gaceva, G.
    Mader, E.
    Sahre, K.
    Composite Interfaces, 1996, 4 (03): : 143 - 156
  • [2] Fabrication and Properties of Carbon Fibre - Basalt Fibre/Epoxy Resin Composites
    Jin, Hai-yun
    Feng, Da-wei
    Li, Wen-zhao
    Ren, Hong-guang
    Su, Ying
    He, Bo
    Zhou, Ze
    Peng, Zong-ren
    Wang, Chuan-Bin
    ECO-MATERIALS PROCESSING AND DESIGN XII, 2011, 695 : 501 - +
  • [3] The Electrical Properties of Epoxy Resin Composites Filled with Cnts and Carbon Black
    Bellucci, S.
    Coderoni, L.
    Micciulla, F.
    Rinaldi, G.
    Sacco, I.
    JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 2011, 11 (10) : 9110 - 9117
  • [4] The effect of carbon nanotube orientation on erosive wear resistance of CNT-epoxy based composites
    Chen, Jinhu
    Hutchings, Ian M.
    Deng, Tong
    Bradley, Michael S. A.
    Koziol, Krzysztof K. K.
    CARBON, 2014, 73 : 421 - 431
  • [5] Effect of Carbon Nanotube Addition on the Wear Behavior of Basalt/Epoxy Woven Composites
    Kim, M. T.
    Rhee, K. Y.
    Lee, B. H.
    Kim, C. J.
    JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 2013, 13 (08) : 5631 - 5635
  • [6] Cure behaviour of epoxy resin matrices for carbon fibre composites
    Dispenza, C
    Carter, JT
    McGrail, PT
    Spadaro, G
    POLYMER INTERNATIONAL, 1999, 48 (12) : 1229 - 1236
  • [7] Erosive wear characteristics of high-alumina cenospheres filled epoxy resin composites
    Chen, Ping
    Ma, Feng
    Mei, Hua-Feng
    Zhao, Hai-Lin
    She, Jian-Min
    Beijing Keji Daxue Xuebao/Journal of University of Science and Technology Beijing, 2014, 36 (02): : 218 - 225
  • [8] Effect of CNTs Addition on the Fracture Behaviour of Neat Epoxy and Epoxy-Carbon Fiber-Reinforced Composites
    Shekar, K. Chandra
    Prasad, B. Anjaneya
    Singaravel, B.
    Prasad, N. Eswara
    ADVANCES IN POLYMER COMPOSITES: MECHANICS, CHARACTERIZATION AND APPLICATIONS, 2019, 2057
  • [9] The effect of manufacturing technologies on the flame retardancy of carbon fibre reinforced epoxy resin composites
    Toldy, Andrea
    Pomazi, Akos
    Szolnoki, Beata
    POLYMER DEGRADATION AND STABILITY, 2020, 174
  • [10] Wear behaviour of carbon nanotube reinforced epoxy resin composites
    Jacobs, O.
    Xu, W.
    Schaedel, B.
    Wu, W.
    TRIBOLOGY LETTERS, 2006, 23 (01) : 65 - 75
12345