Printed Dipole Array Fed with Parallel Strip line for Ku-band Applications

This paper presents the design procedure of a printed dipole antenna and 1D array configurations of the single dipole element in the Ku-Band with its metallic reflector plane parallel to the array plane. The proposed antenna has a natural beam tilt which is useful for some specific applications. Several array configurations in 1D are simulated and tested. The effect of mutual coupling among each array elements is also investigated. Required modifications on the individual array element and the feed structures due to the effect of mutual coupling are examined. The single dipole and array of dipole has measured VSWR values smaller than 2 in the Ku-Band with simulated gains of 5.7 dBi and 12 dBi, respectively. All the simulations are performed with ADS-2006A software and measurements are performed in an anechoic chamber.